Stirrer Accessories
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shape, Perforated, 10mm, for 1000mL Flasks, 34/45 minimum joint clearance
Stirrer Blade, PTFE, Banana Shape, Perforated, 10mm, for 1000mL Flasks, 34/45 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Blades are perforated. Made of 1/8" PTFE to fit 10mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
Med Vet International 3.5mm x 20mm Titanium Cortical Self-Tapping Screws, J1074CT, 6-Pack
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.
Sigma Aldrich Fine Chemicals Biosciences Pur A LyzerTM Maxi Dialysi
The Pur-A-Lyzer Dialysis Kits are an innovative dialysis tubing that can be conveniently loaded and unloaded using any standard pipette tip while still allowing for 98% sample recovery yield. The revolutionary design of the Pur-A-Lyzer Tube makes it the only dialysis tool which enables true high throughput dialysis accommodating a large number of samples in a single buffer tank.The Pur-A-Lyzer Dialysis Tube allows rapid high performance extraction of macromolecules without contamination. It is ideal for purification of proteins automated protein sequencing peptide mapping and amino acid analysis.
Bellco Glass, Inc. Glass Ball Impeller Only,100mL
Description: Glass Ball Impeller Assembly Only. MADE IN THE USASize: 100mLScrew Cap: Blue PP, 70mm OD x 22.4mm TCap Seal: Teflon, 67.9mm OD x 9.1mm TSealing Ring: Blue silicone rubber, 66.7mm OD x 47.6mm ID x 4.76mm TFlex Tube: Soft silicone, 41.3mm OAL, 0.312” OD x 0.248” IDMagnet Tube: Type 1 Class A Borosilicate Glass, 82mm OAL, 18mm OD ball, houses one cast alnico magnet
Bellco Glass, Inc. Glass Ball Impeller Only,3L
Description: Glass Ball Impeller Assembly Only. MADE IN THE USASize: 3000mLScrew Cap: Blue PP, 100mm OD x 22.4mm TCap Seal: Teflon, 95.3mm OD x 10.4mm TSealing Ring: Blue silicone rubber, 91.4mm OD x 76.2mm ID x 6.1mm TFlex Tube: Soft silicone, 76.2mm OAL, 0.312” OD x 0.248” IDMagnet Tube: Type 1 Class A Borosilicate Glass, 216mm OAL, 34mm OD ball, houses one cast alnico magnet
Grainger Paddle Gasket 1 In PTFE w/304SS White
The Grainger 16T709 Paddle Gasket PTFE is a gasket made of PTFE material with a paddle shape. It has an inside diameter of 2", an outside diameter of 3-1/2", and a thickness of 1/16". The operating temperature range is -450°F to 500°F. This gasket can be used for pharmaceutical, chemical, food processing, and other sanitary process applications. It meets FDA and USP Class VI standards. The gasket has adhesive on one side for easy installation. It comes in a package of 10 gaskets.
Bellco Glass, Inc. Rushton Impeller Assembly ,7L
Rushton impeller 2”OD with 6 vertical blades equally spaced around the center hub. Manufactured from stainless steel and designed for high speed fermentation protocols. Assembled onto 3L metric bioreactor drive stem.. MADE IN THE USA
Cole-Parmer IKA 0741300 Propeller Stirrer, 4-Bladed, 21.25" (540 mm) Shaft
A variety of propellers, paddles, clamps, and stands are available.
Enterprise Technology Solutions Genuine Joe Stirrer, Single Tube, Unwrapped, 5-1/2"L, 1000/BX, Black
Single-tube stirrers feature an extra-rigid, polypropylene construction to stay strong whether you're stirring hot or cold beverages. Long length makes it easy to use to help keep fingers away from your drink. Disposable material allows quick, easy cleanup after each use. Unwrapped stirrers are perfect for offices, restaurants, schools and more.
Chemglass Life Sciences SST Pitch Blade Impeller, 8L VSA, 6.5" W x 2.5" H Blade
Our SS pitch blade folding impeller assemblies are designed to provide optimum agitation forVertical Side Arm (VSA) vessels.These impellers will improve uplift mixing and increase mass transfer rates while minimizing shear to cultures.They can be used withcap adapter and Dura Drive Overhead Motor.The impellers are made from 316 SS and supplied with a dust shield as well as a locking ring to secure the paddle in a horizontal position once inserted into the flask.
Bellco Glass, Inc. Adj. Paddle Blades 15 - 36 L
Adjustable PTFE Microcarrier paddle blades only , 15-36L Paddle dimensions: 1 1/2" x 3 3/8". MADE IN THE USA.
