pH, ORP, and Titration, Combination Electrodes
Cole-Parmer Tuff-Tip pH Electrode; 100 Ohm PT RTD (Tinned Ends), BNC, 3/4"
Don't worry about bulb breakage, the unique Tuff-Tip design helps protect bulbs. Choose chemical-resistant Ryton PPS standard electrode or with graphite tip. Eliminate electrical noise with graphite-tipped models. Ideal for viscous or severe applications, these electrodes reduce contamination and clogging with uniform pore size.
Cole-Parmer pH electrode, Refillable, low maintenance
This electrode gives a faster response and increased stability across a pH range of 0 to 14. A dome bulb offers better protection from breakage. It has stability in low-ionic strength solutions and offers resistance to Na+ ion interference. It is compatible with most brands of pH meters that accept standard BNC connections.
Cole-Parmer General Purpose pH Electrode, 100 Ohms Pt RTD, 10-ft Cable
General-purpose single-junction electrodes are economical yet accurate. Can be used for measurements up to pH 13. Maximum pressure is 150 psi at 25°>C.
Oakton by Cole-Parmer Self-Cleaning Flat Surface ORP Probe, DJ/CPVC/Pt/10'/BNC
Use these unique double-junction electrodes in your most difficult ORP applications. Flat surface does not collect suspended solids--fluid flow across the electrode provides a cleaning action that extends electrode life and improves performance. Annular junction reduces reference cell fouling. Choose either a CPVC housing (max temp 80°>C) or chemical resistant Ryton housing (max temp 100°>C). Both types have 10-ft cables and can be used at pressures up to 100 psi. BNC connectors match a variety of meters and controllers. Install electrodes in tee fittings--3/4'' NPT(M) thread and 2'' insertion depth.
Cole-Parmer Tuff-Tip pH Electrode, 3/4" 100 Ohm RTD
Don't worry about bulb breakage because the unique Tuff-Tip design helps to protect bulbs. There are chemical-resistant Ryton PPS standard electrodes or ones with graphite tips, which eliminate electrical noise. They are ideal for viscous or severe applications and reduce contamination and clogging with uniform pore size.
Cole-Parmer pH Electrode for Ultrapure Water
Electrode has 10-ft long cable with BNC pH connector and tinned end for solution ground.
Cole-Parmer Oakton Single-junction, semi-dome, polygel reference, temperature sensor w/ waterproof connection (Anthony) pH electrode, 100C, 12 mm x 115mm,30K ATC.
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.
Cole-Parmer Oakton ORP Electrode, Epoxy, Single-Junction; 10 ft cable
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.
Cole-Parmer Oakton Ion Selective Electrode (ISE), Single-Junction, Epoxy; Chloride
A wide variety of ion selective electrodes are availabe to suit a wide array of applications. Select from four electrode types: membrane, solid-state, gas sensing, and glass bulb; typical response time is 20 to 30 seconds. Epoxy-body ISEs are either single- or double-junction, and the glass-body type is double junction.
Cole-Parmer Oakton Replacement Electrode Holder Attachment for Use with Portable Meters
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample. For your convenience, cables, power adapters, and other accessories are available for your Oakton meters and pocket testers.
![Biolegend Purified anti-ZO-3 [W22143C]; Isotype: Rat IgG2a, κ; Reactivity: Human; Apps: WB, IHC-P, ICC; Size: 100 μg](https://assets.fishersci.com/TFS-Assets/CCG/product-images/default.jpg-250.jpg)
Biolegend Purified anti-ZO-3 [W22143C]; Isotype: Rat IgG2a, κ; Reactivity: Human; Apps: WB, IHC-P, ICC; Size: 100 μg
Purified anti-ZO-3 [W22143C]; Isotype: Rat IgG2a, κ; Reactivity: Human; Apps: WB, IHC-P, ICC; Size: 100 μg
Hach Company Intellical™ MTC101 Field Low Maintenance Gel Filled ORP/RedOx Electrode, 30 m Cable
Intellical™ MTC101 is a digital combination oxidation reduction potential (ORP/RedOx) electrode with built-in temperature sensor. MTC101 has low maintenance needs thanks to a non-refillable gel-filled single open reference junction. This Rugged MTC101 version is built with a stainless steel body ensuring sufficient weight to the probe for an easy outside handling, the Metal Platinum sensing part is protected by a shroud, and the connection is ensured by strong and visible yellow coloured cable onto which you can clip depth markers (optional accessories), making the MTC101 rugged models specially designed for field use. MTC101 Rugged is available with a 5, 10, 15, or 30 meters cable. The MTC101 Rugged is ideal for measuring ORP/RedOx absolute mV values in all types of external environment such as river, surface and ground waters, ponds, lakes, sea, wastewater plant, source water, drinking water reservoir for water quality, environmental and treatment process purposes.
Hach Company Intellical™ PHC281 Water Quality Laboratory Refillable pH Electrode, 1 m Cable
Intellical™ PHC281 is a digital combination pH electrode with built-in temperature sensor. The PHC281 is a pH refillable probe made for difficult samples. This laboratory pH electrode is shockproof with its Zeonor plastic body protecting down to the glass bulb sensing element. The electrode is available with a 3 or 1 m cable. The PHC281 refillable pH electrode has a high electrolyte flow rate and a large open junction ideal for difficult samples, such as Low Ionic Strength (LIS), Ultrapure, dirty samples and samples with high solids content. The PHC281 is not suitable for use with organic solvents. A 59-mL bottle of 2.44 M KCl Electrode Filling Solution is included with the probe.