MilliporeSigma™ Amicon™ Stirred Cell Maintenance Kits (Stir Bar Assembly, 2 Seals, Tubing kit)

Amicon stirred cells concentrate samples rapidly but gently, using magnetic stirring to minimize concentration polarization and shear stress-induced denaturation.

MilliporeSigma™ Amicon™ Stirred Cells

Amicon stirred cells concentrate samples rapidly but gently, using magnetic stirring to minimize concentration polarization and shear stress-induced denaturation.

MilliporeSigma™ RC800 Mini-Reservoir

Accessory for simplified stirred cell operation

MilliporeSigma™ Solvent-resistant Stirred Cells, for 47mm Membranes

Access contents without dismantling via top plate opening. MilliporeSigma™ Solvent-resistant Stirred Cells, For 47mm Membranes is used for protein desalting, purification and concentration. The in-place disc filter is inside a glass cylinder with PTFE components for broad compatibility. Autoclavable.

MilliporeSigma™ Stirred Cells Replacement Parts

Retaining Stand Assembly for Model 8200

MilliporeSigma™ Amicon™ Stirred Cell Seal Kits

Use with solutions up to 10% macrosolute concentration. Amicon™ Stirred Cell Seal Kit includes 3 silicone gaskets and O-rings. The Amicon stirred cell model provides high flow rates and is capable of rapid concentration or salt removal / concentration in the same unit.

Sterlitech Corporation Sterlitech HP4750X 2500 PSI Stirred Cell (HP4750X)

Supplier Diversity Partner
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More

The Sterlitech HP4750X stirred cell is a high-pressure chemical resistant stirred cell that performs a wide variety of membrane separations. 

HP4750X Stirred Cell Product Benefits:

Sterlitech Corporation CF042 Cell Assembly, Crossflow, Acrylic (CF042A)

Supplier Diversity Partner
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More

The Sterlitech CF042 membrane cell is a lab scale cross flow filtration unit designed to provide fast and accurate performance data with minimal amounts of product, expense, and time.

CF042 Membrane Cell Product Availability:

Cross flow cell units available in Delrin, PTFE, Stainless Steel, Hastelloy™, or Acrylic 

1000 psi (69 bar) max operating pressure (PTFE and Acrylic versions are 400 psi)

Active membrane area: 42cm2

Please note: A feed flow pump is required to operate the CF042 cross flow cell unit. We recommend the Hydracell pump by Wanner Engineering, which is a positive displacement, diaphragm pump designed for high pressure, lower flow applications. When ordering, be sure to specify the power requirements for the motor. The minimum power available is 110V, 60 Hz. 220 V and 50 Hz motors are also available. There may be an additional cost if a variable speed drive is required. 

Sterlitech Corporation Sterlitech HP4750 High Pressure Stirred Cell Kit, Includes Regulator, Bleed Valve, High Pressure Hose, Magnetic Stirring Plate, (110V)

Supplier Diversity Partner
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More

Sterlitech HP4750 High Pressure Stirred Cell Kit

Includes:

• Regulator
• Bleed Valve
• High Pressure Hose
• Magnetic Stirring Plate (110V)

Sterlitech Corporation HP4750 Pressure Bleed Valve 2500 psig

Supplier Diversity Partner
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More

Safe Operation: Volatile solutions can be processed safely because the Sterlitech™ HP4750 operates on standard sources of compressed air or inert gases (nitrogen, argon, etc.). This provides the user with a variable, safe and consistent supply of pressure to effect membrane separations.

Sterlitech Corporation CF042 CELL ASSEMBLY, FWD OSMSS

Supplier Diversity Partner
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More

CF042 Cell Assembly, Forward Osmosis, Acetal Copolymer (Delrin) (CF042D-FO)

Sterlitech Corporation HP4750 High Pressure Hose (0.25IDx6ft 0.25MPT)

Supplier Diversity Partner
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More

HP4750 High Pressure Hose, 6ft length. 

Hose includes one ¼” compression to ¼” male NPT adapter, which is used to connect the hose to the inlet of the HP4750 Cell. The other ¼” tube end of the hose is swaged into the Pressure Bleed Valve.

ROW INCORPORATED O-RING, PTFE, 10.77 X 2.62 MM

O-Ring, PTFE, 10.77 X 2.62 MM

ROW INCORPORATED O-RING, PTFE, 113.97 X 2.62 MM

O-Ring, PTFE, 113.97 X 2.62 MM

CYTEK BIOSCIENCES MUSE MITOPOTENTIAL KIT

NC2284191 MUSE MITOPOTENTIAL KIT