Chromatography Tubing
Microsolv Technology Corporation Tubing, PEEK, Pre-Cut, 0.010" ID, 1/16th" OD, Super-T Grade, Blue Stripe, 30cm Long. 5 PK.
Properly cutting tubing is one of the most difficult tasks in a chromatography laboratory. These Pre-Cut PEEK Tubes are the perfect solution. This Super-T™ grade ( Premium ), PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The broken yellow stripes are added only to the outside of the tubing, leaving the interior all natural PEEK which eliminates leachables due to color. The internal and outer dimensional tolerances of this tubing is +/- 0.025mm. Color Code: Blue, Stripes for 0.010" ( 0.25mm ) ID. Pressure rating: 5600 psi.
Microsolv Technology Corporation Tubing, PTFE, 0.010" ID, 1/16" OD, Low Pressure, Blue. 5 Meter Roll. 1 EA.
This MicroSolv PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump. The blue color can be used to identify different lines often used with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm Color: Blue ID: 0.010" ( 0.25mm ) Pressure rating: 800 psi.
Advanced Materials Technology MARVELXACT PEEKSIL 100 ID
Advanced Materials Technology’s MarvelXACT finger-tight UHPLC connectors with volume definitions easily identifies dispersion volume contribution. Haptic “click” indicates optimum torque and zero dead volume connection. Connector and tubing for both pre and post column installation
Advanced Materials Technology MARVELXACT PEEKSIL 100 ID
Advanced Materials Technology’s MarvelXACT finger-tight UHPLC connectors with volume definitions easily identifies dispersion volume contribution. Haptic “click” indicates optimum torque and zero dead volume connection. Connector and tubing for both pre and post column installation
Microsolv Technology Corporation Tubing, PEEK, 0.020" ID, 1/16" OD, HPLC grade, orange stripe. 25-meter roll. 1 EA.
This HPLC Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The orange stripe indicating size is applied to the outside of the tubing leaving the interior all-natural PEEK which eliminates color leachables. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color Code: Orange Stripe for 0.020" ( 0.50mm ) ID. Pressure rating: 4500 psi with proper mobile phase conditions.
IDEX HEALTH & SCIENCE UPCHURCH PFATUB-1/16ODX.020INID50FT RL
NC1953879 PFATUB-1/16ODX.020INID50FT RL
GOLANDER LLC 3X0.92 SILICONE TUBING, 3MM ID
3x0.92 Silicone Tubing, 3mm ID, 4.84mm OD, 0.92 mm wall thickness
IDEX Health & Science Upchurch TUBING .040 X 5CM
Idex Stainless-Steel Tubing 1/16 in.OD 0.040 in.ID, Diameter Inner: 1.0 mm, 1/16 in., Overall Length: 5 cm, 2 in., 316 Stainless Steel, Diameter Outer: 0.040 in., Pressure: 8100 psi (558 bar)
Thermo Scientific Ion Transfer Tube
Ion transfer tube™ efficiently transfers ionized molecules between mass spectrometry ion source & mass analyzer under vacuum for ion transport, ion detection & analysis of ionized analytes.
Analytical Sales & Services PEEK Tubing - 1/16" OD X .007" ID X 50' Length
PEEK Tubing, .007 x 1/16 in. x 5 in.