Electron Microscope Accessories
Electron Microscopy Sciences Dual Micrometer Calibration Slide PS52N with UKAS
Dual imperial/metric scales calibration slide. 50 mm in 0.1 mm divisions and 2" in 0.005" divisions. In wooden case. Ideal for calibrating optical products with a large field of view, such as stereo microscopes or imaging systems. Negative pattern formed in low reflective chrome for incident light applications. 76 mm x 25 mm.
Electron Microscopy Sciences SEM Mount Hitachi M4 1" Surface 9-Division, 1/4" height, Aluminum
Hitachi cylinder mount has a M4 tapered hole with female thread. Made from lathe finished ultra-pure aluminum. M4 tapered hole.
Head: 1"
Height: 6 mm
Electron Microscopy Sciences Hitachi M4 SEM Cylinder Mount 1-1/4" surface with 12 Divisions, 1/4" height, Aluminum
Hitachi M4 Thread SEM mounts made from lathe finished ultra-pure aluminum.
Head: 1-1/4"
Height: 1/4"
Electron Microscopy Sciences Hitachi M4 SEM Cylinder Mount 5/8" surface, 3/8" height, Aluminum
Hitachi M4 Thread SEM mounts made from lathe finished ultra-pure aluminum.
Head: 5/8"
Height: 3/8"
Electron Microscopy Sciences Multi Pin Stub Adapter, JEOL
This multi pin stub adapter for JEOL is designed to save time. It is made from vacuum aluminum with stainless steel set screws. It accommodates up to four standard 12.7 mm (1/2") pin stubs with 3.2 mm (1/8") pin.
Type: JEOL
Electron Microscopy Sciences Forensic Certified SEM Mount 8 mm pin
This mount is made from a special certified Aluminum alloy which does not contain any of the objectionable elements that may interfere with samples collected for GSR . These mounts are 12.7 mm x 11 mm.
Electron Microscopy Sciences Multi Holder 45 degree for 6 pin stubs, Hitachi M4
This 35 mm in diameter 45 Degree multi pin holder is designed to save time. It allows for a higher SE signal without having to tilt the specimen. It is made from machined aluminum with stainless steel Allen set screws. It accommodates up to six standard 12.7 mm (1/2") pin stubs.
Type: Hitachi M4
Electron Microscopy Sciences Metallurgical Mount Holder Hitachi M4
This mount holder which is made from machined aluminum with stainless steel Allen screws is specifically for 1" or 25 mm metallurgical mounts.
Electron Microscopy Sciences Multi Holder for 29 pin Stubs, Hitachi M4
This 90 mm in diameter multi pin holder is designed to save time. It is made from machined aluminum with 302 stainless steel springs that hold the pin stubs in place. It accommodates up to twenty nine standard 12.7 mm (1/2") pin stubs
Type: Hitachi M4
Electron Microscopy Sciences Critical Point Dryer 24 Specimen Holder
Machined from solid steel and brass/nickel plated. Incorporates a stainless steel mesh top and bottom to allow for fluid exchange. Comes with two sections; each section holds 12 specimens in 12 cavities cavity measures 4.5mm(D) x 6mm(H)..
Electron Microscopy Sciences Veco Hexagonal with Handle 150 mesh Nickel Grid
Veco Grids offer superior handling characteristics. Plus, with a 0.8 mil thickness, Veco Grids are the most rigid grids available. 3.05 mm diameter and 0.8 mil thickness.
Grid: Nickel
Pitch: 167 µm
Hole: 117 µm
Bar: 50 µm
Electron Microscopy Sciences Formvar/Carbon Support Film 10 nm/1 nm thick on London Finder LF400 Nickel Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Nickel
Electron Microscopy Sciences Formvar/Carbon Film 15-20 nm/3-4 nm thick on Hexagonal 200 mesh Gold Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is 15 to 20 nm thick with a 3 to 4 nm carbon coating.
Grid: Gold
Electron Microscopy Sciences Formvar Support Film 3-4 nm thick on London Finder LF135 Copper Grid
A thin film of pure formvar resin coats the shiny side of a London finder grid. Coated grids are optically checked and batch tested in the electron microscope. Packed in grid storage box. Ultra thin coating is 3 to 4 nm thick.
Grid: Copper
Electron Microscopy Sciences Formvar Support Film 20-30 nm thick on 2X1 mm Slot Grid Gold Grid
A thin film of pure formvar resin coats the shiny side of a slotted grid. Coated grids are optically checked and batch tested in the electron microscope. Packed in grid storage box. Extra thick coating is 20 to 30 nm.
Grid: Gold