Tubing Connectors and Fittings
Chemglass Life Sciences Adapter, Flushing, 14/20 Inner Joint, PTFE Stpk, Airfree, Schlenk
Adapter, Flushing, 14/20 Inner Joint, PTFE Stpk, Airfree, Schlenk. Adapter permits vessels to be purged with an inert gas during sampling or transfer with a AF-0519 cannula. Available with a choice of a 4mm high vacuum glass stopcock having a Stainless Steel constant pressure retention device or a 4mm PTFE stopcock. Both the glass and PTFE stopcock have 9mm OD medium wall arms for use with CG-3022-05 red or CG-3022-22 white septum stopper. Additional arm is provided for connection to inert gas source. Supplied with two CG-3022-05 red septum stopper.
Chemglass Life Sciences Adapter, Vacuum/Inert Gas, 14/20 Inner Joint, PTFE Stpk, Airfree, Schlenk
Adapter, Vacuum/Inert Gas, 14/20 Inner Joint, PTFE Stpk, Airfree, Schlenk. Similar to AF-0509, adapter has a T-Bore stopcock permitting vessels having a standard taper outer joint to be purged and evacuated. Available with a choice of a 4mm glass high vacuum stopcock having a Stainless Steel constant pressure retention device or 4mm PTFE stopcock.
Chemglass Life Sciences Adapter, Solid Addition, Merlic, 14/20 Joint Size, Airfree, Schlenk
Adapter, Solid Addition, Merlic, 14/20 Joint Size, Airfree, Schlenk. Adapter permits addition of solids into multi-neck flasks in a dry box, or addition of non-air sensitive compounds into flasks while purging with an inert atmosphere. Can handle from 50mg to 1 gram of solids and is made with a drip tube to avoid getting the solids on the joint or the wall of the flask.** Design Suggested By Dr. Craig Merlic, University Of California, Los Angeles, CA
Chemglass Life Sciences Adapter, Connecting, Airfree, Schlenk, (2) 14/20 Outer Joints, (1) 14/20 Inner Joint
Adapter, Connecting, Airfree, Schlenk, (2) 14/20 Outer Joints, (1) 14/20 Inner Joint. A 3-way adapter for the connection of 3 vessels with two top outer joints and a lower inner joint, all being the same size.
Chemglass Life Sciences Adapter, Connecting, Style A, 14/20 Joint Size, Airfree, Schlenk
Adapter, Connecting, Style A, 14/20 Joint Size, Airfree, Schlenk. Adapter has a 0-4mm Chem-Vac™ Chem-Cap valve between the top outer and lower inner joints, both of which are the same size. Available in two configurations: Style "A" having the valve mounted in-line, while Style "B" has the valve 90 to the joints with a brace permitting hanging of heavier objects from the line. Overall length of the 14/20 size is approx 135mm while the 24/40 is approx 190mm. This item is style A.
Ace Glass, Inc. COUPLING NYLON 50MM COUPLING NYLON 50MM
50mm nylon coupling for coupling threaded columns together, or coupling threaded columns to end fittings with a single o-ring seal for leak-tight engagement, with hand pressure and no significant size reduction in I.D. Supplied with two FETFE o-rings.
Ace Glass, Inc. Coupling, #15 to #15 Ace-Thred™;, nylon, front seal FETFE; O-rings
15mm diameter thread (#15 Ace-Thred) nylon coupling. For coupling threaded columns together, or coupling threaded columns to end fittings, with single o-ring seal for leak-tight engagement. Supplied with two FETFE o-rings.
Ace Glass, Inc. 50mm adapter, nylon, polyethylene packing support, Luer slip bottom drip
50mm adapter, nylon, polyethylene packing support, Luer slip bottom drip
Ace Glass, Inc. 15mm adapter, nylon, polyethylene packing support, Luer slip bottom drip with flow regulator valve
25mm bottom-drip, Luer-Lok, nylon adapter for use with all #25 Ace- Thred chromatography columns. Bore is 1mm. Supplied with one FETFE O-Ring and one replaceable polyethylene packing support.
Ace Glass, Inc. Joint insert, PTFE, standard taper outer, 71/60, for 6467-03flat stainless steel head sample port
Joint insert, PTFE, standard taper outer, 71/60, for 6467-03flat stainless steel head sample port
Ace Glass, Inc. Adapter, #11 Ace-Thred™; to 1/16in FNPT, 0.2460mmdrill-thru, PTFE
Adapter, #11 Ace-Thred™; to 1/16in FNPT, 0.2460mmdrill-thru, PTFE
AVANTOR MASTERFLEX (VWR LLC) John Guest Tee Fittings, for 3/8"" OD Tubing, Acetal, 10/Pk
A single fitting offers secure connections and quick disconnection¿no need to purchase two fitting halves. Simply push tubing past the O-ring to the internal tube stop¿steel teeth on the collet grip tubing for leakproof connections. To disconnect, press collet against fitting body to disengage steel teeth¿ tubing slides right out. Fittings work with semirigid plastic (polypropylene, polyethylene, nylon) and soft metal (brass, copper, mild steel) tubing. To connect flexible tubing such as Tygon or silicone, order soft tube supports.