Glass Vacuum Manifolds
Glass Vacuum Manifolds
Chemglass Life Sciences Vacuum Manifold, Right Handed, 4 Ports, 4mm PTFE Stopcock
Vacuum Manifold, Right Handed, 4 Ports, 4mm PTFE Stopcock.
Chemglass Life Sciences 4-Port Airfree Schlenk Inert Gas Vacuum Manifold, Double Bank, 510mm OAL
4-Port Airfree Schlenk Inert Gas Vacuum Manifold, Double Bank, 510mm OAL. Double bank manifold available in 3, 4 or 5 port configuration. Forward facing 0-8mm Chem-Vac™ Chem-Cap valves permit easy operation of manifold inside of a fume hood. Main ports are spaced 100mm center to center with an additional 2 ports on the upper bank that can be used for gauging or sealed with AF-0210 stoppers. All connection ports are #15 o-ring joint connections that incorporate a greaseless o-ring seal. Manifold is modular in design allowing the user tremendous flexibility in performing experiments. Adapters from #15 o-ring joints to standard taper components, serrated hose connections or 3/8" Cajon fittings are available to allow the ports to be used with existing glassware. Replacement Chem-Vac™ Chem-Cap plug is listed below.
Chemglass Life Sciences 5-Port Vacuum Manifold, Right Handed Trap Assembly, Double Bank, Airfree, Schlenk
Line has 5-ports w/4mm high vacuum stopcocks having a 24/40 inner joints w/ hooks just above grind. Ports are spaced 150mm center to center & have rod bracing to vacuum bank. 40mm ID vacuum bank evacuates vessels up to 1000ml. End of vacuum bank has 35/25 ball joint & supplied w/socket joint cap style stopper. Valved gauging port is placed on main vacuum line & has a 12/5 ball joint. Inert gas line has 2-ports for connection of inert gas source & bubbler. End of inert gas line has a 14/20 inner joint & is supplied w/a joint cap style stopper. Pre-trap is 51mm OD x 250mm long w/ two 28/15 socket joints. Main trap body is 58 mm OD x 235mm long w/a reversed 75/50 ball & socket joint connection. A valved gauging port is placed between main & pre-trap. Spacing between the two traps is 175mm for easy placement of dewar flasks. OAD: 40" W x 24" H. Also supplied w/ two #28 S.S. pinch clamps, one #35 S.S. pinch clamp, one #75 S.S. pinch clamp, & two 1/2" S.S. springs.
Chemglass Life Sciences Vacuum Manifold, Right Handed, 3 Ports, 0-4mm Chem-Cap Valve, 240mm Overall width
Vacuum Manifold, Right Handed, 3 Ports, 0-4mm Chem-Cap Valve, 240mm Overall width. General purpose single bank vacuum manifold with 3 ports. Main tube is 38mm OD with a serrated hose connection, having the smallest serration 13.5mm and the largest serration 15.5mm, located at either the left or right side for vacuum connection. Ports are 0-4mm Chem-Vac Chem-Cap valves with serrated hose connections. The 0-4mm has the smallest serration 10mm and the largest serration 11mm. Ports are spaced 60mm center to center for the 0-4mm.
Ace Glass, Inc. Double tube vacuum manifold, 520mm long, (3) stopcock ports with #15 O-ring joints
520MM NO.15 3PRT MANIFOLD
Ace Glass, Inc. Double tube vacuum manifold, 730mm long, (4) stopcock ports with 14/20 inner joints
730MM 14/20 4PRT MANIFOLD
Ace Glass, Inc. Double tube vacuum manifold, 500mm long, (3) stopcock ports with 14/20 inner joints
500MM 14/20 3PRT MANIFOLD
Ace Glass, Inc. Double tube vacuum manifold, 730mm long, (4) stopcock ports with 24/40 inner joints
730MM 24/40 4PRT MANIFOLD
Chemglass Life Sciences 3-Port Airfree Schlenk Inert Gas Vacuum Manifold, Double Bank, Souza, 400mm OAL
3-Port Airfree Schlenk Inert Gas Vacuum Manifold, Double Bank, Souza, 400mm OAL. Unique design, double bank manifold with the valves sealed in a vertical position. This design permits the user an unobstructed view of whether the valve is in the open or closed position while also exposing the PTFE valves to less outgassing (when the front bank of the manifold is used for inert gas). The main ports are spaced 100mm center to center. All connection ports are #15 o-ring connections that incorporate a greaseless o-ring seal. Manifold is modular in design allowing the user tremendous flexibility in performing experiments. Adapters from #15 o-ring joints to standard taper components, serrated hose connections or 3/8" Cajon fittings are available to allow the ports to be used with existing glassware. Replacement Chem-Vac™ Chem-Cap plug is listed below.
Ace Glass, Inc. Manifold, air sampling, #25 Ace-Thred ends, 12inch length, (1)#7 Ace-Thred port
Manifold, air sampling, #25 Ace-Thred ends, 12inch length, (1)#7 Ace-Thred port
Ace Glass, Inc. Manifold, air sampling, #50 Ace-Thred to 2inch tube end, 36inchlength, (6) #7 Ace-Thred ports
Manifold, air sampling, #50 Ace-Thred to 2inch tube end, 36inchlength, (6) #7 Ace-Thred ports
Ace Glass, Inc. Manifold, air sampling, #50 Ace-Thred to 2inch tube end, 48inchlength, (2) #7 Ace-Thred ports
Manifold, air sampling, #50 Ace-Thred to 2inch tube end, 48inchlength, (2) #7 Ace-Thred ports
Ace Glass, Inc. Manifold, air sampling, #50 Ace-Thred to 2inch tube end, 48inch length, (10) #7 Ace-Thred ports
Manifold, air sampling, #50 Ace-Thred to 2inch tube end, 48inch length, (10) #7 Ace-Thred ports
Ace Glass, Inc. Manifold, air sampling, #25 Ace-Thred to 1inch tube end, 36inchlength, (2) #7 Ace-Thred ports
Manifold, air sampling, #25 Ace-Thred to 1inch tube end, 36inchlength, (2) #7 Ace-Thred ports
Ace Glass, Inc. Vacuum manifold, 405mm long, (4) stopcock ports with 14/20inner joints
405mm long, single tube vacuum manifold featuring 4 stopcock ports with 14/20 inner joints. Distance between ports is 95mm which allows for use of flasks up to 3L.