Electron Microscope Specimen Mounts and Holders
Ted Pella Inc PELCO X-TREME SEM Storage Box and holder for up to 18 of the 12.7mm SEM pin mounts
Very strong and rugged clear polycarbonate box to store standard pin mounts with 3.2mm (1/8"). This box is watertight, crushproof and dustproof. The strong hinges, locking clasps and soft silicone O-ring seal makes this an ideal transport, shipping and storage box for SEM samples on pin mounts. The holder insert is numbered 1-18 and accommodates all types of pin mounts form 6.4 to 50mm diameter.
Ted Pella Inc 45º SEM Mount, 10/pack
45º SEM Mount Ø12.7mm for FEI, TESCAN, ZEISS (also for Philips, LEO, Cambridge, AMRAY, Leica, CamScan, ETEC) SEMs. Aluminum, grooved edge, 7.8mm pin height.
Electron Microscopy Sciences Hitachi M4 SEM Cylinder Mount 2" surface, 1/4" height, Aluminum
Hitachi M4 Thread SEM mounts made from lathe finished ultra-pure aluminum.
Head: 2"
Height: 1/4"
Electron Microscopy Sciences Multi Holder for 29 pin stubs, 3.2 mm x 8mm Pin
This 90 mm in diameter multi pin holder is designed to save time. It is made from machined aluminum with 302 stainless steel springs that hold the pin stubs in place. It accommodates up to twenty nine standard 12.7 mm (1/2") pin stubs
Type: 3.2 mm x 8mm Pin
Electron Microscopy Sciences Grid Boxes for use in routine grid handling and long term storage. Capable of storing 3.05 mm or 2.3 mm diameter grids, 25 column card.
Our grid boxes are for use in routine grid handling and long term storage. Each diamond will hold Stores 3.05 mm or 2.3 mm diameter grids. The two side features allow easier handling during specimen removal. Grid can be catalogued using the alpha numeric index on the side and the durable 25 column card for record keeping. EMS25 is a small grid storage box, designed as a low alternative to larger grid boxes.
Cytiva Centrassette P holder including torque wrench and socket
Centrassette P holder including torque wrench and socket
Electron Microscopy Sciences Metallurgical Mount Holder 1 1/2" and 40 mm, Hitachi M4
This set screw vice which is made from machined aluminum with stainless steel allen set screws has an open slot that is 10 mm (.394") wide x 5 mm (.197") deep. It measures 25 mm (1”) dia. x 17.5 mm (0.69”) high.
Type: Hitachi M4
Electron Microscopy Sciences Large Set Screw Vise, Ø25 mmx10 mm (H), Hitachi M4
This set screw vice which is made from machined aluminum with stainless steel allen set screws has an open slot that is 10 mm (.394") wide x 5 mm (.197") deep. It measures 25 mm (1”) dia. x 17.5 mm (0.69”) high.
Type: Hitachi M4
Electron Microscopy Sciences Standard Pin SEM Stub 45° & 90° Low Profile, 1/2" Head with 3/8" Pin, Aluminum
45° & 90° low profile SEM specimen mount with aluminum slotted head for use with FEI, Tescan, Zeiss, Philips, Leo, Cambridge, AMRAY, Leica, CamScan, ETEC. Made from ultra-pure aluminum.
Head: 1/2"
Pin height: 3/8"
Electron Microscopy Sciences JEOL SEM Cylinder Mount 1-1/4" surface, 13/16" height, Aluminum
Cylinder specimen mounts are for use with JEOL scanning electron microscopes. The mounts are made from ultra-pure aluminum with a standard lathe finish.
Head: 1-1/4"
Height: 13/16"
Electron Microscopy Sciences Applied Physics CeB6 Cathode for Leica Lithography SMVM
Lanthanum hexaboride (LaB6) and cerium hexaboride (CeB6) cathodes are ideal for many small spot size applications such as SEM, TEM, surface analysis and metrology, and for high current applications such as microwave tubes, lithography, electron-beam welders, X-ray sources and free electron lasers. Greater brightness from low work function yielding higher currents at lower temps than tungsten. Cambridge SMVM base.
Type: CEBIX (CeB6)
Angle: 90°
Tips: 20 mm