Thermometer Accessories
SP Bel-Art™ H-B DURAC Thermocouple Thermometer Probes
H-B DURAC Thermocouple Thermometer Probe
Cole-Parmer™ Thermocouple General-Purpose Surface Probe
The Thermocouple General-Purpose Surface Probe is designed to measure the temperature at the surface without penetrating the material.
Cole-Parmer™ Digi-Sense™ Optional Tri-Pod Stand for Meters
Get the most out of your thermocouple meter with these accessories.
Digi-Sense™ Replacement Rubber Boot with Built-In Stand for Thermocouple Acorn Meter
Get the most out of your Acorn Meter with this replacement rubber boot with built-in stand
YSI™ 3220 Temperature Probe for 3200 Conductivity Instruments
Use with conductivity cells that lack a built-in temperature sensor on YSI 3200 Conductivity instruments
Accessories for the 20250-40 Digi-Sense™ Temperature Humidity Touch-screen Recorder
The touch-screen reader has 8GB on board memory to provide virtually unlimited data logging capacity
Cole-Parmer™ Thermocouple General-Purpose Probe with Miniconnector
Thermocouple General-Purpose Probe with Miniconnector is designed for use with liquids, gases and semisolids.
Hillrom Wall Holder for SureTemp™ Thermometer
Wall Holder for SureTemp™ Plus 690 and 692 Electronic Thermometers.
Bel-Art™ Thermometer Holder
Easy-to-use, polypropylene clips hold thermometers and probes from 3.2 to 11 mm in diameter securely in place
United Scientific™ Probe Thermometer
Temperatures on this Probe Thermometer are shown on a dial display.
Chemglass Life Sciences Thermometer, Non-Mercury, 10/30 Joint, 76mm Immersion, -10°C to 250°C
Thermometer, Non-Mercury, 10/30 Joint, 76mm Immersion, -10¿C to 250¿C. Thermometer is mineral spirit filled to eliminate workplace and environmental hazards associated with mercury. Thermometer has a white back, a 6 to 7mm outer diameter, and a standard taper 10/30 inner ground joint. All ranges have 1¿ subdivisions. Immersion is measured from the bottom of the joint to the bottom of the mercury bulb.
Thermco Products Inc 60ml PETG plastic bottle w/Biosafe Liquid & Magnets
60ml bottle with insulating liquid for liquid-in-glass thermometer and/or temperature probes to monitor temperatures in freezers, refrigerators, incubators, oven and other laboratory instruments. Bottle is filled with bio-safe glycol and has dual magnets to install on doors or wall of the instrument saving space
Polyscience Thermometer Holder
PolyScience™ Thermometer HolderFor use with:• PolyScience Circulating Baths • PolyScience Stainless Steel Open Bath Systems • PolyScience Polycarbonate Open Bath Systems • PolyScience Specialty Products • PolyScience Cryoprecipitate Bath
Thermco Products Inc LRG TRIP DISPLAY MIN/MAX THERM
Triple Display Digital Thermometer simultaneously shows the current, minimum, and maximum temperatures and updates continuously. An audible alarm will sound when the temperature rises above or goes below the set temperatures. The minimum/maximum feature monitors critical temperature for any period of time, such as overnight or weekend. Reset buttons on front panel. Each thermometer is serialized and traceable to NIST.The thermometer probe is housed in an unbreakable plastic bottle or vial filled with a Bio-Safe Glycol / Water or Sand buffering media which maintains the thermometer reading when the instrument door is opened. The thermometer and the bottle housing the probe have dual magnets allowing attachment to doors or walls of the instrument. Other features include a flip-open stand, wall mounting key hole, and supplied with a AAA alkaline battery. The instrument is �C and �F switchable.