Syringeless and Syringe Filters
- (2)
- (8)
- (16)
- (391)
- (9)
- (157)
- (1)
- (556)
- (1)
- (1)
- (18)
- (20)
- (2)
- (8)
- (23)
- (1)
- (26)
- (1)
- (3)
- (5)
- (2)
- (1)
- (3)
- (5)
- (2)
- (30)
- (3)
- (1)
- (1)
- (1)
- (18)
- (4)
- (1)
- (2)
- (11)
- (101)
- (4)
- (34)
- (13)
- (18)
- (9)
- (9)
- (6)
- (8)
- (1)
- (7)
- (45)
- (1)
- (22)
- (9)
- (2)
- (176)
- (122)
- (3)
- (1)
- (145)
- (44)
- (54)
- (138)
- (28)
- (4)
- (2)
- (1)
- (8)
- (2)
- (4)
- (12)
- (11)
- (92)
- (24)
- (833)
- (190)
- (9)
- (788)
- (1)
- (20)
- (1)
- (33)
- (13)
- (2)
- (110)
- (417)
- (1)
Filtered Search Results
Fisherbrand™ Syringe Filters - Sterile
Low hold-up volume helps you to recover virtually all of your sample after filtering
| Type | Syringe Filter |
|---|---|
| Hold up Volume (After Air Purge) | Low |
MilliporeSigma™ Millex™ Syringe Filters, Hydrophilic PTFE, 0.45 μm
Millex™ Hydrophilic PTFE Syringe Filters for removing particulates, reducing signal-to-noise ratios and maintaining flat baselines.
| Pore Size | 0.45 μm |
|---|---|
| Disposable | Single-use |
| Filter Type | Syringe Filter |
| Hydrophobicity | Hydrophilic |
| For Use With (Application) | Analytical sample prep |
| Sterility | Non-sterile |
MilliporeSigma™ Millex™-GP Sterile Syringe Filter Units with PES Membrane, 0.22 μm (Research Use Only)
Ready-to-use, syringe-driven units designed for sterilizing and clarifying sterile solutions.
| Pore Size | 0.22 μm |
|---|---|
| Disposable | Single-use |
| Temperature (English) Operating | 113°F |
| Housing Material | Hydrophilic PES |
| Material (Membrane) | PES |
| Color | Green |
| Volume (Metric) | <10 mL |
| Pressure Rating | 145 psi |
| For Use With (Application) | Sterilization of tissue culture media, protein solutions or aqueous solutions;Low Protein Binding |
| Sterility | Sterile |
| Type | Modified Acrylic Syringe Filter |
| Outlet Style | Male Luer Slip |
| Diameter (Metric) | 3.3 cm |
| Inlet Style | Female Luer Lock |
| Tip Material | Modified Acrylic |
| Temperature Range (English) | 113°F |
| Temperature Range (Metric) | 45°C |
| Temperature (Metric) Operating | 45°C |
| Autoclavable | Not Autoclavable |
| Hold up Volume (After Air Purge) | <100 μL |
Cytiva Whatman™ Puradisc 25mm PTFE Syringe Filters
Contains hydrophobic membrane that is chemically stable and inert. Whatman™ Puradisc 25mm PTFE Syringe Filters exhibit low protein binding, and its main application is filtration of non-aqueous samples.
| Type | Syringe Filter |
|---|---|
| Dimensions (L x W x H) | 22.9 x 28.4 mm |
| Outlet Style | Male Luer |
| Diameter (Metric) | 25 mm |
| Inlet Style | Female Luer Lock |
| Material (Membrane) | PTFE |
| Volume (Metric) | Up to 100 mL |
| Pressure Rating | 5.2 bar (75 psi) |
| Material | PTFE |
| For Use With (Application) | For HPLC, TLC, and GC sample clarification; HPLC solvent filtration |
| Sterility | Non-sterile |
| Filtration Area | 4.2 cm2 |
Cytiva Whatman™ Uniflo Syringe Filters, 0.45 μm PES
Whatman Uniflo Syringe Filters are disposable filter units designed to provide clean filtrate from small volumes up to 100 mL. They are available in a variety of membrane choices with a polypropylene overmold housing, and include both sterile and non-sterile options.
| Pore Size | 0.45 μm |
|---|---|
| Outlet Style | Male Slip Luer |
| Inlet Style | Female Luer Lock |
| Housing Material | Polypropylene |
| Material (Membrane) | PES |
| Pressure Rating | 67.5 psi |
| Sterility | Sterile |
| Filtration Area | 0.65 cm2 |
Thermo Scientific™ Nalgene™ Syringe Filters
Filter sample volumes of 10 to 100mL with these sterile syringe filters featuring a variety of membranes and pore sizes for most laboratory applications.
| Type | Syringe Filter |
|---|---|
| Housing Material | Polypropylene |
Cytiva Whatman™ Puradisc Nylon Syringe Filters: Nonsterile
Caters to a wide variety of sample types and applications, including capillary electrophoresis, biological preparations, protein filtration, and UV spectroscopy sample preparation. Whatman™ Puradisc Nylon Syringe Filters: Nonsterile are resistant to a range of organic solvents and suitable for use with high pH samples.
| Type | Syringe Filter |
|---|---|
| Dimensions (L x W x H) | 22.9 x 28.4 mm |
| Outlet Style | Male Luer |
| Diameter (Metric) | 25 mm |
| Inlet Style | Female Luer Lock |
| Housing Material | Pigment Free Polypropylene (PP) |
| Material (Membrane) | Nylon |
| Volume (Metric) | Up to 100 mL |
| Pressure Rating | 5.2 bar (75 psi) |
| Filter Type | Syringe Filter |
| For Use With (Application) | For aqueous or solvent-based solutions, HPLC, TLC, GC sampling |
| Sterility | Non-sterile |
| Filtration Area | 4.2 cm2 |
Sartorius Minisart™ PES Syringe Filters
Minisart™ PES with polyethersulfone (PES) is optimal for highest flow rates and a pH of 2 - 13. Type 1776D with a pore size of 0.22 μm can be used for sterile filtration and has a male luer slip outlet. Version ACK is individually packed and sterilized by ethylene oxide (EO).
Fisherbrand™ Syringe Filters: PTFE Membrane
Low hold-up volume helps you to recover virtually all of your sample after filtering
| Type | Syringe Filter |
|---|---|
| Material | PTFE |
| For Use With (Application) | Ideal for degassing/clarifying aqueous and solvent samples |
Cytiva Whatman™ Uniflo Syringe Filters, 0.2 μm PES
Whatman Uniflo Syringe Filters are disposable filter units designed to provide clean filtrate from small volumes up to 100 mL. They are available in a variety of membrane choices with a polypropylene overmold housing, and include both sterile and non-sterile options.
| Pore Size | 0.2 μm |
|---|---|
| Outlet Style | Male Slip Luer |
| Inlet Style | Female Luer Lock |
| Housing Material | Polypropylene |
| Material (Membrane) | PES |
| Pressure Rating | 67.5 psi |
| Sterility | Sterile |
| Filtration Area | 0.65 cm2 |
Cytiva Whatman™ Anotop™ 25 Non-Sterile Syringe Filters
Remove virtually 100% of particulates larger than pore size
| Disposable | Single-use |
|---|---|
| Type | Syringe Filter |
| Outlet Style | Male Luer Slip |
| Diameter (Metric) | 25 mm |
| Inlet Style | Female Luer Lock |
| Housing Material | Polypropylene |
| Material (Membrane) | Alumina-based Anopore |
| Temperature (Metric) Max | 45°C |
| Pressure Rating | 75psi |
| For Use With (Application) | HPLC aqueous/organic sample preparation; cold sterilization of growth media; solvent filtration for spectroanalysis; phage and virus filtration; liposome extrusion; removal of high molecular weight proteins or polymers; colloid removal from deionized water |
| Hold up Volume (After Air Purge) | <150 μL |
| Sterility | Non-sterile |
| Filtration Area | 4.78 cm2 |
Sartorius™ Minisart™ High Flow Syringe Filters: Sterile
Features PES membrane filter for excellent flow speed and high filtrable volume. Sartorius Minisart™ High Flow Syringe Filters: Sterile provide sterile filtration, particle removal and ultracleaning. Independent, ready-to-use syringe filters offer flow rates at low inlet pressures allowing for a correspondingly rapid sterile filtration.
| Disposable | Single-use |
|---|---|
| Housing Material | Meta acrylate butadiene styrene polymerisate (MBS) |
| Material (Membrane) | PES |
| Volume (Metric) | 200 mL |
| Quantity | 50 Pk. |
| Sample Volume | 1 to 200 mL |
| For Use With (Application) | For sterile and reliable filtration of small to medium volumes |
| Sterility | Sterile |
| Filtration Area | 6.2 cm2 |
| For Use With (Equipment) | Syringe |
| Diameter (Metric) | 28 mm |
| Inlet Style | Female Luer Lock |
| Packaging | Individually Packaged |
| Filter Type | Hydrophilic |
| Hold up Volume (After Air Purge) | 0.15 mL |
| Outlet Style | Male Leur-Slip |
|---|---|
| Diameter (Metric) | 33 mm |
| Inlet Style | Female Luer Lock |
| Housing Material | Acrylic |
| Material (Membrane) | PES |
| Quantity | 50/Pk. |
| Sterility | Sterile |
MilliporeSigma™ Millex™ Sterile Syringe Filters: Durapore™ PVFD Membrane
Ready-to-use, syringe-driven units designed for sterilizing and clarifying sterile solutions are available in 0.1, 0.22, 0.45 and 5.0μm pore sizes
| Disposable | Single-use |
|---|---|
| Temperature (English) Operating | 113°F |
| Housing Material | PVDF |
| Material (Membrane) | PVDF (Hydrophilic) |
| Color | Yellow |
| Quantity | 50/Pk. |
| Pressure Rating | 145 psi |
| Sterility | Sterile |
| Type | Syringe Filter, Medical |
| Outlet Style | Male Luer Slip |
| Diameter (Metric) | 3.3 cm |
| Inlet Style | Female Luer Lock |
| Tip Material | Modified Acrylic |
| Temperature Range (English) | 113°F |
| Certifications/Compliance | Meets USP Class VI Biological tests for plastics. All 33 mm filters are CE-marked and suitable for both medical and laboratory applications outside the U.S. |
| Temperature Range (Metric) | 45°C |
| Temperature (Metric) Operating | 45°C |
| Autoclavable | Not Autoclavable |
| Hold up Volume (After Air Purge) | <100 μL |
MilliporeSigma™ Millex™-SV Sterile Syringe Filter Unit, PVDF, 5.0 μm (Research Use Only)
Ready-to-use, syringe-driven units designed for sterilizing and clarifying sterile solutions are available in 0.1, 0.22, 0.45 and 5.0μm pore sizes