Chromatography Tubing
Microsolv Technology Corporation Tubing, PEEK, 0.007" ID, 1/16" OD, HPLC grade, yellow stripe. 5-meter roll. 1 EA.
This HPLC Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The yellow stripe indicating size is applied to the outside of the tubing leaving the interior all-natural PEEK which eliminates color leachables. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color Code: Yellow Stripe for 0.007" ( 0.18mm ) ID. Pressure rating: 5800 psi with proper mobile phase conditions.
Microsolv Technology Corporation Tubing, PTFE, 0.020" ID, 1/16" OD, Low Pressure. 5 Meter Roll. 1 EA.
This MicroSolv PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump such as with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm Color: Natural PTFE, Translucent ID: 0.020" ( 0.50mm ) Pressure rating: 725 psi.
Thermo Scientific Advanced nanoViper Fingertight Fitting Systems 50 μm | | 1 EA
Ensure optimal separations and maximize your liquid chromatography LC instrument performance with virtually zero-dead-volume connections. Advanced capillaries extend the use case based on application requirements.
IDEX Health & Science Upchurch TUBING .010 X 5CM
Idex Stainless-Steel Tubing 1/16 in. OD with Blue Band, Diameter Inner: 0.25 mm, 1/16 in., Overall Length: 5 cm, 2 in., 316 Stainless Steel, Diameter Outer: 0.010 in., Pressure: 19,700 psi (1358 bar)
IDEX Health & Science Upchurch TUBING .005 X .062 X 20CM
Idex Stainless-Steel Tubing 1/16 in. OD with Red Band, Diameter Inner: 0.125 mm, 1/16 in., Overall Length: 20 cm, 8 in., 316 Stainless Steel, Diameter Outer: 0.005 in., Pressure: 21,600 psi (1489 bar)
Cole-Parmer Digi-Sense Type T Hermetically Sealed Tip Insulated Thermocouple, 20ft L, 24 Awg
Do not subject type J exposed-junction probes to moisture as they will rust
TRAJAN SCIENTIFIC AMERICAS INC IDEX PEEK BLUE TUBING-1/16X.01
501871266 IDEX PEEK BLUE TUBING-1/16X.01
TRAJAN SCIENTIFIC AMERICAS INC IDEX PEEK RED TUBING-1/16X.005
501871273 IDEX PEEK RED TUBING-1/16X.005
IDEX Health & Science Upchurch PTFE TUBING .010X.062X50'
Idex FEP Tubing, Diameter Inner: 0.25 mm, 0.01 in., Overall Length: 152.4 m, 50 ft., Natural, Diameter Outer: 0.0625 in., 0.158 cm, DuPont FEP, Certifications/Compliance: ROHS, For Use With: For General, Low Pressure AppliCatIons, Maximum Pressure: 1000 to 3000 psi
IDEX Health & Science Upchurch TUBING PEEK 50' ROLL OF 1536
Idex PEEK Chromatography Tubing, Yellow, Diameter Inner: 0.007 in., Overall Length: 50 ft., Pressure: 7000 psi, PEEK Tubing, For Use With: For High-Pressure Applications