Microscope Accessories and Replacement Parts
General accessories and parts for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Electron Microscopy Sciences AMD-SM Microscope Workstation, 90 x 75 cm, Stainless Steel Surface
Microscope workstations featuring a unique Sorbothane isolator design removing up to 98 percent of unwanted vibrations.
Size: 90 x 75 cm
Surface: Stainless Steel
Electron Microscopy Sciences Small SEM Clamp, 15 x 10 mm, 3.2 mm
15 mm (0.6") long with 10 mm (0.4") wide clamping area and standard pin stub 3.2 mm ( 1/8"). Suitable for holding samples up to 7 mm overall thickness. Perfect for small tubes, strips, wires, and smaller flat samples. Overall Dimensions 23 x 20 x 9 mm (0.9" x 0.78" x 0.35"). Made from machined aluminum with brass screws.
Size: 15 x 10 mm
Pin diameter: 3.2 mm
Electron Microscopy Sciences PremaDisk Diamond Grinding Disc SH Hard Bond, 6 µm Particles, 200 mm diameter
PremaDisk Flexible Diamond Grinding Discs offer superior surface finishes that are usually only seen in lapping processes.
The SM disc is a medium-hard resin bond base for fine grinding and polishing of metals, ceramics and glass.
The SH disc is a hard resin bond base for applications where a very sharp edge must be maintained on the workpiece.
Both discs increase productivity by combining optimum surface quality, removal rates, and tool life in the same process.
Particles: 6 µm
Diameter: 200 mm
Electron Microscopy Sciences PremaDisk Diamond Grinding Disc SM Medium-Hard Bond, 6 µm Particles, 350 mm diameter
PremaDisk Flexible Diamond Grinding Discs offer superior surface finishes that are usually only seen in lapping processes.
The SM disc is a medium-hard resin bond base for fine grinding and polishing of metals, ceramics and glass.
The SH disc is a hard resin bond base for applications where a very sharp edge must be maintained on the workpiece.
Both discs increase productivity by combining optimum surface quality, removal rates, and tool life in the same process.
Particles: 6 µm
Diameter: 350 mm
Electron Microscopy Sciences PremaDisk Diamond Grinding Disc SM Medium-Hard Bond, 6 µm Particles, 300 mm diameter
PremaDisk Flexible Diamond Grinding Discs offer superior surface finishes that are usually only seen in lapping processes.
The SM disc is a medium-hard resin bond base for fine grinding and polishing of metals, ceramics and glass.
The SH disc is a hard resin bond base for applications where a very sharp edge must be maintained on the workpiece.
Both discs increase productivity by combining optimum surface quality, removal rates, and tool life in the same process.
Particles: 6 µm
Diameter: 300 mm
Electron Microscopy Sciences PremaDisk S-SiC Grinding Disc P120, 250 mm diameter, 120µm Particles
Grinding disks made with silicon carbide grains with a 60 percent SiC concentration that is hard resin bonded. The disc can be used in wet or dry applications and have a consistent stock removal rate. They are designed with a flat grain curve that will not flatten after a few applications. They are a good alternative to SiC abrasive paper and SiC grinding foils (films), lasting 50-100 times longer.
Grinding disks come with self-adhesive backing. The discs have a thickness of 0.4 mm.
Diameter: 250 mm
Particles: 120µm
Electron Microscopy Sciences Disc Gripper for AFM, 10 mm
Use these unique grippers to easily pick up AFM/STM discs from a flat surface. Features a protective rubber-coated tip. Available in 4 sizes.
Size: 10 mm
Electron Microscopy Sciences Disc Gripper for AFM, 20 mm
Use these unique grippers to easily pick up AFM/STM discs from a flat surface. Features a protective rubber-coated tip. Available in 4 sizes.
Size: 20 mm
Electron Microscopy Sciences Magnetic Disc Storage Box for AFM, Large
Store AFM/STM discs in a dust-free environment with these storage boxes. Feature a magnet base to hold the magnetic stainless steel AFM discs and magnetic AFM sample holders. They are made of polystyrene with hinged lids. Perfect for storing, archiving and transporting AFM discs. Carrier only - Discs not included.
Size: Large
Electron Microscopy Sciences Disc Gripper for AFM, 15 mm
Use these unique grippers to easily pick up AFM/STM discs from a flat surface. Features a protective rubber-coated tip. Available in 4 sizes.
Size: 15 mm
Electron Microscopy Sciences SEM Stub with 75 mm Head and Pin 12.5 mm
A larger SEM aluminum sample holder for larger samples.
Height: 12.5 mm
Electron Microscopy Sciences NIGHTSEA™ Keyence VHX Fluorescence Adapter Best Value UV + VI + RB Full System
The NIGHTSEA Model SFA Fluorescence Adapter system adds a versatile fluorescence imaging capability to the Keyence VHX series of digital microscopes. The system is being used successfully by a growing number of Keyence owners for a variety of applications.
Color: UV + VI + RB
Electron Microscopy Sciences PremaDisk S-EC Diamond Grinding Disc, 250 mm diameter, 6µm Particles
These new universal grinding pads for all magnetic systems will replace 200-300 SiC paper discs saving you not only preparation time, but also money. The very high stock removal rate results in fast and clean mounting. Thickness of 0.2 mm with a non-erosion backing. Only water coolant is needed. Replacement for Piano, Cameo, Galaxy, and Apex DGD.
Diameter: 250 mm
Particles: 6µm
Electron Microscopy Sciences Polishing Disc Tin Resin, 12", Metal backing
Premadisk Opto Series composite polishing discs.
Diameter: 12"
Backing: Metal
Electron Microscopy Sciences PremaDisk S-EC Diamond Grinding Disc, 300 mm diameter, 6µm Particles
These new universal grinding pads for all magnetic systems will replace 200-300 SiC paper discs saving you not only preparation time, but also money. The very high stock removal rate results in fast and clean mounting. Thickness of 0.2 mm with a non-erosion backing. Only water coolant is needed. Replacement for Piano, Cameo, Galaxy, and Apex DGD.
Diameter: 300 mm
Particles: 6µm