Microscope Lamps and Accessories
Ted Pella Inc Ø3" Silicon Wafer, Type P / <111>
These 3" diameter silicon wafers can be used either as a substrate for thin film research or to make small silicon substrates by dicing the wafer into smaller pieces using a scriber and the Wafer Cleaving / Glass Breaking Pliers. The wafer is shipped in a wafer carrier.
Electron Microscopy Sciences Anti-Vibration Platform Table Drawer
Modular accessories for AMF and AMP vibration isolation platforms.
Electron Microscopy Sciences Cargille Immersion Oil Type HF 4 OZ
After years of development and field testing, we now have available two new PCB-Free Immersion Oils for Fluorescence Microscopy. A new Immersion Oil called HF which would provide low fluorescence and the correct optical properties.
Electron Microscopy Sciences Omniprobe FIB Lift-Out Grid 4-Post, Copper
Custom 4-post lift-out grids for in-situ lift-out. Include multiple indexed mounting locations, two with vertical bars attachment surfaces and two with "V" shaped alignment surfaces. Sides have lower profile for easier access to outermost posts. 3 mm diameter.
Material: Copper
Electron Microscopy Sciences Gilder Thin Bar Hexagonal 600 mesh Nickel Grid
Thin Bar Grids have been developed using a new technology to produce ultra-fine grids with thinner cross bars than regular grids. The result is equally firm specimen support but with 40% more open area for viewing maximum specimen surface area. 3.05 diameter, 0.8 mil thickness.
Grid: Nickel
Pitch: 37 µm
Hole: 29 µm
Bar: 8 µm
Electron Microscopy Sciences Weibel 2 Graticle NGW2, 16mm
Used when making a surface to volume ratio of a structure per mass unit. This graticule consists of a number of short lines with interruptions as long as the lines. Basically, the number of intersections falling over the short lines is counted and the number of endpoints falling on the end of the structure is determined. Reference: E.R. Weibel, Journal of Microscopy Vol. 95. pp 373-378. Current Capabilities and Limitations of Available Sterrological Technique, point counting method.
Size: 16 mm
THORLABS INC Ø1/2" Post Holder, Spring-Loaded Hex-Locking Thumbscrew, L = 3"
Ø1/2" Post Holder, Spring-Loaded Hex-Locking Thumbscrew, L = 3"
Electron Microscopy Sciences Thompson Graticle G23, 19mm
For counting particles in any of three areas of known size. The graticule is calibrated in the same manner as a normal eyepiece scale. The result is then used to calculate the area of any square.
Size: 19mm
Divisions: 10 mm, 7 mm and 4 mm squares
Electron Microscopy Sciences Metallurgical Graticle G43, 19mm, ASTM Carbide
Standard pattern discs for metallurgical stereometric analysis of grain size in polished metal sections. Grain sizing (E112) glass sandwich.
Size: 19mm
Method: ASTM Carbide
Surface: Glass sandwich
Electron Microscopy Sciences Metallurgical Graticle G55, 16mm, ASTM 25
Standard pattern discs for metallurgical stereometric analysis of grain size in polished metal sections. ASTM 25 point square grid, glass sandwich.
Size: 16mm
Method: ASTM 25
Surface: Glass sandwich
Grace Bio Labs Inc SS1X9 IMAGING SPACER PK/100
SS1X9-SecureSeal™ Imaging Spacer, 9mm Diameter ID X 0.12mm Depth, 18mm X 18mm OD - 100 PACK
Electron Microscopy Sciences Embra Finder 300 mesh Grid, Nickel
Standard 3.05 mm diameter grids which have one straight and one round cut out from the rim which assists in the orientation of the grid.
Grid: Nickel
Electron Microscopy Sciences Fine 2000 Mesh on Sandwich Grid, Copper
These fine mesh grids are carefully checked. They are suitable for the low magnification range of a TEM. Sandwich in a folding 3.05mm mesh grid.
Material: Copper
Electron Microscopy Sciences Embra Finder 100 mesh Grid, Copper
Standard 3.05 mm diameter grids which have one straight and one round cut out from the rim which assists in the orientation of the grid.
Grid: Copper
Electron Microscopy Sciences Metallurgical Graticle G54, 16mm, ASTM 24
Standard pattern discs for metallurgical stereometric analysis of grain size in polished metal sections. ASTM 24 point circular grid, glass sandwich.
Size: 16mm
Method: ASTM 24
Surface: Glass sandwich