Chromatography Fittings
Thermo Scientific Dionex ASE 150/350 Cellulose Thimbles | | Pack of 25
- High-purity cellulose thimbles hold solid and semisolid samples in the extraction system, prevent plugging, and provide reliable and reproducible results. - Made from alpha cellulose, these thimbles have excellent mechanical strength. - The thimbles' dimensions accurately match Dionex ASE 350/150 System Extraction Cells to ensure an optimum fit during accelerated solvent extraction. - Simplifies cell cleaning when extracting sticky samples or samples that melt at high temperatures. - Enables direct weighing of samples and avoids sample loss during transfer. - Prevents fine particulate samples from clogging the cell.
Research Products International Corp DuraSeal Laboratory Stretch Film, 4 Inch x 250 Feet
DuraSeal is a durable, heat and solvent resistant stretch film with substantial advantages over common laboratory stretch films. Superior heat resistance allows it to be used for covering containers in boiling water baths. DuraSeal is polyethylene based and free of any adhesives. It resists essentially all organic solvents and caustic agents. The film can be stretched 500-800% before tearing, minimizing the incidence of tearing during stretch sealing.
DuraSeal is easy to use without the interleaf paper to strip away. Just stretch the film over a container opening. The film contracts inwardly to provide a drum tight liquid proof stretch seal. The film clings to itself, especially after stretching. DuraSeal cuts easily with sharp scissors or razor blade.
Thermo Scientific Flex Cap Viper MP35N 1pc
A flexible MP35N nickel-cobalt-chromium-molybdenum alloy cap that seals injection ports and connectors on gas chromatography columns and instruments, replacing part 6041.7892 on specified gas chromatography systems.
Trajan Scientific VICI Valco Stator Cheminert 6 Port Injection PEEK 0.40mm (VAL.C2V-2C46) For PAL.VLV6PK
VICI Valco Stator PEEK For PAL.VLV6PK [VICI Valco PN: C2V-2C46] (NEW LPP PN: VAL.C2V-2C46). Made in the USA.
IDEX Health & Science Upchurch COLUMN COUPLER UPTIGHT
Idex Universal Column Couplers, For Use With: F-100 KEL-F Fingertights w/0.007 in. I.D., Connect Column w/Internal 10-32 Threads to Precolumn or Guard Column w/10-32 Threads, Swept Volume: 1.3 uL
IDEX Health & Science Upchurch CARTRIDGE HOLDER BP W/F-300
Idex Back Pressure Regulators: Cartridge Holders, Description: High pressure; For 1/16 in. OD tubing, For Use With: Back Pressure Regulators
New Jersey Fluid Systems LLC SWAGELOK SS-8-TA-1-4
Stainless Steel Swagelok Tube Fitting, Male Tube Adapter, 1/2 in. Tube OD x 1/4 in. Male NPT
Optimize Technologies OPTI- TRAP™ Micro Trap Cartridge, Small Molecule, 5µL, 1mm, 6pk
The OPTI-TRAP™is a bi-directional trap cartridge system which is used individually or in a series for sample concentration and purification. The OPTI-TRAP™ system features a durable biocompatible trap holder assembly made of either PEEK (capillary configuration) or stainless steel with a PEEK flow path (micro and macro configurations). OPTI-TRAPs feature low back pressure and are loaded and eluted manually with a syringe or on-line when plumbed into the sample injection valve. Additionally OPTI-TRAPs include titanium frits for full biocompatibility and custom packing is also available upon request. The cartridges are available in three different sizes: 50uL, 5.0uL & 0.5uL and can be purchased as singles or in 6 packs.
Waters Corp Tubing Assembly, Offset 'U' Column Connection, .004 ID
Tubing Assembly, Offset 'U' Column Connection, .004 ID
Optimize Technologies EXP2 Replacement Stems, 1.5µL, 2.7µm HALO, C8, 3pk
Specialized features, patented technology, precision engineering and state-of-the-art manufacturing make the new EXP2 Stem Trap an unbeatable choice for ultra high-pressure trapping applications. Its slim architecture allows it to easily fit into crowded instrument compartments or to connect directly to tightly-spaced injection ports. When tightened by hand, the EXP2 Stem Trap seals to 8,700+ psi. Additionally, the product can be wrench tightened to 20,000+ psi (1,400+ bar). The unique packed floating stem installs directly into any 10-32 port and automatically adjusts to provide a perfect ZDV connection. The new EXP2 design incorporates an integral ferrule into the front-end of the holder so there is no separate ferrule to lose! The replacement stems are also low volume/ low-dispersion, intended for many repeat uses and is available with various bed volume and custom packing options. This product is recommended for nano flow applications. For use with EXP™2 Stem Holder Only
Optimize Technologies EXP™2 6-32 TI-LOK Fitting for all 1/32" OD Tubing, 10pk (10 EXP™2 TI-LOK fittings & 1 EXP™2 Driver)
The EXP™2 TI-LOK Fittings offer capillary HPLC and UHPLC connections rated to 20,000+ psi in any port and easily fit into tight spaces such as injection valves, column couplers, sample loops and column ovens. The Hand-Tight fittings allow users the versatility to change out capillary tube ID, length or end fittings to create any tube set configuration. Available with 10-32 threads for 1/16" ports and 6-32 and 6-40 threads for 1/32” ports. EXP™2 TI-LOK Fittings feature built-in PEEK ferrules and threaded nuts precision machined from titanium. The ferrule does not permanently swage to the tubing, allowing for many repeat connections and the ability to adjust the tubing to different port depths. EXP™2 TI-LOK Fittings are compatible with PEEK, PEEKsil, Hastelloy C and stainless steel tubing. When used with the PEEKsil the fittings create a zero-dead-volume (ZDV) connection without fracturing the fused silica.
Optimize Technologies EXP™2 Filter Cartridge, 3mm, 2µm, 5/pk
The EXP™2 Pre-Column and In-Line Hand-Tight Filters are ideal for protecting small-particle UHPLC columns and systems at extreme pressures. Such techniques analyze samples in the most demanding applications, decreasing the life of expensive hardware. EXP™2 Filters help extend the life of a UHPLC system and protect your investment without sacrificing performance. Free-Turn™ architecture allows the user to change cartridges by hand without breaking fluid connections on the holder inlet/outlet. EXP™2 Pre-Column Filter holders are available with Titanium Hybrid Ferrules for easy direct connection to any 10-32 port. The filter holder is a complete package and includes fittings to provide repeated zero-dead-volume connections. Use with holder part number 15-04-05242 or 15-04-05258.
Optimize Technologies EXP2 Stem Trap Kit, 0.17µL, 2.7µm HALO, C18
A standard EXP™2 Stem Trap Kit includes (1) EXP™2 Stem Holder and (3) packed stems. Specialized features, patented technology, precision engineering and state-of-the-art manufacturing make the new EXP2 Stem Trap an unbeatable choice for ultra high-pressure trapping applications. Its slim architecture allows it to easily fit into crowded instrument compartments or to connect directly to tightly-spaced injection ports. When tightened by hand, the EXP2 Stem Trap seals to 8,700+ psi. Additionally, the product can be wrench tightened to 20,000+ psi (1,400+ bar). The unique packed floating stem installs directly into any 10-32 port and automatically adjusts to provide a perfect ZDV connection. The replacement stems are low volume/ low-dispersion, intended for many repeat uses and is available with various bed volume and custom packing options. This product is recommended for nano flow applications.