Conductivity Electrodes
Hach Company Probe Cable Depth Markers for Rugged IntelliCAL Probes
Taking readings at specific depths with rugged outdoor electrodes is a snap with these depth markers. Visually identify the depth of your electrode by attaching depth marker securely on cable at points to meet your needs. Five markers per package.Note: For use with rugged outdoor electrodes only.
Electron Microscopy Sciences Z-Axis Electrically Conductive Tape 9703, 1/2" wide 36 YD
3M Electrically Conductive Adhesive Transfer Tape 9703 is a pressure sensitive adhesive (PSA) transfer tape with anisotropic electrical conductivity. The PSA matrix is filled with conductive particles which allow interconnection between substrates through the adhesive thickness (the "Z-axis") but are spaced far enough apart for the product to be electrically insulating in the plane of the adhesive. The PSA tack properties and lack of any thermal curing make tape 9703 easy to use in all applications requiring a conductive tape.
Width: ½"
Pendotech 1/2 Inch Hose Barb Single Use Conductivity Sensor
Single Use Conductivity Sensor, non-sterile, polysulfone 1/2 inch hose barb
TA Instruments Stainless Steel, Composite HB, 8 mm, NST, Upper Plate with Composite Heat Break, for Use with Lower Peltier Plate, Smart Swap 2 Geometry, HR x0 Instruments Only
Waters TA Instruments HR X0, Stainless Steel, Composite HB, 8 mm, NST is an upper plate with composite heat break for use with the lower Peltier plate. It has Smart Swap 2 geometry and is for use with HR X0 instruments only.
Cole-Parmer Conductivity Cell, K=1.0, Epoxy, Dip-Style, 100 Ohm Pt RTD ATC
Cells withstand pressures up to 150 psi (at 135C for SS; 25C for CPVC and PVDF).
Azzota Corp Cond Electrode K 0.1 Pt glass
CON-0 1 Conductivity Electrode Platinum conductivity electrode suitable for general applications range 0 to 100 S/cm Platinum cell conductivity electrode For measuring the pure water or low conductivity liquids Cell constant (K) 0 1 6 holes connector
Cole-Parmer Conductivity Cell, K=1.0, 10 KOhm ATC, Glass; Type F
These 10-foot cables with stripped ends are economical replacements for a variety of controllers. There are flow-through, in-line, swage, and dip styles available.
HORIBA INSTRUMENTS INCORPORATED MODEL 3552-10D CONDCTVY SBMRSB
NC2320571 MODEL 3552-10D CONDCTVY SBMRSB