Electron Microscope Accessories
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/20-30 nm thick on Single 75 µm hole Copper Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 20 to 30 nm of carbon.
Grid: Copper
Electron Microscopy Sciences Formvar/Carbon Support Film 15-20 nm/1 nm thick on 2X1 mm Slot Grid Nickel Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is 15 to 20 nm thick with a 1 nm carbon coating.
Grid: Nickel
World Precision Instrument SU-MP85 Micromanipulator-SU-MP85-L
The classic micromanipulator developed by Sir Huxley many years ago is still considered by many investigators to be the finest manual micromanipulator available. The SU-MP85 offers the advantage of a very large range of movement with its built-in coarse manipulator and precise submicron movement with the fine controls. Coarse positioning is achieved with a three axis manipulator mounted on top. The ultrafine positioning is accomplished with the large micrometers mounted on the base. These micrometers provide smooth, precise movement through a 10:1 reduction mechanism.
World Precision Instrument Trio 3-Axis Micromanipulator-SU-TRIO235
The new SU-TRIO245 is a highly stable 3-axis manipulator with 25 mm of travel on each axis. The TRIO's synthetic 4th axis can be set in software as any angle between 0 and 90º for diagonal movement. Based on a lead-screw design with a smaller overall size and footprint than most manipulators, the SU-TRIO245 is ideal for applications that require 2 pipettes in one setup or for setups where space is limited.
World Precision Instrument SU-MPC200 Motorized Micromanipulator Controllers-505092
Neurobiological experiments are becoming more complex. Many require multiple manipulators with control units that quickly become space and/or cost prohibitive. The MPC-200 is the solution you have been asking for. A single controller capable of running 2 manipulators! With the simplicity of the SU-MP225 controller, it was expanded to run two manipulators from a single controller/ROE. The MPC-200 works with one or two of our world-renowned mechanicals, the SU-MP285 (SU-MPC385), the SU-MP225 (SU-MPC325) or the narrow format SU-MP265 (SU-MPC365).
Medchemexpress LLC Fndr-20123 | 2641930-61-0 | MFCD33402164 | 98.1% | C21H24ClN5O2 | 10MG
FNDR-20123 is an orally active anti-malarial histone deacetylase (HDAC) inhibitor with low-nanomolar activity against both Plasmodium and human HDAC enzymes. It inhibits multiple HDAC isoforms, shows potency against asexual and sexual blood stages of Plasmodium falciparum, and retains activity versus tested resistant strains. Supplied as a solid and as a 10 mM solution in DMSO, the compound is characterized with ~98% purity.
Ted Pella Inc Standard SEM Pin Stub Mount, Ø12.7mm x 8mm pin height, 1000/pack
FEI, Tescan, ZEISS (also for Philips, Aspex, LEO, Cambridge, AMRAY, Leica, CamScan, ETEC), aluminum, grooved edge
Electron Microscopy Sciences Static Master 1" Replacement Cartridge
Easily install a new cartridge without returning the brush to the factory.
Electron Microscopy Sciences EMS 100 Grid Storage Box
Used for the storage of TEM grids for routine grid handling, transport and long term TEM grid storage. For standard grids that are 3.05 mm in diameter. Anti Static treated
Instech Luer stub / blunt needle, 15ga x 0.5in (12mm). Amber. 50 sterile pouches of 5.
Luer stub / blunt needle, 15ga x 0.5in (12mm). Amber. 50 sterile pouches of 5.
Grainger Lampholder INC Surface Mount Bronze
The W.F. Harris Lighting 14G262 is an outdoor lampholder designed for surface mounting applications. It features a porcelain socket with nickel plated brass shell and backplate. The lampholder accepts medium base bulbs up to 300W. It has a pull chain socket with 8" lead wires and is UL and CUL listed for wet locations. The dimensions are 4-1/2" diameter x 2-3/4" projection. This surface mount lampholder provides a durable and weatherproof socket for outdoor lighting fixtures.
Koehler Instrument Company Inc TEST STRIP POLISH VISE SINGLE
NC3476511 TEST STRIP POLISH VISE SINGLE
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/3-4 nm thick on Hexagonal 100 mesh Gold Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 3 to 4 nm of carbon.
Grid: Gold
Electron Microscopy Sciences Carbon Support Film 3-4 nm thick on Thin Bar Hexagonal 600 mesh Copper Grid
A thin film of pure carbon deposited on one side of the thin bar hexagonal grid. All of our coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. Ultra thin coating is 3 to 4 nm thick.
Grid: Copper