Parallel Evaporators
BUCHI Multivapor™ P-12 Parallel Evaporator Coil Condenser
A compact, 12 position parallel vortex evaporator that achieves high efficiency multiple sample evaporation with easy operation. Includes a Type S Coil Condenser for tab water or recirculating chillers.
BUCHI Multivapor™ Parallel Evaporation System with Rotavapor connector
Evaporate up to 6 samples on one compact unit using your Rotavapor condenser and vacuum source
BUCHI Rotavapor R-100 Vertical Condenser Glass Assembly
A compact, 12 position parallel vortex evaporator that achieves high efficiency multiple sample evaporation with easy operation. Includes a Type C Coil Condensor, cold trap for dry ice cooling.
BUCHI SyncorePlus Polyvap Parallel Evaporator with Coil Condenser
SyncorePlus Polyvap allows fast evaporation of up to 96 samples in parallel to residue, S-Condenser unit included.
BUCHI SyncorePlus Polyvap Parallel Evaporator System
SyncorePlus Polyvap allows fast evaporation of up to 96 samples in parallel to residue. In a system with the V-300 and I-300 Pro, the SyncorePlus is upgraded to a fully-automated instrument. Includes S-Condenser, V-300 vacuum pump with secondary condenser, I-300 Pro interface, and F-308 chiller.
BUCHI SyncorePlus Analyst Parallel Evaporator with Coil Condenser
Specially designed to evaporate samples to a specified volume as a pre-analytical step. With a Type S Condensor, the final volume is 1 mL.
BUCHI SyncorePlus Analyst Parallel Evaporator System
SyncorePlus Analyst is specially designed to evaporate samples to a specified volume as a pre-analytical step, with an S-Condensor the final volume is 1 mL. Includes a V-300 vacuum pump with secondary condenser, I-300 Pro interface, and F-308 recirculating chiller.
BUCHI Multivapor™ P-12 Parallel Evaporator with Rotavapor Connection
A compact, 12-position parallel vortex evaporator that achieves high efficiency for multiple sample evaporation with an easy operation.
Heidolph™ Tubing - 62 mm
Tubing - 62 mm connects PTFE Cap to Gas Manifold of the Carousel 6 Classic Reaction Station
Glas Col LLC Evaporator
Evaporator for (48) 12mm vials insert/gas inlet heated to maximum 100 degrees C, 120V
Glas Col LLC Evaporator
Evaporator for 24 - 15mm vials, insert and gas inlet heated to 100 degrees C. 240V CE
Glas Col LLC Evaporator
Evaporator FlexiVap workstation with heating for small insert. 24 positions with flowmeter. Heating to 100 degrees C maximum. 120V, 50 psi.
Glas Col LLC Evaporator
Evaporator 96 well plates (3) insert and gas inlet heated to 100 degrees C. 240V CE
Organomation 6 Position N-EVAP Nitrogen Evaporator
The 6 position N-EVAP’s ability to expand the sample size range with an optional large sample holder makes it an ideal instrument for laboratories that will be evaporating up to 6 samples at once and are using a wide range of sample flask outside diameters. The standard instrument fits samples with an outside diameter of 10-30 mm, and the optional large sample holder can accommodate samples with an outside diameter of 30-56 mm.The 6 position N-EVAP sample concentrator (cat# 11106) was adapted from the 12 position N-EVAP (cat# 11155) in the early 1970s. Since its inception, it has proven to be durable, reliable, and the most affordable member of Organomation’s N-EVAP line. These economical units provide controlled concentration of sample vials through the application of nitrogen gas within a heated water bath.
Organomation 12 Position N-EVAP Nitrogen Evaporator
The 12 position N-EVAP nitrogen evaporator (cat# 11155) is a compact unit that allows for up to 12 samples to be evaporated simultaneously. At each individual sample position, the gas flow can be controlled via a precision needle valve. This is ideal for the simultaneous evaporation of samples with varying evaporation end points. The sample tray has a spring tensioner which allows any test tube between 10-30 mm to be processed without any modifications to the instrument. An optional small sample holder allows samples with an outside diameter of 5-16 mm to be processed.