Maintenance Lubricants and Penetrating Fluids
MSC 3-IN-ONE 10038 8 oz Can Mineral Multi-Purpose Machine Oil ISO 22
3-IN-ONE 10038 8 oz Can Mineral Multi-Purpose Machine Oil ISO 22
Chemglass Life Sciences Krytox General Purpose Grease, 2oz Tube
Krytox General Purpose Grease, 2oz Tube. Highly inert, non-flammable grease for use with standard taper joints and glass stopcocks. Insoluble in almost all solvents except Freon 113. Krytox greases have demonstrated an exceptionally high degree of chemical inertness to many highly reactive chemicals. For example Krytox has shown no evidence of reactivity when exposed to: Boiling Sulfuric Acid, Fluorine Gas, Nitrogen, Tetroxide, Chlorine Trifluoride, Hydrogen Gas, Methanol, Ammonia Gas, Ethyl Alcohol, Hydrochloric Acid, Hydrazine, Diethylenetriamine, Phosphoric Acid, Sulfuric Acid, Chlorine, or Hydrogen Peroxide.General Purpose Grade:Krytox GPL general purpose grease for use with standard taper joints, stopcocks and stirrer bearings. Useful at temperatures up to 400 F continuously and 550 F intermittently. Minimum useful temperature is -35 F. Supplied in convenient 2oz tubes.
Ted Pella Inc P3 OIL FOR # 7010 ROTARY PUMP
Clear, monograde oil that has the correct viscosity for Pfeiffer Rotary vacuum pumps, excellent sealing and lubrication properties, low vapor pressure and reduced back streaming. Used also for Prod. No. 7010 and 7010-220 Rotary Pumps. Indefinite shelf life when stored in unopened container at ambient temperatures out of direct sunlight. 1L
PRECISION PLUS VACUUM PARTS INC VP FF VAC PUMP FLUSH FLUID 20L
NC3243560 VP FF VAC PUMP FLUSH FLUID 20L
MSC CRC 1003293 16 oz Trigger Spray Can Nondrying Film/Silicone Penetrant/Lubricant Clear & White, -40°F to 400°F, Food Grade
CRC 1003293 16 oz Trigger Spray Can Nondrying Film/Silicone Penetrant/Lubricant Clear & White, -40°F to 400°F, Food Grade
Sigma Aldrich Fine Chemicals Biosciences Vacuubrand Chemistry vacuu1EA
Three-stage chemistry-design diaphragm pumps are an excellent solution for continuous oil-free pumping of corrosive gases and vapors and meet many difficult requirements. The three-stage construction provides the advantageous combination of high pumping speed and very low ultimate vacuum. All major parts in contact with pumped media are made of chemically resistant fluoroplastics.Well-proven PTFE sandwich diaphragms provide increased reliability and extended operating life. The MD 4C NT with gas ballast valve is optimally prepared for pumping condensable vapors due to the very good ultimate vacuum (even with gas ballast) as well as for high boiling solvents. The new NT-series features further improve performance data and superior vapor tolerance..nbspPump supplied completely mounted ready for use with manual.nbspOutstanding chemical resistance and superior vapor tolerance.nbspExceptionally high performance even at low vacuum.nbspExcellent ultimate vacuum even with gas ballast.nbspMa
Electron Microscopy Sciences EMS Graphite Conductive Adhesive 154 30 GR
Adhesive 154 is an easy-to-apply resistance coating designed to provide high lubricity, conductivity, and excellent release properties to many non-conductive substrates, including most plastics. It is made from a dispersion of colloidal graphite in an isopropanol base which quickly air-dries, forms an uniform thin film adherent layer. Air dries to touch in 5 minutes and is ready for use in 30 minutes. After air drying, bake for 5 minutes at 167 degree F (75 degree C) to achieve optimum coating qualities in a shorter curing cycle.
Leybold Vacuum Products Inc Leybonol LVO 420 Synthetic Oil, 1 L
Synthetic oil (perfluoropolyether PFPE, free of Additivs). Chemically inert. Highest thermal stability. Pumping axidants like oxygen, ozone or nitrous oxides as well as reactive substances like halogens, hydrogen halides and conditionally Lewis acids.