Animal Care and Research
Braintree Scientific Male Luer Spring Tether,12"" w/catheter to fit 25g swivel
Male Spring Tether For researchers that wish to use a standard swivel or stainless steel swivel with the Quick Connect™ Harness simply use a tether extension line with intergraded male end. Individually packaged and ETO exposed. **Sold for research purposes only and not for human use**
Braintree Scientific Male Luer Spring Tether,18"" w/catheter to fit 22g swivel
Male Spring Tether For researchers that wish to use a standard swivel or stainless steel swivel with the Quick Connect™ Harness simply use a tether extension line with intergraded male end. Individually packaged and ETO exposed. **Sold for research purposes only and not for human use**
Braintree Scientific Blunt Tip Needle non-sterile,26ga-1/2"""" w/standard hub 100/p
Stainless steel, blunt tip, hypodermic needle with standard luer hub. For use as an interface to connect a hypodermic syringe directly to catheter port for intravascular substance administration, blood sampling and catheter flushing. **Sold for research purposes only and not for human use**
Braintree Scientific Quick Connect Male/Male Spring Tether, 14""
Spring Tether Stainless Steel spring tethers for single luer or standard swivel applications. **Sold for research purposes only and not for human use**
Tube sets for Instech P720 peristaltic pumps, dual channel, .062in ID silicone with .062in ID barb inlet and outlet (mates with 062 tubing). Package of 5, nonsterile. Warning: will place additional stress on motor and shorten life of the pump.
The Instech P720/TS‑DBS062SDBS is a dual‑channel tube set for P720 peristaltic pumps, built with .062in ID silicone tubing and dual .062in barb connectors on each end for parallel high‑flow delivery. Supplied non‑sterile in packs of five, these tube sets support smooth, balanced two‑channel fluid transfer for infusion, perfusion, and other research applications.
Features
- Two‑channel silicone tube set for P720 pumps
- .062in ID tubing for higher low‑flow and mid‑flow ranges
- Dual .062in barb inlet and outlet connectors
- Packaged non‑sterile in sets of five
- Compatible with all P720 two‑channel configurations
Med Vet International Locking Screw 2.7mm x 6mm Star/Torque, J1133TA, Each
Locking Screw 2.7mm x 6mm Star/Torque, J1133TA, Each
Med Vet International Dynarex Endotracheal Tubes w/ Stylette - Cuffed, 9.0 mm, 10/Box
Dynarex Resp-O2™ Endotracheal Tubes are designed from premium plastic materials to efficiently deliver oxygen at higher concentrations. They may also be used to administer medications directly into the lungs. These Endotracheal Tubes are contoured for improved ease of administration and feature smoothly formed Murphy eye holes for improved comfort. Dynarex Endotracheal Tubes are available cuffed or uncuffed, and with or without an intubating stylette to help support the tube and guide it through the patient’s airway. Dynarex Resp-O2™ Endotracheal Tubes are high-quality plastic tubes designed to safely and effectively deliver higher concentrations of oxygen and medications directly into patients’ lungs.
Braintree Scientific MICROVETTE CB 300 W/SERUMUM
Microvette CB 300; Capillary collection and sample container in one unit. The Microvette CB 300 capillary tube, along with its attached push cap, is supplied complete with a carrier tube that is also suited for transport and centrifugation. **Sold for research purposes only and not for human use**
Med Vet International Cortical Screws, J0419P, 2.7mm x 36mm, 6 Count
2.7mm Cortical Screw. Use with 2.7mm compression and 2.7mm reconstruction plates to obtain compression at a fracture site.
Med Vet International 2.4mm x 36mm Titanium Cortical Self-Tapping Screws, J1073NT, 6-Pack
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.
Braintree Scientific Single Temp Controller, 38 degrees C, use with Cat#: GETP
Single Temp Power Supply - Provides a single constant plate temp. Use with Cat#: GETP, NOTE: Final plate temp is dependent on room temp. Choose from 30C, 34C, or 38C **Sold for research purposes only and not for human use**
Braintree Scientific Dyets Powder Feeder Jar Snap on Lid (Lid only)
Dyets Powder feeding jar Snap on Lid. 100% stainless steel top for easy cleaning and durability. Complete set can be found under NC0496158. **Sold for research purposes only and not for human use**
Braintree Scientific Low Pressure Regulator with Flowmeter (0.5-12 LPM)
Low Pressure Regulator with Flowmeter0.5-12 lpm AVMA compliant this regulator includes a six foot hose with quick-disconnect fitting that attaches to the stainless steel lids. **Sold for research purposes only and not for human use**
Braintree Scientific Stainless Steel Spinal Cord Matrice, Mouse1mm Coronal & Sag
Stainless Steel Spinal Cord Matrice **Sold for research purposes only and not for human use**