Gas Detection Bags
MilliporeSigma™ Supelco™ Tedlar™ SCV Gas Sampling Bag with Thermogreen™ LB-2 Septa
Tedlar™ is recommended in several US EPA methods for sampling VOCs and sulfur compounds.
MilliporeSigma™ Supelco™ Tedlar™ PLV Gas Sampling Bag with Thermogreen™ LB-2 Septa
Tedlar™ is recommended in several US EPA methods for sampling VOCs and sulfur compounds.
MilliporeSigma™ Supelco™ Supel™-Inert Multi-Layer Foil Gas Sampling Bag
Ideal for sampling low molecular weight compounds such as carbon monoxide (CO), carbon dioxide (CO2) and permanent gases
Restek™ Tedlar Sampling Bags
Lightweight and easy to use sampling bags with polypropylene or stainless-steel valves.
Supel™-Inert Multi-Layer Foil Gas Sampling Bags, Sold by MilliporeSigma™ Supelco™
Ideal for sampling low molecular weight compounds. Two outer layers of aluminum film provide a great barrier to gases permeating through the walls of the bag.
MilliporeSigma™ Supelco™ Tedlar™ Gas Sampling Bag for EPA TCLP Method
Tedlar™ is recommended in several US EPA methods for sampling VOCs and sulfur compounds.
SKC Inc Tedlar Sample Bags, 10 Liters, Dual Stainless Steel Fittings, 10/pk
Tedlar 10-liter Sample Bag with dual stainless steel fittings: the hose/valve for flushing, filling, and sealing the bag, and the septum with a syringe port for removing samples for analysis, pk/10. DOES NOT ship to Alaska, Arizona, California, Colorado, Hawaii, Idaho, Nevada, Oregon, Utah, Washington. Wyoming”
Cole-Parmer ESS GD0707-7000 Sampling Bags With Combination Valve, 1L
Gas sampling bags are constructed of 2-mil thick Tedlar with solid seam to keep gases contained. Unique, polypropylene combination valve features 3/16" OD on/off stem suitable for tubing connections and integral PTFE silicone septum for syringe sampling. Low permeability. Select from a variety of sizes to suit your needs. Case of 10.
Accuflow Systems Saint-Gobain Gas Sampling Bag, FEP, 6 x 10 in
Saint-Gobain Chemware FEP gas sampling bag for collection, transport, and short-term storage of gaseous samples. Constructed from chemically inert FEP film and heat-sealed on all sides to minimize permeability and maintain sample integrity. Typical applications include air quality monitoring, stack gas sampling, and calibration gas collection.
- Made from 5 mil FEP fluoropolymer film.
- Dimensions 6 x 10 in, capacity 1.2 L.
- Valve options include nickel-plated brass on/off fitting or PTFE/silicone septum.
- Heat-sealed on all four sides for leak-resistant containment.
- Low permeability to limit sample loss during storage and transport.
- Individually packaged; suitable for corrosive or reactive sample matrices.
Alkali Scientific SureSeal™ Sterile Sampling Bag, 27oz, 304mm X 114mm, 500/cs
SureSeal™ Bags are gamma sterilized, leaving a virgin interior surface with no toxic residue from gas exposure. Samples can be easily collected by removing the tear strip above the wire closure and pulling on the two external grip tabs to open the mouth of the bag to the desired level. Using the grip tabs ensures sterility and eliminates the risk of contamination from finger contact. Then, introduce the sample into the bag, flip or fold the bag three times, bend the wires and your sample is secure inside the airtight and moisture sealed bag. SureSeal™ bags are made of virgin polyethylene for excellent clarity and strength. They meet USDA, EPA and FDA standards and are sterile, RNase-free, DNase-free and non-pyrogenic. The PVC tab that surrounds the stainless steel wire is extended beyond the wire ends to eliminate the potential for punctures, scratched hands or ripped gloves due to exposure to uncovered wire ends. 500/pk
Accuflow Systems Saint-Gobain FEP Gas Sampling Bag, 0.5 L, On/Off Valve
Saint-Gobain Chemware FEP gas sampling bags provide an inert, chemically resistant container for collection and transport of gas samples in field and laboratory applications. These bags are constructed from 5 mil FEP film and are supplied as a case pack for routine sampling, calibration, and emissions monitoring tasks.
- Material: FEP fluoropolymer film, 5 mil (125 μm) thickness.
- Capacity: 0.5 L.
- Dimensions: 150 x 150 mm (approximately 6 x 6 in).
- Valve options: nickel-plated brass on/off valve (3/16 in hose barb) or PTFE/silicone septum in polypropylene housing.
- Temperature rating: up to 200°F (93°C).
- Pack quantity: case of 10 bags.
- Typical applications: gas sample analysis, emissions monitoring, instrument calibration.
Accuflow Systems Saint-Gobain Chemware Gas Sampling Bag, FEP, 0.5 L, Septum
Chemware FEP gas sampling bag provides contamination-free collection and temporary storage of gas samples. Constructed from 5 mil FEP fluoropolymer film with heat-sealed edges and a septum fitting for syringe sampling. 0.5 L capacity and 152 x 152 mm (6 x 6 in) footprint make it suitable for air quality monitoring, emissions sampling, and calibration.
- Material: 5 mil FEP fluoropolymer film
- Capacity: 0.5 L (approx. 17 oz)
- Dimensions: 152 x 152 mm (6 x 6 in)
- Fitting: septum for syringe sampling
- Construction: heat-sealed on all sides for leak-resistant operation
- Chemical resistance: inert to most gases and vapors
- Temperature resistance: up to 200°F (93°C)