Parallel Evaporators
BUCHI Multivapor™ P-12 Parallel Evaporator Coil Condenser
A compact, 12 position parallel vortex evaporator that achieves high efficiency multiple sample evaporation with easy operation. Includes a Type S Coil Condenser for tab water or recirculating chillers.
BUCHI SyncorePlus Polyvap Parallel Evaporator System
SyncorePlus Polyvap allows fast evaporation of up to 96 samples in parallel to residue. In a system with the V-300 and I-300 Pro, the SyncorePlus is upgraded to a fully-automated instrument. Includes S-Condenser, V-300 vacuum pump with secondary condenser, I-300 Pro interface, and F-308 chiller.
BUCHI SyncorePlus Analyst Parallel Evaporator System
SyncorePlus Analyst is specially designed to evaporate samples to a specified volume as a pre-analytical step, with an S-Condensor the final volume is 1 mL. Includes a V-300 vacuum pump with secondary condenser, I-300 Pro interface, and F-308 recirculating chiller.
BUCHI SyncorePlus Polyvap Parallel Evaporator with Coil Condenser
SyncorePlus Polyvap allows fast evaporation of up to 96 samples in parallel to residue, S-Condenser unit included.
BUCHI Multivapor™ Parallel Evaporation System with Rotavapor connector
Evaporate up to 6 samples on one compact unit using your Rotavapor condenser and vacuum source
Heidolph™ Tubing - 62 mm
Tubing - 62 mm connects PTFE Cap to Gas Manifold of the Carousel 6 Classic Reaction Station
BUCHI SyncorePlus Analyst Parallel Evaporator with Coil Condenser
Specially designed to evaporate samples to a specified volume as a pre-analytical step. With a Type S Condensor, the final volume is 1 mL.
BUCHI Rotavapor R-100 Vertical Condenser Glass Assembly
A compact, 12 position parallel vortex evaporator that achieves high efficiency multiple sample evaporation with easy operation. Includes a Type C Coil Condensor, cold trap for dry ice cooling.
Organomation 12 Position N-EVAP Nitrogen Evaporator
The 12 position N-EVAP nitrogen evaporator (cat# 11155) is a compact unit that allows for up to 12 samples to be evaporated simultaneously. At each individual sample position, the gas flow can be controlled via a precision needle valve. This is ideal for the simultaneous evaporation of samples with varying evaporation end points. The sample tray has a spring tensioner which allows any test tube between 10-30 mm to be processed without any modifications to the instrument. An optional small sample holder allows samples with an outside diameter of 5-16 mm to be processed.
Glas Col LLC Evaporator
Evaporator for (24) 15mm vials, insert and gas inlet heated to 100 degrees C. 120V
Organomation 24 Position N-EVAP Nitrogen Evaporator
The 24 position N-EVAP is our most adaptable benchtop evaporator. The 24 position N-EVAP offers the most customizable options for your sample preparation needs. The standard sample holder can accommodate samples with an outside diameter of 10-30 mm. However, with the optional 8 position large sample holder, vials with an outside diameter of 30-70 mm can be processed. The 24 position N-EVAP test tube evaporator can also be upgraded to include digital controls for heat and time with the addition of the side control box (Option code -CB).These economical units provide controlled concentration of sample vials through the application of nitrogen gas within a heated water bath. The dual band spring hoist assembly provides a simple and effective means of removing samples from the heated dry bath.
ORGANOMATION MANUFACTURING INC MICROVAP 24-POS DRY BLOCK 4X6
NC2152960 MICROVAP 24-POS DRY BLOCK 4X6
Organomation 96-Well Microplate MICROVAP Nitrogen Evaporator
The single plate MICROVAP microplate evaporator is one of the most compact sample concentrators available, and it continues to meet the needs of the life science and pharmaceutical industries. This microplate concentrator is ideal for laboratories needing efficient solutions for the gentle evaporation of high capacity, low volume samples in 96-well microplates and 96-well deep well plates.In order to evaporate high boiling point solvents effectively, the digital temperature controller and solid aluminum heating unit provide uniform heat up to 130°C with temperature accuracy of +/- 2°C. The gas delivery manifold offers continuous evaporation via 2-inch x 19-gauge stainless steel needles. A version without heat is available for evaporations that will be performed at ambient temperatures.
Organomation 48 Position MULTIVAP Nitrogen Evaporator
The 48 position MULTIVAP nitrogen evaporator is a high temperature dry block model. This instrument contains a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to the needles or glass pipettes, which direct the gas onto the sample’s surface. This method results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has a toggle switch for every row of 6 samples, which allows individual rows to be shut off when evaporating batches of less than 48 samples. Nitrogen gas flow is also controlled by an adjustable flow meter and a built-in pressure regulator.The 48 position MULTIVAP parallel evaporator uses a heated aluminum dry block to reach evaporative temperatures ranging from 30°C to 120°C. Sample blocks are customized for the user’s sample size for maximum and even heat transfer.