HPLC Columns and Cartridges
Waters Corp XBridge BEH C18 Prep Column, 10 μm, 300 Å
Waters XBridge BEH C18 Prep Column, 10 μm, 300 Å
Waters Corp XBridge Glycan BEH Amide Column, 130Å, 3.5 μm, 2.1 mm, 50 mm
The Glycan BEH Amide Column utilizes BEH-based Glycan chemistry, offering highly scalable particle sizes suitable for both UPLC and HPLC applications. Each batch is rigorously quality control tested with a 2-AB labeled Glycan Performance standard to ensure batch-to-batch consistency and highly similar separated glycan profiles. This allows chromatographers to select the most appropriate LC-based technology for their specific released glycan analysis needs.
- Ensures batch-to-batch consistency and highly similar separated glycan profiles.
- Allows chromatographers to select the most suitable LC-based technology for specific released glycan analysis application needs and laboratory instrumentation.
- Offers optimal compatibility with instruments, leading to consistent performance, precise and reproducible results, and maintained system compliance.
- Supports glycan analysis applications.
Waters Corp XSelect VanGuard Cartridge, C18, 5 μm, 100 Å, 3.9 mm X 5 mm
XSelect HSS C18 VanGuard Cartridges protect analytical columns by removing particulate contamination. Optimized for 4.6 mm I.D. columns with 5 μm sorbent, they feature HSS (High Strength Silica) for enhanced chromatographic performance, higher polar compound retention, and varied selectivity. These cartridges resist UPLC pressures and are scalable to UPLC separations.
- C18 chemistry, reversed phase separation
- Silica spherical particles
- pH range of 1 to 8
- Maximum pressure of 18000 psi (1240 Bar)
- Endcapped with low silanol activity
- 100 Å pore size
- 3.9 mm inner diameter, 5 mm length
- Packaged as 3 units per package
Waters Corp VanGuard Cartridge, 100Å, 3.5 μm, 2.1 x 5 mm, C8
Symmetry C8 VanGuard Cartridges extend analytical column lifetime and performance by removing particulate contamination from the mobile phase stream. This cartridge is optimized to protect all 2.1 mm and 3.0 mm I.D. analytical columns containing 3.5 μm sorbent particles. It acts as a barrier between the injector and the analytical column, improving efficiency by obstructing the entry of chemical impurities and suspended particles.
- Made from the same packing material as C8 columns.
- Manufactured in a cGMP, ISO 9001-certified facility for quality and durability.
- Each packing material batch is chromatographically tested to high standards.
- Equipment tested for peak performance, enhancing selectivity, sensitivity, and speed.
- High-performance packing materials ensure long-term preservation.
- Designed for biological fluid cleanup and temperature control.
Waters Corp Spherisorb Phenyl OBD Prep Column, 80Å, 10 μm, 10 mm X 250 mm
This column contains a non-endcapped silica-based Phenyl phase that provides unique compound selectivity for reversed-phase applications.
- Chemistry: Phenyl
- Separation mode: Reversed phase
- Particle substrate: Silica
- pH range: 2 to 8 pH
- Temperature limits: 45 °C
- Maximum pressure: 6000 psi (415 Bar)
- Endcapped: No
- Silanol activity: High
- Particle shape: Spherical
- Particle size: 10 μm
- Endfitting type: Standard
- Pore size: 80 Å
- Format: OBD prep column
- Surface area: 220
- System: HPLC preparative
- Technique: LC/MS, LC
- USP classification: L11
- Inner diameter: 10 mm
- Length: 250 mm
- Carbon load: 3 %
- Units per package: 1 pk
Perkin Elmer US LLC Brownlee SPP C18 Column - 100 mm , 2.1 mm I.D.
High purity, general purpose Octadecyl (C18) phase with wide selectivity. Recommended for the reverse phase separation of acidic, basic, or neutral compounds.
Waters Corp Waters Method Validation Kit, CSH C18, 1.7 μm, 2.1 x 100 mm, 130 Å
This method validation kit contains three columns, designed to improve peak shape and loading capacity for basic compounds, and enable fast column equilibration. The hardware technology reduces unwanted analyte/surface interactions, preventing poor peak shape and signal intensity losses.
- Overcome peak shape asymmetry and poor loading capacity for basic compounds when using low ionic strength mobile phase.
- Enable fast column equilibration when switching from low to high pH mobile phases.
- Hardware technology significantly reduces unwanted analyte/surface interactions.
- Reduces unwanted analyte/surface interactions that can lead to poor peak shape.
- Minimizes losses in signal intensity due to surface interactions.