Tubing Connectors and Fittings
THERMO SCI 3P AIG PARTS & ACCESSORIES AIR LINE CONNECTOR POLYPROP
NC2611462 AIR LINE CONNECTOR POLYPROP
Chemglass Life Sciences Adapter, Vacuum/Inert Gas, 24/40 Inner Joint, PTFE Stpk, Airfree, Schlenk
Adapter, Vacuum/Inert Gas, 24/40 Inner Joint, PTFE Stpk, Airfree, Schlenk. Similar to AF-0509, adapter has a T-Bore stopcock permitting vessels having a standard taper outer joint to be purged and evacuated. Available with a choice of a 4mm glass high vacuum stopcock having a Stainless Steel constant pressure retention device or 4mm PTFE stopcock.
Chemglass Life Sciences Adapter, Vacuum Filtration, 38mm ID Flange, #4 Pluro Stopper, 24/40 Lower Vacuum Assembly, Overall Height 230mm
Adapter, Vacuum Filtration, 38mm ID Flange, #4 Pluro Stopper, 24/40 Lower Vacuum Assembly, Overall Height 230mm. Adapter used for reduced pressure filtration with plain stem Buchner funnels. Top is flared to accept the listed size pluro stopper. The hose connection has an O.D. of 10mm at the largest serration. ADAPTER IS NOT SUPPLIED WITH RUBBER PLURO STOPPER, See CG-1401.
Bia Separartions Inc ADAPTERS PEEK TC 25MM TO 10-32
Adapters PEEK, TC 25 mm to 10-32 UNF cone female (pack of 2)
Chemglass Life Sciences Adapter, Flushing, 24/40 Inner Joint, 4mm Glass Stpk, Airfree, Schlenk
Adapter, Flushing, 24/40 Inner Joint, 4mm Glass Stpk, Airfree, Schlenk. Adapter allows vessels to be flushed with inert gas while sampling directly thru the bore of the T-Bore stopcock. Available with a choice of a 4mm high vacuum glass stopcock having a Stainless Steel constant pressure retention device or a 4mm PTFE stopcock. Both the glass and PTFE stopcock have 9mm OD medium wall arms for use with CG-3022-05 red or CG-3022-22 white septum stopper. PLEASE NOTE: NOT SUPPLIED WITH SEPTUM STOPPER.
Chemglass Life Sciences Adapter, Universal, Inlet, 24/40 Inner Joint, #12 Chem-Thread
Adapter, Universal, Inlet, 24/40 Inner Joint, #12 Chem-Thread. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters. Will accept glass, metal or heavy wall plastic tubes having diameters between 7 to 18mm O.D. such as thermometer wells, gas dispersion tubes, plain stem funnels, etc. Adapters are supplied complete with a Celcon compression cap and Viton o-ring.
Chemglass Life Sciences MPC Body x MPC Back-to-Back Body Adapter - Polycarbonate MPC-to-MPC quick-connect coupling for tubing assemblies
The MPC Body x MPC Back-to-Back Body Adapter is a compact, non-valved quick-connect coupling designed to join two MPC coupling halves in a back-to-back configuration, providing a low-profile, kink-resistant connection for single-use and bioprocess tubing assemblies.
- Polycarbonate construction with purple tint and USP Class VI compatibility.
- Allows coupling halves to rotate when connected to reduce tube kinks.
- Suitable for bioprocess and single-use assemblies where compact connections are required.
- Sterilizable by autoclave, EtO, e-beam, or gamma sterilization methods.
- Packaged in quantities of 25 for assembly and production use.
Chemglass Life Sciences Adapter, Connecting, 45/50 Top Outer, 24/40 Lower Inner, Enlarging
Adapter, Connecting, 45/50 Top Outer, 24/40 Lower Inner, Enlarging. Used to connect dissimilar standard taper joint sizes. Lower inner joint is smaller in size than the top outer joint.
Chemglass Life Sciences Adapter, Thermometer, Inlet, 14/20 Inner Joint, 55mm Height
Adapter, Thermometer, Inlet, 14/20 Inner Joint, 55mm Height. Adapter has a tubulation at the top for use with a CG-1040 rubber fitting. Fitting permits insertion of plain stem thermometers or bleed tubes. Supplied complete with one CG-1040 rubber fitting.
Chemglass Life Sciences Adapter, Connecting, 19/22 Top Outer, 24/40 Lower Inner, Reducing
Adapter, Connecting, 19/22 Top Outer, 24/40 Lower Inner, Reducing. Used to connect dissimilar standard taper joint sizes. Lower inner joint is larger in size than the top outer joint.
Chemglass Life Sciences 24/40 Adapter Complete with Tubing, Stopcock and Fittings
24/40 Adapter Complete with Tubing, Stopcock and Fittings. Sampling adapter for use with a 24/40 outer joint on the reaction kettle lid. Adapter is supplied complete with a 90° bore valve enabling connection to a luer type syringe for product sampling. Adapter has three inlets for use with 1/8” OD PTFE tubing or optional 5mm OD silicone septa. Adapter and valve have 1/4”-28 female threads. Adapter is supplied complete with (3) CG-1164-N-02 Nuts, (3) CG-1164-F-02 ferrules and (2) CG-1166-10 solid plugs. Sampling valve is also supplied complete with nuts and ferrules. See CG-1037-16 for pierceable silicone septa.Complete adapter is supplied with 90° valve, 3-port 24/40 PTFE Adapter and 10ft of 1/8” OD PTFE tubing.
Chemglass Life Sciences Female Luer Adapter, 1/4"-28 Male Thread
Female Luer Adapter, 1/4"-28 Male Thread. Replacement female luer adapter for item CG103710. Complete adapter (CG103710) is supplied with 90¿ valve, 3-port 24/40 PTFE Adapter and 10ft of 1/8¿ OD PTFE tubing.
Chemglass Life Sciences Stopper, Pennyhead, Hollow, 10/30
Stopper, Pennyhead, Hollow, 10/30. Hollow stopper with closed bottom.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, Nylon, Straight, Male Luer Lock to Hose Barb Adapter, 1/4"" ID; 25/PK
Hose barbs are available from 1/16" to 1/4" with either male or female luer connections. Male luer connections are available with either integral lock ring or separate lock ring.
Chemglass Life Sciences Adapter, Claisen, 29/42 Joint Size, 175mm H x 105mm W
Adapter, Claisen, 29/42 Joint Size, 175mm H x 105mm W. Outer standard taper joints on both top arms and lower inner joint. All three joints are the same size.