Gas Regulators
HARRIS PRODUCTS GROUP 9296NC-15-320 C02 GAS REGULATO
The Model 9296 Multi-StageTM regulator is designed for applications where a constant delivery pressure is required over a wide range of inlet pressures. A standard for general purpose laboratory, industrial and welding applications where neoprene diaphrag
Perkin Elmer US LLC Dual Stage High Purity Brass Regulator for He, Ar, and N2
PerkinElmer regulators are constructed of high purity brass barstock and have stainless steel diaphragms and metal-to-metal seals. They are suitable for use with high purity (>99.995% pure), noncorrosive gases. All regulators are supplied with standard CGA fittings. It is recommended that you consult your local gas supplier to determine the proper tank regulator required. All regulators have an outlet shutoff valve and terminate in a 14 inch NPT Swagelok fitting. They are designed for use with high purity carrier gas and feature a barstock body construction, stainless steel diaphragms, and metal-to-metal seals. Technical Specifications: Delivery Pressure Use: He, Ar, N2 Delivery Pressure Range: 4-100 psig Cylinder Pressure Gauge: 0-200 psig Gauge: 0-3,000 psig
Grainger 1/4 in General Purpose Air Regulator , 15 cfm Max. Flow - Regulators
Features a modular connector that allows easy removal and swap out, plus 2 full-flow gauge ports. Manifold regulator provides multiple pressures from a common inlet. For Max. Flow, the CFM flow is measured with 150 psig inlet adjusted to set pressure of 90 psig (while increasing flow) and a 15 psig drop.
Grainger SPEEDAIRE Filter Regulator, 1/4 in NPT
The Speedaire 1/4 in. NPT Filter Regulator is a combination filter and pressure regulator designed to remove dirt, pipe scale, and water from compressed air in industrial compressed air systems. It features a die-cast aluminum body construction with 1/4 in. NPT inlet and outlet ports. The filter element is rated for 40 micron filtration. The pressure regulator is adjustable from 0-125 psi. This filter regulator unit provides both particle removal and pressure regulation in one compact unit. It is suitable for point-of-use installation in industrial compressed air systems.
Sigma Aldrich Fine Chemicals Biosciences Aldrich(R) non-corrosive lecture-bottle gas regulator size, CGA Inlet size 180 | 1EA
Aldrich(R) non-corrosive lecture-bottle gas regulator size, CGA Inlet size 180 | 1EA
Thermo Scientific Overpressure Relief Valve 60BAR 1EA
Overpressure relief valve with VH-D1 valve configuration and 60 bar set pressure opens and vents excess fluid when system pressure exceeds 60 bar, protecting equipment from damage until pressure drops below valve's reseat pressure.
Werther International PC106 SILENT COMPRESSOR 115V
Quiet oil free compressor, PC106 115V/60Hz, Output 4.4 CFM / 110 l.min, Max Pressure 120 PSI, Noise Level 57 dB/A, 1.57 Gal air tank, 2 year warranty, Dimensions 24 in.L x 14 in.W x 23 in.H
Werther International P50/24 SILENT COMPRESSOR 115V
Silent air compressor, P50/24AL 115V/60Hz, Output 2.1 CFM / 60 l.min, Max Pressure 120 PSI, Noise Level 40 dB/A, 6 Gal air tank, 2 year warranty, Dimensions 17 in.L x 17 in.W x 20 in.H
Sheldon Manufacturing Inc Nitrogen Regulator
Nitrogen tank regulator for use with select manufacturig runs of Bactron anaerobic or Bactrox hypoxia chambers. Includes fittings and 0.170" I.D. black poly tubing.
McMaster-Carr Filter Element for Pipe-Fitting Hydraulic Oil Filter, 10 Micron
Also known as filter elements. They fit snugly inside compact inline hydraulic fluid filters. Include two O-rings.
ATLANTIC BIOPHARM SOLUTIONS LLC MATHESON 3450 SERIES LINE REG
Matheson Model 3450 Series High-Purity/High Flow Stainless Steel Line Regulator, 1/4in FNPT connections, 4-100 psig delivery pressure range, 316 SS body, trim, diaphram, teflon seat, .6 Cv, outlet gauge 30in vac-0-200 psig, cleaned for O2 service
Cole-Parmer Pressure Regulator, 1/4" NPT(F), 2-120 psi
Marsh Bellofram 960-015-000 Pressure Regulator, 1/4" NPT(F), 2-120 psi, Provide precision control in adverse conditionsUse with clean, dry airIdeal for gas mixing, valve operations, and calibration stands