HPLC Guard Columns and Cartridges
MilliporeSigma™ Supelco™ Ascentis™ Express C18 Micron Guard Cartridge, 2.7 μm Particle Size
Ascentis™ Express Guard Columns provide physical (filtration) and chemical protection for costly analytical columns without compromising the very high performance of Ascentis™ Express columns.
MilliporeSigma™ Supelco™ Ascentis™ Express HILIC Guard Cartridge, 2.7 μm Particle Size
Ascentis™ Express Guard Columns provide physical (filtration) and chemical protection for costly analytical columns without compromising the very high performance of Ascentis™ Express columns.
MilliporeSigma™ Supelco™ Guard Cartridge Holder for BIOshell™ Guard Column
This Guard Cartridge Holder can be used with 4.6 mm, 3.0 mm and 2.1 mm ID BIOshell™ columns.
MilliporeSigma™ Supelco™ Astec™ Cellulose DMP Chiral HPLC Guard Cartridge, 5 μm Particle Size
Guard cartridges to protect Astec™ Cellulose DMP columns.
MilliporeSigma™ Supelco™ SUPELCOGEL™ 8Pb, 8% Crosslinked HPLC Guard Column, 9 μm Particle Size
Offers excellent separation of many common samples.
MilliporeSigma™ Supelco™ OPTI-GUARD™ C8 1 mm Guard Column
OPTI-GUARD™ sets the standard for low-impact, easy to use pre-column protection.
MilliporeSigma™ Supelco™ SUPELCOSIL™ LC-NH2 Supelguard Cartridge, 5 μm Particle Size
SUPELCOSIL™ LC-NH2 Supelguard™ Cartridges contain a SUPELCOSIL™ packing, in a 2 cm stainless steel body, enclosed by polyether ether ketone (PEEK) encapsulated stainless steel frits (2 μm porosity).
MilliporeSigma™ Supelco™ SUPELCOSIL™ LC-Si Supelguard Cartridge Kit, 5 μm Particle Size
A typical mobile phase used with normal-phase silica columns consists of a hydrocarbon solvent such as hexane or heptane, mixed with a relatively small percentage of more polar solvent.
MilliporeSigma™ Supelco™ SUPELCOSIL™ LC-18-DB Supelguard Cartridge, 5 μm Particle Size
SUPELCOSIL™ LC-18-DB Supelguard™ Cartridges contain a SUPELCOSIL™ packing, in a 2 cm stainless steel body, enclosed by polyether ether ketone (PEEK) encapsulated stainless steel frits.
MilliporeSigma™ Supelco™ SUPELCOSIL™ LC-18-DB Supelguard Cartridge Kit, 5 μm Particle Size
SUPELCOSIL™ LC-18-DB Supelguard™ Cartridges contain a SUPELCOSIL™ packing, in a 2 cm stainless steel body, enclosed by polyether ether ketone (PEEK) encapsulated stainless steel frits.
MilliporeSigma™ Supelco™ Discovery™ HS F5 Supelguard™ Cartridge, 5 μm Particle Size
The Discovery™ HS F5 bonded phase provides reversed-phase separations that are distinctly different from C18 columns. However, compounds will generally elute within the same retention time window, making most C18 methods easily transferable.
MilliporeSigma™ Supelco™ SUPELCOSIL™ LC-8 Supelguard Cartridge, 5 μm Particle Size
Provides less retention of both polar and non-polar compounds than C18.
MilliporeSigma™ Supelco™ SUPELCOSIL™ LC-SCX Supelguard Cartridge Kit, 5 μm Particle Size
The LC-SCX cation-exchange columns have strongly acidic propylsulfonic acid groups and are used for separating cations. Adjust pH, ionic strength, and organic modifier concentration to control retention and selectivity.
MilliporeSigma™ Supelco™ SUPELCOSIL™ LC-18-S Supelguard Cartridge Kit, 5 μm Particle Size
SUPELCOSIL™ LC-18-S Supelguard™ Cartridges contain a SUPELCOSIL™ packing, in a 2 cm stainless steel body, enclosed by polyether ether ketone (PEEK) encapsulated stainless steel frits.