Electron Microscope Accessories
Electron Microscopy Sciences Metallurgical Mount Holder 1" and 30 mm, 3.2 mm x 8mm Pin
This mount holder which is made from machined aluminum with stainless steel Allen screws. Desgned specifically for use with 1 1/4" and 30 mm metallurgical mounts.
Type: 3.2 mm x 8 mm Pin
Electron Microscopy Sciences Carbon Support Film 5-6 nm thick on Single 400 µm hole Nickel Grid
A thin film of pure carbon deposited on the shiny side of the single hole grid. All of our coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. Standard thickness is 5-6 nm.
Grid: Nickel
Electron Microscopy Sciences Carbon Support Film 5-6 nm thick on Thin Bar Square 300 mesh Copper Grid
A thin film of pure carbon deposited on one side of the thin bar square grid. All of our coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. Standard thickness is 5-6 nm.
Grid: Copper
Electron Microscopy Sciences Formvar/Carbon Support Film 10 nm/1 nm thick on London Finder LF200 Nickel Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Nickel
Electron Microscopy Sciences EMS Molybdenum Aperture with 30 µm hole, 6 mm O.D., 0.24 mm thick
O.D.: 6 mm
Thickness: 0.24 mm
Electron Microscopy Sciences Large Set Screw Vise, Ø25 mm, 3.2 mm x 8mm Pin
This set screw vice which is made from machined aluminum with stainless steel allen set screws has an open slot that is 10 mm (.394") wide x 5 mm (.197") deep. It measures 25 mm (1”) dia. x 17.5 mm (0.69”) high.
Type: 3.2 mm x 8 mm Pin
Electron Microscopy Sciences EMS Molybdenum Aperture with 70 µm hole, 3 mm O.D., 0.165 mm thick
O.D.: 3 mm
Thickness: 0.165 mm
Electron Microscopy Sciences EMS Molybdenum Aperture with 100 µm hole, 4 mm OD, 0.165 mm thick
O.D.: 3 mm
Thickness: 0.165 mm
Electron Microscopy Sciences EMS Molybdenum Aperture with 50 µm hole, 3 mm O.D., 0.165 mm thick
O.D.: 3 mm
Thickness: 0.165 mm
Electron Microscopy Sciences EMS Molybdenum Aperture with 1000 µm hole, 12.7 mm O.D., 0.25 mm thick
O.D.: 12.7 mm
Thickness: 0.25 mm
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/1 nm thick on Single 1000 µm hole Nickel Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Nickel
Electron Microscopy Sciences Formvar/Carbon Support Film 10 nm/1 nm thick on 2X0.5 mm Slot Grid Copper Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Copper
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/1 nm thick on Thin Bar Hexagonal 400 mesh Copper Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Copper
Electron Microscopy Sciences EMS Lacey Formvar with Carbon Film on 200 mesh Copper Grid, 100 µm Holes
This carbon coated film on a broken pattern consists of woven-mesh-like openings of different sizes and shapes. Average opening sizes are 50, 100 and 150 microns. This type of pattern provides support but does not interfere when observing specimen section
Grid: Copper
Holes: 100 µm
Electron Microscopy Sciences EMS Lacey Formvar with Carbon Film on 300 mesh Copper Grid, 150 µm Holes
This carbon coated film on a broken pattern consists of woven-mesh-like openings of different sizes and shapes. Average opening sizes are 50, 100 and 150 microns. This type of pattern provides support but does not interfere when observing specimen section
Grid: Copper
Holes: 150 µm