Maintenance Lubricants and Penetrating Fluids
Electron Microscopy Sciences Loctite 409™ Super Bonder Tube 3 GR
General-purpose gel adhesive, clear, gap fills 0.010"; surface insensitive Ethyl, tensile shear strength 3,200 psi, and temperature range -65 deg F to 180 deg F. Cure speed: fixture - 75 seconds, full - 24 hours.
Electron Microscopy Sciences Microtome Oil 50 ML
A chemically pure, high-grade lubricant used in precision instruments. Should be used periodically to lubricate cross-rollerbearings for microtomes.
Electron Microscopy Sciences Edwards Ultragrade 19 4 LT
Edwards Ultragrade 19 Oil is specially recommended for use in clean pumping applications. The oil offers reduced maintenance cost, longer fluid life, and a cooler running pump.
Electron Microscopy Sciences Santovac 5 for Ultra High Vacuum Range 500 ML
A Polymethyl Ether, designed for an ultra high vacuum range: 10-10 torr. Ultra low vapor pressure results in low ultimate pressures; there is no need for a cold trap and it is suitable for diffusion pumps. Santovac 5 may discolor with use but it will maintain its physical properties.
Electron Microscopy Sciences Crystalbond™ 509 Stick, Amber 90 GR
A temporary adhesive. These wash away adhesives are used as a temporary bond for holding delicate crystals, metallurgical specimens, glass components, and ceramic substrates for dicing, slicing, drilling and polishing. These materials adhere readily to metals, glass, ceramic and then can be washed after machining away using various solvents. For precise high purity work.
Color: Amber
Softening: 160°F (71°C)
Flow point: 250°F (121°C)
Viscosity: 6,000 cps
Research Products International Corp Vacuum Pump Oil, 1 Gallon
For use with High Capacity Vacuum Pump.
Electron Microscopy Sciences Thermally Conductive Adhesive ETC Bond 860 25 GR
Thermally conductive adhesive, Aluminum nitride filled, 1:1 epoxy paste, Excellent mechanical & thermal properties to 400 deg F.
Electron Microscopy Sciences Z-6040 Primer 100 ML
This unique primer affords you a better adhesion between your resin and specimen that you are embedding and prevents the sample from pulling away from the resin during sectioning.
