Chromatography Fittings
Optimize Technologies EXP™2 Filter Cartridge, 3mm, 0.2µm, 10/pk
The EXP™2 Pre-Column and In-Line Hand-Tight Filters are ideal for protecting small-particle UHPLC columns and systems at extreme pressures. Such techniques analyze samples in the most demanding applications, decreasing the life of expensive hardware. EXP™2 Filters help extend the life of a UHPLC system and protect your investment without sacrificing performance. Free-Turn™ architecture allows the user to change cartridges by hand without breaking fluid connections on the holder inlet/outlet. EXP™2 Pre-Column Filter holders are available with Titanium Hybrid Ferrules for easy direct connection to any 10-32 port. The filter holder is a complete package and includes fittings to provide repeated zero-dead-volume connections. Use with holder part number 15-04-05242 or 15-04-05258.
Optimize Technologies EXP™2 Filter Cartridge, 3mm, 0.2µm, 5/pk
The EXP™2 Pre-Column and In-Line Hand-Tight Filters are ideal for protecting small-particle UHPLC columns and systems at extreme pressures. Such techniques analyze samples in the most demanding applications, decreasing the life of expensive hardware. EXP™2 Filters help extend the life of a UHPLC system and protect your investment without sacrificing performance. Free-Turn™ architecture allows the user to change cartridges by hand without breaking fluid connections on the holder inlet/outlet. EXP™2 Pre-Column Filter holders are available with Titanium Hybrid Ferrules for easy direct connection to any 10-32 port. The filter holder is a complete package and includes fittings to provide repeated zero-dead-volume connections. Use with holder part number 15-04-05242 or 15-04-05258.
Optimize Technologies Pump Seal Shimadzu, ITB™, LC-10ADVP, -10AD,-600, 20ABXR, 20ADXR
Optimize Piston Seals are the longest lasting seals on the market. Machined from either of two proprietary polymer blends, UHMW-PE or ITB, Optimize Seals provide the ultimate in high pressure sealing capacity. For mostly aqueous buffered mobile phases, PTFE-based Improved PTFE Blend (ITB) seals are a superior choice for applications with elevated temperatures, high organic content, or when the broadest possible solvent compatibility is required. ITB™ seals tend to be softer than those made from UHMW-PE, making them more forgiving at high pressures where piston side-loading or misalignment may occur. This softer nature also leads to more shedding, but the ITB™ proprietary blend is designed to shed particles that are large enough to be caught at the surface of a standard 2µm frit, not embed within it. This item is equivalent to OEM part numbers 228-18745-00 and 228-35146-00.
Optimize Technologies OPTI-LYNX™ In-Line Holder (fittings and tubing included)
Combining a versatile selection of packed beds and the use of a convenient quick-connect holder, Opti-Lynx™ provides numerous options for chromatographers for on-line or off-line sample clean-up and pre-concentration. Two styles of holders are available: The Opti-Lynx™ Micro system offers full biocompatibility in the in-line version while the direct-connect configuration threads conveniently into all 10-32 ports. Bed volumes range from 4uL to 40uL along with a wide range of standard and custom packings. Opti-Lynx traps are the ideal tool for optimizing your technique, whether you want to separate a peptide digest from its matrix for further analyses, or prepare a dilute small molecule sample for LC injection without loss of sample. These columns may be loaded and regenerated repeatedly for maximum value. This product includes OPTI-LOK™ fittings and tubing.
Optimize Technologies OPTI-SEAL™, Shimadzu LC-600,-9A, -10AD, -10ADVP, 2010, 20ABXR, 20ADXR
Optimize Piston Seals are the longest lasting seals on the market. Machined from either of two proprietary polymer blends, UHMW-PE or ITB, Optimize Seals provide the ultimate in high pressure sealing capacity. For mostly aqueous buffered mobile phases, Opti-Seal™ UHMW-polyethylene is the wisest choice. Specially designed to be more resistant to abrasion and wear than standard polyethylene seals, they can last up to seven times longer under mostly aqueous conditions. Despite the UHMW-PE's durability, it has a coefficient of friction approaching that of PTFE. The homogenous polymer nature leads to less shedding, but when it does occur, a larger, more fibrous particle is produced which is easily caught by a filter frit. This item is equivalent to OEM part numbers 228-32628-91, 228-18745-00, and 228-35146-00.
AB Sciex LLC PEEK Fitting (10-32 X 1/16 Inch)
PEEK fittings are compatible with all HPLC solvents (avoid concentrated sulfuric and nitric acids), and can be used at temperatures to 150° C. Unlike stainless steel ferrules, PEEK ferrules do not permanently lock into place on the tubing. This allows you to interchange fittings with tubing and columns, from manufacturer to manufacturer and still form a zero dead volume, leak-free connection.
Thermo Scientific Viper Fingertight Fitting Systems | Stainless Steel | 1 EA
- Ferrule-free tightening design for virtually zero-dead-volume connections- Operates at pressures up to 1310 bar- Suitable for temperatures up to 120C- Easy to Install- Fingertight design- Flexible stainless-steel 1/32 in OD- No tools required- Flexible- Compatible with valves and columns from virtually any manufacturer- Fits narrow connections such as 10-port valves- Available in different materials, lengths, and inner diameters
Thermo Scientific Thermostat, 220/240V 10A 1pc
1/16 inch 0.25 meter 2 port to 6 port rotary cross connection valve for flow control between multiple inlet and outlet ports with low dead volume for fluid handling in chromatography systems and analytical instrumentation.
Thermo Scientific Sample Loop, NanoViper
5μL Dionex UltiMate 3000 Pulled Loop Autosampler WPS-3000(T)PL RS, maximum pressure: 14503 psi (1000 bar)
Thermo Scientific nanoViper Fingertight Fittings | | 1 EA
- Virtually zero-dead-volume connections ensure optimal separation efficiencies- Preassembled and finger-tightened for easy tool-free instrument setup- High-pressure tested, compatible up to 1200 bar (17400 psi)
Thermo Scientific nanoViper Fingertight Fittings | | 1 EA
- Virtually zero-dead-volume connections ensure optimal separation efficiencies- Preassembled and finger-tightened for easy tool-free instrument setup- High-pressure tested, compatible up to 1200 bar (17400 psi)
Thermo Scientific nanoViper Fingertight Fittings | | 1 EA
- Virtually zero-dead-volume connections ensure optimal separation efficiencies - Preassembled and finger-tightened for easy tool-free instrument setup and configuration - High-pressure tested for UHPLC compatibility up to 1200 bar (17400 psi)
Thermo Scientific nanoViper Fingertight Fittings | | 1 EA
Virtually zero-dead-volume connections; Preassembled and finger-tightened; High-pressure tested up to 1200 bar (17400 psi); Easy tool-free instrument setup and configuration; Prevents overtightening; Suitable for temperatures up to 120C; Compatible with valves and columns from virtually any manufacturer; Available in different materials, lengths, and inner diameters
Thermo Scientific nanoViper Fingertight Fittings | | 1 EA
- Virtually zero-dead-volume connections ensure optimal separation efficiencies- Preassembled and finger-tightened nanoViper fingertight fittings enable easy tool-free instrument setup and configuration and prevent overtightening- High-pressure tested to provide UHPLC compatibility up to 1200 bar (17400 psi)