Microscope Lamps and Accessories
Cole-Parmer Meiji Techno S-4300+FS Boom Microscope Stand; can be tilted 180°
Use the components below to build a microscope that best suits your application. We offer a variety of microscope bodies, stands, eyepieces, and ring lights. Components are interchangeable—mix and match to design your perfect microscope! Choose from basic microscope stand, standard microscope stands, or boom microscope stands. Order microscope and eyepieces separately.
Microscope World Stage Micrometer 1" and 25mm
Stage micrometer with two scales on it - 1" and 25mm. 1" ruler is equally spaced and numbered 0 through 10. 25mm rulers is equally spaced and numbered 0 through 25.
Ted Pella Inc LACEY FORMVAR/CARBON 300M 50/P
Grid, Lacey Formvar/Carbon, 300 Mesh, Copper, Grid Hole Size: ~63microm, A Lacey Formvar film coated with a heavy layer of carbon
Ted Pella Inc Double 90º SEM Mount, Ø25mm
Double 90º SEM Mount Ø25mm, pin leg fits into FEI, Tescan, ZEISS (also for Philips, Leo, Cambridge, AMRAY, Leica, CamScan, ETEC) SEMs. Aluminum, grooved edge, 9.5mm pin height.
Ted Pella Inc Low Profile 45º - 90º Mount, short 6mm pin
Low profile 45º / 90º SEM Mount Ø12.7mm, short 6mm pin for ZEISS/LEO. Aluminum, grooved edge.
Chroma Technologies KEYENCE BZX MICROSCOPE ET- CY7
Chroma filter sets mounted in cubes for Keyence BZX Microscope ET- CY7 ET710/75x ET810/90m T760lpxr-UF1
Electron Microscopy Sciences Gilder Thin Bar Square 300 mesh Nickel Grid
Thin Bar Grids have been developed using a new technology to produce ultra-fine grids with thinner cross bars than regular grids. The result is equally firm specimen support but with 40% more open area for viewing maximum specimen surface area. 3.05 diameter, 0.8 mil thickness.
Grid: Nickel
Pitch: 83 µm
Hole: 73 µm
Bar: 10 µm
:
Electron Microscopy Sciences Double FIB Sample and Grid Holder, Pin, 1/2"
Holds a FIB sample mounted on two standard 1/2" (12.7 mm) pin stubs for FIB milling and lift-out procedures. Conveniently holds two FIB grids close to the sample to mount prepared TEM lamellae on the FIB grid for TEM imaging. Cost-effective holder suitable for all FIB/SEM systems which accept pin mount holders, including the FEI, ZEISS and Tescan systems. For the JEOL and Hitachi systems, use a pin mount adapter.
Overall Dimensions: 36.5 x 12.7 x 11.6 mm (1.44" x 0.5" x 0.46").
Pin: Standard 3.2 mm ( 1/8").
Material: Vacuum grade aluminum with brass screws.
Includes Philips screwdriver #0.
Rp Cargille Laboratories Inc SERIES A REFRACTIVE INDEX LIQU
If Letter of Certification is required enter new line Cat# 88101, NC4003687 -- $ 25.00 is required