Stirrer Accessories
Chemglass Life Sciences 10ft Extension Cord, Type "T" (Blue), Standard to Standard Plug
10ft Extension Cord, Type "T" (Blue), Standard to Standard Plug. Coiled extension cords to connect thermocouples to instrumentation such as temperature monitors, controllers and data loggers. Cords are 10ft long and made of 26-gauge multistrand wire with PVC insulation. All cords have a female standard (OST) with a choice of a male standard (OST) or mini (SMP) connection.
Chemglass Life Sciences PTFE Impeller Assembly, 171mm OAW x 368mm OAH, , for 15L VSA
Our PTFE impeller assemblies are designed to provide agitation forvertical side arm (VSA) vessels and spinners when used withcap adapter and Dura Drive overhead motor.PLEASE NOTE: STAINLESS STEEL IMPELLER ASSEMBLIES ARE AVAILABLE AS SPECIAL ORDER.
Chemglass Life Sciences Chemglass 29/42 Lower Joint Adapter for 10 mm Stir Shaft - Mechanical seal bearing, 1-3/4 in threaded connection (CG-2077-M-38)
Lower joint adapter for 29/42 ground joints that provides a dry-running mechanical seal for 10 mm stir shafts and a 1-3/4 in threaded connection. Supplied complete with perfluorinated O-rings and a loosening nut, the adapter resists aggressive chemicals while minimizing contamination and allowing vertical adjustment for different agitator styles.
- Provides a vacuum- and pressure-tight seal for 29/42 lower joints.
- Designed for 10 mm stir shafts and 1-3/4 in threaded connections.
- Includes perfluorinated O-rings and a loosening nut for chemical resistance.
- Dry-running mechanical seal rotates with the shaft to prevent contamination.
- Rated to 5 Torr vacuum and 2-3 psi pressure; seals up to 2000 rpm.
- Compatible with glass, metal, or PTFE-covered stir shafts and allows vertical adjustment.
Chemglass Life Sciences Agitator, PTFE, 10mm, Four Blade, 100mm Dia, Fits Shaft Size 10mm, 60° Impeller Angle
Agitator, PTFE, 10mm, Four Blade, 100mm Dia, Fits Shaft Size 10mm, 60¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45¿, 60¿ and 90¿ impeller angles. The 45¿ and 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft and locks onto shaft with a glass filled TFE screw.
Chemglass Life Sciences Stirrer Bearing, PTFE, Complete, fits 10mm Shaft, 45/50 Inner Joint
Stirrer Bearing, PTFE, Complete, fits 10mm Shaft, 45/50 Inner Joint. Grease-Free PTFE stirrer bearing designed for use in moderate vacuum applications. Bearing consists of a threaded glass adapter having the listed inner joint, a saddle o-ring, a body bushing with a compression and locking nut, and a precision PTFE inner bearing. The saddle o-ring provides only glass and PTFE contact with the reaction, while allowing for the vacuum tight seal. Design of the bearing permits replacement of the saddle o-ring at a fraction of the cost of the entire bearing. PLEASE NOTE: FOR USE ONLY WITH CG-2078 OR CG-2079 PRECISION GROUND AND POLISHED STIRRER SHAFTS.
Chemglass Life Sciences Stirrer Bearing, PTFE, Complete, fits 10mm Shaft, 29/42 Inner Joint
Stirrer Bearing, PTFE, Complete, fits 10mm Shaft, 29/42 Inner Joint. Grease-Free PTFE stirrer bearing designed for use in moderate vacuum applications. Bearing consists of a threaded glass adapter having the listed inner joint, a saddle o-ring, a body bushing with a compression and locking nut, and a precision PTFE inner bearing. The saddle o-ring provides only glass and PTFE contact with the reaction, while allowing for the vacuum tight seal. Design of the bearing permits replacement of the saddle o-ring at a fraction of the cost of the entire bearing. PLEASE NOTE: FOR USE ONLY WITH CG-2078 OR CG-2079 PRECISION GROUND AND POLISHED STIRRER SHAFTS.
Bellco Glass, Inc. Manufactured from 316l stainless steel. Impeller assembly for micro-carrier spinner flasks. 1965 series micro-carrier spinner flask Size: 100ml
Manufactured from 316l stainless steel. Impeller assembly for micro-carrier spinner flasks. 1965 series micro-carrier spinner flask Size: 100ml
Chemglass Life Sciences PTFE Impeller Assembly, 171mm OAW x 355mm OAH, for 6L Spinner
Our PTFE impeller assemblies are designed to provide agitation forvertical side arm (VSA) vessels and spinners when used withcap adapter and Dura Drive overhead motor.PLEASE NOTE: STAINLESS STEEL IMPELLER ASSEMBLIES ARE AVAILABLE AS SPECIAL ORDER.
Chemglass Life Sciences Stirring Shaft, 10mm, Button Style, for 2000mL to 12000mL Flasks, 515mm OAL
Stirring Shaft, 10mm, Button Style, for 2000mL to 12000mL Flasks, 515mm OAL. A 10mm precision ground stirrer shaft to fit CG-2070 through CG-2072 10mm bearings. Side button for attachment of CG-2080 or CG-2081 PTFE stirrer blades.PLEASE NOTE: THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2079.