Electron Microscope Accessories
Electron Microscopy Sciences Hitachi M4, Hitachi M4
SEM specimen holder is 32 mm large double slot set screw vise with (2) 2.5 mm wide x 5 mm deep slots. Clamp thin specimens and cross sections. Machined aluminum with 2 stainless steel allen set screws. Includes allen wrench.
Type: Hitachi M4
Size: 32 mm
Electron Microscopy Sciences Formvar Support Film 20-30 nm thick on Hexagonal 400 mesh Gold Grid
A thin film of pure formvar resin coats the shiny side of a hexagonal grid. Coated grids are optically checked and batch tested in the electron microscope. Packed in grid storage box. Extra thick coating is 20 to 30 nm.
Grid: Gold
Electron Microscopy Sciences Formvar Support Film 3-4 nm thick on Single 100 µm hole Copper Grid
A thin film of pure formvar resin coats the shiny side of a single hole grid. Coated grids are optically checked and batch tested in the electron microscope. Packed in grid storage box. Ultra thin coating is 3 to 4 nm thick.
Grid: Copper
Electron Microscopy Sciences Carbon Support Film 10 nm thick on Gilder F1 Finder Gold Grid
A thin film of pure carbon coats the shiny side of a Gilder Finder grid. Coated grids are optically checked and batch tested in the electron microscope. Packed in grid storage box. Coating is 10 nm thick.
Grid: Gold
Electron Microscopy Sciences Formvar/Carbon Film 15-20 nm/3-4 nm thick on Square 400 mesh Gold Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid. Formvar is 15 to 20 nm thick with a 3 to 4 nm carbon coating.
Grid: Gold
Electron Microscopy Sciences Formvar Support Film 20-30 nm thick on Hexagonal 300 mesh Nickel Grid
A thin film of pure formvar resin coats the shiny side of a hexagonal grid. Coated grids are optically checked and batch tested in the electron microscope. Packed in grid storage box. Extra thick coating is 20 to 30 nm.
Grid: Nickel
Electron Microscopy Sciences Quantifoil Holey Carbon Film S 7/2 on Copper 400 mesh Grid
QUANTIFOIL is a perforated support foil with pre-defined hole size, shape and arrangement. It has advantages in electron microscopy (EM) or low-energy electron point source (LEEPS) microscopy when compared with conventional holey film.
QUANTIFOIL with square holes and relatively narrow bars can be used in EM to support a thin carbon film, which by itself is too fragile to span a grid square. Alternatively, this holey film can directly support an object that is larger than the holes.
Electron Microscopy Sciences EMS Lacey Formvar with Carbon Film on 300 mesh Gold Grid, 150 µm Holes
This carbon coated film on a broken pattern consists of woven-mesh-like openings of different sizes and shapes. Average opening sizes are 50, 100 and 150 microns. This type of pattern provides support but does not interfere when observing specimen section
Grid: Gold
Holes: 150 µm
Electron Microscopy Sciences EMS Lacey Formvar with Carbon Film on 200 mesh Nickel Grid, 100 µm Holes
This carbon coated film on a broken pattern consists of woven-mesh-like openings of different sizes and shapes. Average opening sizes are 50, 100 and 150 microns. This type of pattern provides support but does not interfere when observing specimen section
Grid: Nickel
Holes: 100 µm
Electron Microscopy Sciences Carbon Support Film 3-4 nm thick on Single 1000 µm hole Copper Grid
A thin film of pure carbon deposited on the shiny side of the single hole grid. All of our coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. Ultra thin coating is 3 to 4 nm thick.
Grid: Copper
Electron Microscopy Sciences Quantifoil Holey Carbon Film R 5/20 on Copper 200 mesh Grid
QUANTIFOIL is a perforated support foil with pre-defined hole size, shape and arrangement. It has advantages in electron microscopy (EM) or low-energy electron point source (LEEPS) microscopy when compared with conventional holey film.
QUANTIFOIL with circular holes is used in cryo-electron tomographic reconstruction. The roundness of the holes is advantageous with respect to the formation of an ice layer of constant thickness. The whole size chosen depends on the magnification used, and on whether or not one wishes to include support film in the image. Assessment of the image quality is easier when foil is included in the picture, because the power spectrum of a foil is stronger than that of unsupported ice.
Electron Microscopy Sciences Formvar/Carbon Film 5-6 nm/1 nm thick on Square 300 mesh Nickel Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid. Formvar is 5-6 nm thick with a 1 nm carbon coating.
Grid: Nickel
Electron Microscopy Sciences Carbon Support Film 20-30 nm thick on Thin Bar Square 400 mesh Nickel Grid
A thin film of pure carbon deposited on one side of the thin bar square grid. All of our coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. Extra thick coating is 20 to 30 nm.
Grid: Nickel
Electron Microscopy Sciences Quantifoil Holey Carbon Film R 0.6/1 on Copper 400 mesh Grid
QUANTIFOIL is a perforated support foil with pre-defined hole size, shape and arrangement. It has advantages in electron microscopy (EM) or low-energy electron point source (LEEPS) microscopy when compared with conventional holey film.
QUANTIFOIL with circular holes is used in cryo-electron tomographic reconstruction. The roundness of the holes is advantageous with respect to the formation of an ice layer of constant thickness. The whole size chosen depends on the magnification used, and on whether or not one wishes to include support film in the image. Assessment of the image quality is easier when foil is included in the picture, because the power spectrum of a foil is stronger than that of unsupported ice.
Grid: Copper
Mesh: 400
Electron Microscopy Sciences EMS Holey Carbon Film 150 µm holes on 200 mesh Nickel
A thin film of carbon with round holes. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid.
Grid: Nickel
Holes: 150 µm