pH Paper and other Test Strips
Single-use test materials used to rapidly and semi-qualitatively determine the acidity or alkalinity of liquids or to measure another parameter or substance; may include tests for starch, chlorine, and molybdenum; usually via the use of color-based reactions.
pH Papers, pH strips, pH sticks, and pH test kits are used in laboratory, industrial, and educational environments to qualitatively assess pH levels or monitor acid-base titrations in a range of sample types.pH Buffer reference standards are used for the accurate calibration of pH meters and monitors for far more precise and quantitative pH measurement.
pH Test papers are supplied either as rolls, tear-off strips, or sticks. They are impregnated with indicator dyes that change color at a specific pH. In some products, indicator dyes are covalently linked to cellulose fibers to avoid bleed-out (leaching) and contamination of the test sample.
Some pH papers indicate simple acid or base conditions with a single red-to-blue color change (also called litmus papers). Universal pH papers and strips contain a combination of indicators that cover a range of pH values up to and including 0 to 14 in a single test. The observed color change is checked against a comparison chart supplied with the papers.
Alternatively, for metered assessments of pH, standard or reference pH buffers are used to calibrate pH meters and other electrochemical sensors.
Standard Buffer Characteristics:
• Typically supplied at fixed values of pH 4.01, pH 7.00, and pH 10.01
• May be color-coded for easy and quick identification
• Certified to their nominal pH and accuracy at a specified temperature (typically 20°C)
• Supplied as ready-to-use solutions or concentrates
• Contain antifungals for extended shelf life
Electron Microscopy Sciences pH Indicator Papers - Test Papers, 4.5 -10, 100/bx
The indicator dyes of pH-Fix sticks are substantially bound to the cellulose fibers and as a result the possibility of the color bleeding, even in strongly basic solutions, is avoided. The dyes provide a sharp differentiation between the individual pH values and a clear and easy comparison to the color scale. Measurement of pH value is possible even in unbuffered or very weakly buffered solutions, since the sticks can be left in the solution until the final color change is completed. Test samples are not contaminated by the indicator dyes.
Gradations: 0.5
ASI STANDARDS Chlorine in Water Check Standard - Ultra Low Concentration, 5.00 mg/kg - 100 mL
Chlorine in Water manufactured and certified gravimetrically under the guidance of an ISO 9001 quality management system. When applicable, standards are traceable to NIST certified reference materials.ISO 17034 Certified Reference Material
Sigma Aldrich Fine Chemicals Biosciences Nylon Net filter 10.0 um p
Nylon filters are compatible with a broad range of solvents. Two types are available 1) Nylon Membrane filters with pore sizes ranging from 0.20 to 1.2 181m and 2) Woven Net filters with mesh openings ranging from 5 to 180 181m. Our 5 181m Nylon Woven Net filter (NY054700) is commonly used in the automotive industry for cleanliness analysis. features Benefits.Wide range of pore sizes available .Resistant to aggressive solvents ApplicationsParticle Removal and Clarification Solvent filtration Particle Analysis Paint Monitoring Automotive Cleanliness Analysis
Abcam DNA Binding Microplate Solution, 30ML
ab156917 DNA high Binding solution provides a highly efficient method for binding DNA on the microplate surface.
The product is subject to the following: Abcam Restricted Use Statement
Abcam HRP Stability Conjugate Reagent, 50ML
Abcam's HRP Stability Conjugate Reagent (ab171537) was developed specifically for Horseradish Peroxidase (HRP) conjugates in solution.
The product is subject to the following: Abcam Restricted Use Statement
CTL Scientific Supply Corp PH INDICATOR STRIPS 7.0-14.0
pH-Fix indicator strips pH 7.0-14.0 (non-bleeding strips) 100 strips/pack
Sigma Aldrich Fine Chemicals Biosciences ExpandTM Long Range dNTPac
The Expand Long Range dNTPack is the second-generation version of the Expand Long Template PCR System optimized and designed to consistently amplify PCR products from 5kb up to 25kb from genomic DNA (or up to 40kb from lambda DNA templates). The supplied buffer can be used for all PCR product sizes. In addition a buffer without MgCl2 and separate vials of MgCl2 and DMSO are included if optimization is needed. Expand Long Range dNTPack contains a special enzyme mix that consists of thermostable Taq DNA Polymerase and a thermostable DNA polymerase with proofreading activity. This powerful polymerase mixture produces a high yield of PCR product. Due to the inherent 3-5 exonuclease activity of the proofreading polymerase Expand Long Range dNTPack copies DNA three times more accurately than Taq DNA Polymerase.
CTL Scientific Supply Corp QUANTOFIX POTASSIUM WITH REAGE
Test sticks and reagents for the semi-quantitative determination of potassium (K + ) in solutions
Gradation of scale: 0-200-400-700-1000-1500 mg/l 100 strips/box + reagents
CTL Scientific Supply Corp QUANTOFIX NITRITE 3000
Test sticks for the semi-quantitative determination of high concentrations of nitrite (NO 2 ) in solutions
Gradation of scale: 0-0.1-0.3-0.6-1-2-3 g/l 200 strips/box
CTL Scientific Supply Corp QUANTOFIX ZINC
Test strips used for the semi-quantitative determination of zinc in solutions. Gradation of scale: 0-2-5-10-25-30-100 ppm Zn2+ - 100 strips/pack plus reagents.
Electron Microscopy Sciences Pehanon pH Indicator Strips 1.0-12.0, 1.0 gradations
pH indicator papers where the indicator and color scale are combined on a single strip. They permit a fast, convenient, and accurate pH determination since it is not necessity to compare color against a scale. This presentation also permits the pH measurement of colored solutions and suspensions, since the color of the test solution acts on the comparison scale in the same manner as on the indicator field.
The indicator zone (unprinted field) is in the center of the strip, the comparison fields above and below same. The strip is submerged in the solution for three seconds so that all colors zone are wetted and the center field changes color according to the pH value of the solution. It is then compared to the color filed bearing the corresponding pH value imprint. An invisible hydrophobic barrier just above the top color field prevents capillary action of the test solution.
pH: 1.0-12.0
Gradations: 1.0
Fisher Chemical™ Universal pH Indicator System
For pH determinations between 4.0 to 10.0