Electrophoresis Gel Casting Reagents
Biotang Inc BioAcryl-P (40%); Bis-Acrylamide 29:1, 1000 ml
BioAcryl-P (40%); Bis-Acrylamide 29:1, 1000 ml.
Apexbio Technology LLC Phos binding reagent acrylamide,5mg Cas No: NA MFCD: NA
Phos binding reagents are specific and selective phosphate-binding reagents, and exhibit preferential ionic interactions with phosphorylated ions on phosphorylated proteins or peptides at neutral pH. Phos binding reagent is a dinuclear metal (Zn2+ or Mg2+) complex. Phos binding reagent acrylamide (PBR-A) is a specific reagent for separation of phosphorylated proteins using SDS-PAGE method. There are other sizes available. Please inqury us for quote.
Med Vet International McKesson Absorbent Gelling Fiber Dressing, 3/4 x 18 Inch, 87180, 50/Case
Absorbent Gelling Fiber Dressing McKesson Carboxymethyl Cellulose (CMC) 3/4 X 18 Inch Highly absorbent Excellent wet and dry strength Supports moist wound environment for faster healing and low risk of maceration 3/4 x 18 inches
Gold Biotechnology Inc Low Melt Agarose 25 g
Low Melting (LM) Agarose is a low melting temperature agarose with the highest resolving capacity for large DNAfragments, including PCR products.
National Diagnostics ACRYLAGEL 1 LT
AcrylaGel, Ready-to-use, 30% acrylamide solution in distilled/deionized water. 18 megOhm water. 0.2 micron filtration, 1 LT
Biotang Inc Agarose LE (Low Electroendosmosis), BiotechGrade, 500gx5
Agarose LE (Low Electroendosmosis), BiotechGrade, 500gx5
Research Products International Corp Agarose, for Routine Gel Electrophoresis, Molecular Biology Grade, High Gel Strength, 100 Grams
Molecular Biology Grade Agarose. High Purity for preparative and analytical electrophoresis of nucleic acids ≥1000bp. Forms a solid gel at low concentration. Product is RNase/DNase free.
Gel Strength, 1%: ≥1200 g/cm2
Gel Strength, 1.5%: ≥2700 g/cm2
Gel Point: 35-37°C
Melting Point: 87-89°C
EEO: 0.09-0.12
Sulfate: ≥0.03%
Loss on Drying: <10%
DNA Binding: None Detected
National Diagnostics PROTOGEL QUICK-CAST 12% 100 ML
ProtoGel Quick-Cast 12%, Ready-to-use gel solution for SDS-PAGE that combines the convenience of pre-cast gels with the economy of casting your own, 100 ML
Apexbio Technology LLC HyperChrom Heparin FF Agarose 100ml
HyperChrom Heparin FF Agarose is an affinity chromatography resin composed of heparin covalently immobilized onto a cross-linked agarose support Heparin a naturally occurring glycosaminoglycan acts as an affinity ligand based on its specific interactions with various biomolecules including coagulation factors antithrombin III growth factors interferons lipoprotein lipases nucleic acid-binding proteins and steroid receptors This resin is employed extensively in biomedical research for the purification and isolation of these biological entities
Crescent Chemical Co Inc ACRYLAMIDE/BIS SOLUTION
Acrylamide/Bis Solution, 37.5:1 (40 % w/v), 2.6 % C Solution of acrylamide and N,N'-methylene bisacrylamide (Bis) in deionized water. Convenient to use, reduced risk of neurotoxic acrylamide dust in the air. Applicable to all electrophoresis techniques. Size - 1L Storag
Biotium GelRed Agarose LE
GelRed Agarose LE is our ultra-pure molecular biology grade LE agarose pre-coated with GelRed Nucleic Acid Gel Stain. With GelRed Agarose, there is no need to handle concentrated fluorescent dye while preparing your gel, for greater convenience and safety. GelRed Agarose LE has low electroendosmosis (EEO) for high electrophoretic mobility. This agarose demonstrates excellent performance for analytical or preparative nucleic acid electrophoresis and blotting. It is suitable for preparing 0.8%-2% gels in TAE or TBE buffer. In a 1% GelRed Agarose gel, the final GelRed concentration is 1X. GelRed Agarose also gives excellent results at percentages between 0.8% (0.8X GelRed) up to 2% (2X GelRed). GelRed and EtBr have virtually the same spectra, so you can directly replace EtBr with GelRed without changing your existing imaging system. Gel staining with GelRed is compatible with downstream applications such as sequencing and cloning.
National Diagnostics AccuGel 29:1 (30%), 450mL
AccuGel 29:1 is a stabilized, ready-to-use solution of 30% (w/v) acrylamide : bisacrylamide(29:1). AccuGel 29:1 has zero acrylic acid content, eliminating the fixed charges that cause band streaking. Additionally, oxidation products such as aldehydes have been removed by a selective adsorption process. With AccuGel 29:1, you can trust that your results will be consistent from one electrophoretic run to the next. It is certified RNase and DNase Free.
IBI SCIENTIFIC 3P ACRYLAMIDE SOLN 30 29/1 - 1L
30% Acrylamide/ bis-acrylamide solutions: IBI Scientific 30% acrylamide/ bis-acrylamide solutions can be purchased in 19:1, 29:1 and 37.5:1 configurations. These products are manufactured here at IBI Scientific using Type 1 reagent grade water produced from our state-of-the-art water purification system. Quality Control testing is also completed here at IBI Scientific as these solutions are certified as nuclease and protease free. • Premixed acrylamide/bis-acrylamide solution for pouring polyacrylamide gels used in sequencing and protein electrophoresis• IBI Scientific 30% Acrylamide/ bis-acrylamide solutions produce clear gels that result in clear and concise results• Available in 1 liter size• Manufactured regularly to maintain freshness and shelf life• Ready-to-use solution for preparing polyacrylamide gels for sequencing and protein electrophoresis• Ideal for use as a 4% stacking gel or a 10% resolving gel in SDS PAGE applicaĉĉĉĉĉĉĉĉĉĉINSTA-PAGE ACRYLAMIDE 30% SOLUTION 29:1ĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉ27-Nov-24 08:14:54:000 AMĉ