Electron Microscope Accessories
Ted Pella Inc 45º SEM Mount, 10/pack
45º SEM Mount Ø12.7mm for FEI, TESCAN, ZEISS (also for Philips, LEO, Cambridge, AMRAY, Leica, CamScan, ETEC) SEMs. Aluminum, grooved edge, 7.8mm pin height.
Ted Pella Inc PELCO X-TREME SEM Storage Box and holder for up to 18 of the 12.7mm SEM pin mounts
Very strong and rugged clear polycarbonate box to store standard pin mounts with 3.2mm (1/8"). This box is watertight, crushproof and dustproof. The strong hinges, locking clasps and soft silicone O-ring seal makes this an ideal transport, shipping and storage box for SEM samples on pin mounts. The holder insert is numbered 1-18 and accommodates all types of pin mounts form 6.4 to 50mm diameter.
Electron Microscopy Sciences Formvar/Carbon Support Film 15-20 nm/1 nm thick on 2X1 mm Slot Grid Copper Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is 15 to 20 nm thick with a 1 nm carbon coating.
Grid: Copper
Electron Microscopy Sciences EMS 400 mesh Square Grid, Copper
Grids are 3.05 mm diameter.
Grid: Copper
Thickness: Up to 19 µm +/-5 µm
Pitch: 62 µm
Hole: 37 µm
Bar: 25 µm
Electron Microscopy Sciences Formvar/Carbon Support Film 10 nm/1 nm thick on 2 X 1 mm Slot Grid Nickel Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Nickel
Electron Microscopy Sciences SEM Clip Specimen Block, 8 Clips
Engraved specimen block. Numbered. Measures 12 x 48 mm. Comes complete with pin. The 8 clip is numbered 1-8.
Cytiva Centrassette P holder including torque wrench and socket
Centrassette P holder including torque wrench and socket
Ted Pella Inc PELCO Tabs™, Carbon Conductive Tabs, 6mm OD
The simplicity of application and smooth, clean surfaces of PELCO Tabs™ Carbon Conductive Tabs are a significant improvement compared to many of the other common adhesives that have been used in SEM mounting. Both tab sides have a thick conductive adhesive (conductive inner tab is 35µm and the adhesive is 45µm on each side for a total thickness of 125µm [5 mils]) with a liner on both sides, a transparent liner and white liner respectively. They are ready for immediate use. The top protective liner does not have to be removed until the sample is ready to be mounted. This reduces possible contamination. Outgassing is negligible.
Ted Pella Inc Ultrathin Carbon Film on Lacey Carbon Support Film, 300 mesh, Gold, 25/pk
Pure carbon support films with no Formvar backing. This new product has an even thinner carbon film which is mounted on a Lacey carbon film. The carbon support layer lying over the holes is less than 3nm in thickness and is the thinnest support film available. It is particularly useful for high resolution microscopy of low contrast particles and is also ideal for use with the Energy Filtering TEM.
Electron Microscopy Sciences EMS Platinum Aperture with Spray 1000 µm, 12.7 mm O.D.
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: Spray 1000 µm
O.D.: 12.7 mm
Electron Microscopy Sciences Goniometer Bases, Type B3
Goniometer Bases tightly capture the MicroRT tubing for seamless room and low-temperature data collection. For 19 mm MicroMounts, with the flat ledge.
Electron Microscopy Sciences MicroMesh™ Crystal Mount, 400 µm with 10 µm openings, SPINE Pin length
MicroMesh Mounts are the tool of choice for microcrystal crystallography and diffraction experiments, especially at micro-focus beam-lines. They have been use in de novo protein structure determination from crystals as small as 5um.
They are excellent for rods shaped crystals, and are superior to mount with elliptical apertures, because the mesh provides continuous, gentle support for rods of all sizes.
MicroMesh produce the smallest background scatter of any commercial mount. Their sieve-like action allows easy retrieval of sub 30um crystals.
Mesh: 400 µm
Type: 10 µm openings
Pin length: SPINE
Electron Microscopy Sciences Goniometer Bases, Type B1A
Goniometer Bases tightly capture the MicroRT tubing for seamless room and low-temperature data collection. Without flat ledge. 416 magnetic stainless steel
Electron Microscopy Sciences MicroMesh™ Crystal Mount, 400 µm with 25 µm openings, SPINE Pin length
MicroMesh Mounts are the tool of choice for microcrystal crystallography and diffraction experiments, especially at micro-focus beam-lines. They have been use in de novo protein structure determination from crystals as small as 5um.
They are excellent for rods shaped crystals, and are superior to mount with elliptical apertures, because the mesh provides continuous, gentle support for rods of all sizes.
MicroMesh produce the smallest background scatter of any commercial mount. Their sieve-like action allows easy retrieval of sub 30um crystals.
Mesh: 400 µm
Type: 25 µm openings
Pin length: SPINE
Electron Microscopy Sciences MicroMesh™ Crystal Mount, 700 µm with 25 µm openings, 11 mm Pin length
MicroMesh Mounts are the tool of choice for microcrystal crystallography and diffraction experiments, especially at micro-focus beam-lines. They have been use in de novo protein structure determination from crystals as small as 5um.
They are excellent for rods shaped crystals, and are superior to mount with elliptical apertures, because the mesh provides continuous, gentle support for rods of all sizes.
MicroMesh produce the smallest background scatter of any commercial mount. Their sieve-like action allows easy retrieval of sub 30um crystals.
Mesh: 700 µm
Type: 25 µm openings
Pin length: 11 mm