Microscope Accessories and Replacement Parts
General accessories and parts for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Electron Microscopy Sciences PremaDisk Diamond Grinding Disc SM Medium-Hard Bond, 60 µm Particles, 350 mm diameter
PremaDisk Flexible Diamond Grinding Discs offer superior surface finishes that are usually only seen in lapping processes.
The SM disc is a medium-hard resin bond base for fine grinding and polishing of metals, ceramics and glass.
The SH disc is a hard resin bond base for applications where a very sharp edge must be maintained on the workpiece.
Both discs increase productivity by combining optimum surface quality, removal rates, and tool life in the same process.
Particles: 60 µm
Diameter: 350 mm
Electron Microscopy Sciences PremaDisk Diamond Grinding Disc SM Medium-Hard Bond, 30 µm Particles, 200 mm diameter
PremaDisk Flexible Diamond Grinding Discs offer superior surface finishes that are usually only seen in lapping processes.
The SM disc is a medium-hard resin bond base for fine grinding and polishing of metals, ceramics and glass.
The SH disc is a hard resin bond base for applications where a very sharp edge must be maintained on the workpiece.
Both discs increase productivity by combining optimum surface quality, removal rates, and tool life in the same process.
Particles: 30 µm
Diameter: 200 mm
Electron Microscopy Sciences Platinum Wire, 0.20 mm, Purity 99.95% 10 FT
High purity, vacuum grade. These metal wires are suitable for scanning and electron microscopy techniques.
Size: 0.20 mm
Purity: 99.95%
Electron Microscopy Sciences EMS Platinum Aperture with 10 µm hole, 0.24 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 10 µm
O.D.: 3 mm
Thickness: 0.24 mm
Electron Microscopy Sciences SEM Sample Holder Amray Base Universal Holder With Pin B
Our scanning electron microscope specimen holders are designed to improve your productivity and allow you to view more than one sample at a time. You will save pump down time, keep your chamber cleaner and get more work done. All mounts are machined from solid aluminum and come with spring clips/or setscrews to hold your specimens securely. All mounts are made to fit onto your stage and are designed to fit through all standard specimen exchange ports, and have a center-threaded port to accept the Adapter Pins.
All adapters have a threaded portion 5 mm in length. Holds any sample from 3mm to 29mm. Four removable arms. Easy sample insert and removal. Made from aluminum. Base measures: 48mm x42mm x12mm thick. Pin overall measures: 28mm x 6mm dia
Electron Microscopy Sciences PremaDisk Diamond Grinding Disc SH Hard Bond, 30 µm Particles, 250 mm diameter
PremaDisk Flexible Diamond Grinding Discs offer superior surface finishes that are usually only seen in lapping processes.
The SM disc is a medium-hard resin bond base for fine grinding and polishing of metals, ceramics and glass.
The SH disc is a hard resin bond base for applications where a very sharp edge must be maintained on the workpiece.
Both discs increase productivity by combining optimum surface quality, removal rates, and tool life in the same process.
Particles: 30 µm
Diameter: 250 mm
W Nuhsbaum Inc 12V100W HALOG.MICROSCOPE BULB
This item has a minimum qty of 3 per supplier requirements.
12V100W HALOG.MICROSCOPE BULB
Electron Microscopy Sciences Cold Mount TransFix Epoxy Resin
570 g powder; 500 ml liquid. Lowest shrinkage of cold mounting resins. Curing time is long, excellent adhesion to most materials. Used for vacuum impregnation. Hardened epoxy is duroplastic and not affected by moderate heat or chemicals.
Color: Colorless, clear cured under pressure, otherwise semi-transparent
Curing time: 20 minutes
Hardness: 83 Shore D
Use: Vias Microvias
Shrinkage: 3
Electron Microscopy Sciences Miller Squares Graticle NE57, 23 mm, 9:1 Large to small square
The ratio of large to small squares is 9:1. Originally designed for hematology, they can be utilized for rapid counting of any evenly spread field of particle. References: American J. of Clin. Pathol. Vol.20, 1950, page 1079. "Time Saving Device For Counting Reticulocyte." G.Brescher and Schneiderman. Practicle Haemotology – J.D. Dacy. Published by J.A. Churchill. 2nd Edition 1956 page 25.
Size: 23 mm
Divisions: 9:1 Large to small square
Surface: Glass sandwich
Research Products International Corp Mount-Quick Mounting Media, 30 ml
Use Mount-Quick to preserve and protect laboratory specimens. Simple to use - apply thin coating to microscope slide and place coverslip over specimen. Mount-quick dries quickly and is ready for screening in minutes. Final preparation remains stable for a long period of time. Mount-Quick flows easily and eliminates trapping of air bubbles. Packaged in a convenient dispenser tube containing 30ml of media. Tube eliminates unnecessary transferring of media, only amount required is used. Mount-Quick can be removed with xylene if desired.
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/1 nm thick on Square 300 mesh Copper Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Copper
Electron Microscopy Sciences C-Flat™ Holey Carbon Grid CF-1.2/1.3-2C, 200 mesh Cu
C-flat is an ultra-flat, holey carbon-coated support grid for transmission electron microscopy (TEM). Unlike competing holey carbon films, C-flat is manufactured without plastics, so it is clean upon arrival and the user has no residue to contend with. Made with patent pending technology, C-flat provides an ultra-flat surface that results in better particle dispersion and more uniform ice thickness.
Patterning is done using deep-UV projection lithography, ensuring the most accurate and consistent hole shapes and sizes down to submicron features. The precise methods by which C-flat is manufactured elminate artifacts such as excess carbon and edges around holes.
C-flat holey carbon grids provide the ideal specimen support to achieve high resolution data in making them an ideal choice for cryo single particle analysis, cryo tomography and automated TEM analysis. 1.2 µm holes with 1.3 µm spacing.
Mesh: 200
Material: Copper
Electron Microscopy Sciences Formvar/Carbon Support Film 25-50 nm/1 nm thick on 2X1 mm Slot Grid Gold Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is 25 to 50 nm thick with a 1 nm carbon coating.
Grid: Gold
World Precision Instrument Manual Stage for PZMIII
- Mounts in the circular opening in the PZMiii base.
- XY travel distance: 75x56mm
- Glass size: 116x96mm
- Active diameter: 37.6mm
- Dimensions: 180x155x27mm
- Fits 503102 base only
Electron Microscopy Sciences EMS Platinum Aperture with 100 µm hole, 0.06 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 100 µm
O.D.: 6.35 mm
Thickness: 0.06 mm