Animal Surgical Equipment Accessories
Med Vet International Zoetis, Vaccine, Fluvac innovator, 10Ds
Equine Influenza Vaccine, Killed Virus Shipping charges for refrigerated items are a flat charge based on your location or zone. Cold items are packed on ice and shipped separately in a cooler with expedited shipping. Med-Vet can only ship cold items Monday-Wednesday. *Next Day Air Available With Additional Charges*
Instech Rat tail vein cannula, 25ga, 6cm PE/PVC tube, PinPort and injector
The Instech C15SS-RTV1453P is a rat tail vein cannula featuring a sharp 25ga stainless steel introducer paired with a 6cm (2.4in) PE/PVC extension tube for controlled venous access during dosing or sampling. Its integrated white 25ga PinPort connector enables a closed, low-dead-volume workflow, and each set includes a PNP3M injector and needle guard for safe, ready-to-use operation. Individually EtO sterilized, it provides dependable performance for precise rat tail vein procedures.
Features
- 25ga stainless steel introducer (0.25x0.51mm)
- 6cm (2.4in) PE/PVC tubing (0.4x1.3mm)
- Integrated 25ga white PinPort connector
- Includes PNP3M injector and needle guard
- Sharp tip for clean tail vein entry
- Individually packaged and EtO sterilized
Instech Polyurethane tubing, medical grade, 32GA/0.8Fr. .005x.010in (0.13x0.25mm). 10m (33ft) spool, non-sterile.
The Instech BTPU‑010 is a 32ga polyurethane intravascular tubing with a .005x.010in (0.13x0.25mm) profile, providing a flexible and biocompatible micro‑bore flow path suitable for mouse, intrathecal, or other ultra‑small catheter applications. Supplied non‑sterile on a 10m (33ft) spool, it offers excellent friction‑fit performance on micro‑connectors and is commonly used for custom catheter fabrication in research settings.
Features
- Polyurethane intravascular tubing for micro‑catheter applications
- .005x.010in (0.13x0.25mm) dimensions; approx. 32ga / 0.8Fr size
- 10m (33ft) non‑sterile spool
- Good biocompatibility for implantation
- Stretchy material for secure friction‑fit connections
- Ideal for microscale infusion and catheter fabrication
Med Vet International Locking Screw 2.7mm x 8mm, J1133TB, Each
Locking Screw 2.7mm x 8mm, J1133TB, Each
Med Vet International Locking Screw 3.5mm x 50mm, J0438LTW, Each
Locking Screw 3.5mm x 50mm, J0438LTW, Each
Med Vet International Rodent Cheek Dilator, Large with Long Reach, J0051RDLX, Each
The cheek dilator allows visualization of molars and protects cheeks from instruments.
Med Vet International Type-1 Half Pin, J0371PB, 1/8" x 4 1/2", Each
Basic kit to provide components enough for any type I frame in small and medium size. Ideal for beginning entry into external fixation.
Med Vet International Type-1 Half Pin, J0371PA, 3/32" x 4", Each
Basic kit to provide components enough for any type I frame in small and medium size. Ideal for beginning entry into external fixation.
Med Vet International Locking Screw 3.5mm x 42mm, J0438LS
A construct using locking plates and screws acts as an internal/external fixator. The construct is stiffer than conventional plates and screws and will require less contouring as it is not essential that the plate contacts the bone. Locking plates and screws are particularly popular in TPLO where significant savings in time (and morbidity) can be made. Also useful in fracture work in situations where contouring and rigidity is a challenge. The head of Jorvet locking screws engages the plate in the standard format using a twin start fine thread. Jorvet screws are an exact fit for standard locking plates but utilize the conventional hex screwdriver rather than a star screwdriver.Locking screws are available in both 2.7 and 3.5 screw diameters. Each size requires its own dedicated drill guide. Jorvet locking plates have ‘stacked’ locking holes which allow more screws per bone fragment compared with dual hole type plates.Locking Screws 3.5mm42mm
Med Vet International Suture Anchor Pin 2.5mm w/ .7mm Hole, J0836X
A threaded suture anchor is machined into the tip of a trochar pin. Immediately proximal to the suture anchor is a narrow break off point. The construct is stable during axial drilling of the pin into bone. Once in position with the hole of the anchor just above the surface of the bone, the shaft of the pin is rocked to and fro. The stainless steel undergoes work hardening and become very brittle, ultimately break- ing off leaving the anchor in position ready for placement of sutures. The suture anchor pin is extremely easy to position and place without pre-drilling.Suture Anchor Pin 2.5mm diameter x 0.7mm hole
Instech Co-extruded PE/PVC external infusion tubing. Polyethylene flow path for biocompatibility; PVC outside to minimize kinking. .017x.051in; fits 25ga. Clear. 30m (98ft) spool. Non sterile.
The Instech BTCOEX‑25 is a co‑extruded PE/PVC external infusion tubing featuring a polyethylene inner layer for excellent compound compatibility and a PVC outer layer to minimize kinking and evaporation. Sized at .017x.051in (0.4x1.3mm) to fit 25ga connectors, this clear tubing provides a reliable friction‑fit interface for external infusion lines. It is supplied non‑sterile on a 30m (98ft) spool for use in laboratory research applications.
Features
- Co‑extruded PE/PVC external infusion tubing
- PE inner layer for biocompatible flow path
- PVC outer layer for kink resistance
- .017x.051in (0.4x1.3mm) dimensions; fits 25ga
- Clear tubing on a 30m (98ft) non‑sterile spool
- Designed for external infusion use only
Med Vet International Ophthalmic Implant 60mm, J1244R, Each
Clients value their pets' appearance, shouldn't their veterinarian? The surgical enucleation of a pet's eye is a disheartening procedure. The pet owner is often more traumatized than the pet itself. Part of the surpeon's responsibility is creating the best possible post operative appearance. The most common type of procedure is the transpalpebral approach. This technique requires the placement of an orbital implant to look cosmetically pleasing. With no implant, there will be a marked indentation as the potentially vacant space contracts. The Ophthalmic Implants are: - Simple to use by any surgeon - Quality silicone from Dow Corning - Lightweight and easily sterilized by autoclaving - Inexpensive implant cost - Black glossy color - Multitude of sizes - Manufactured in the U.S.A. at an FDA inspected facility Sizing guideline: measure the distance across the cornea then subtract 2mm. 60mm
Med Vet International Locking Screw, 2.7mm x 10mm, J1133C
Locking Screws and Plates. A construct using locking plates and screws acts as an internal/external fixator. The construct is stiffer than conventional plates and screws and will require less contouring as it is not essential that the plate contacts the bone. Locking plates and screws are particularly popular in TPLO where significant savings in time (and morbidity) can be made. Also useful in fracture work in situations where contouring and rigidity is a challenge. The head of Jorvet locking screws engages the plate in the standard format using a twin start fine thread. Jorvet screws are an exact fit for standard locking plates but utilize the conventional hex screwdriver rather than a star screwdriver.Locking screws are available in both 2.7 and 3.5 screw diameters. Each size requires its own dedicated drill guide. Jorvet locking plates have ‘stacked’ locking holes which allow more screws per bone fragment compared with dual hole type plates.Locking Plates 2.7mm 10mm
Med Vet International Locking Screw 3.5mm x 22mm Star/Torx, J0438LTF, Each
Locking Screw 3.5mm x 22mm Star/Torx, J0438LTF, Each