Clamps
Adjustable devices designed to securely hold two objects together or to hold an object in place; used with standard-taper and ball-and-socket joints, glass and tubing assemblies, and with ring stands. Available as plastic joint clips, stainless steel pinch clamps, and taper clips.
A laboratory clamp is an essential piece of equipment used to support and secure labware and other laboratory apparatus such as flasks, reaction vessels, tubing, thermometers, probes, columns, funnels, and overhead stirrers.
Some laboratory clamps consist of a shaft and boss head, secured with hand-tightened thumbscrews, knurled nuts, or wingnuts onto a supporting rod, stand or scaffold. They may also include two- or three-pronged, adjustable closing jaws designed for gripping objects safely and securely.
Laboratory clamps are constructed of metals such as stainless steel, nickel-plated zinc, plated brass or diecast aluminum alloy for enhanced chemical, heat, and corrosion resistance. However, some components such as the adjusting screws may be made of plastic, and the prongs may also be lined or covered with cork, plastic, glass-fiber, or rubber for enhanced grip with minimal damage or breakage.
Laboratory Clamp Styles and Designs
• Universal, general-purpose clamps that are fully adjustable for accommodating and securing a wide range of items of different sizes such as columns and thermometers
• Retort clamps for securing round-bottom flasks and similar glassware
• Fork clamps for securing and supporting cone-and-socket ground glassware joints
• Three-prong extension clamps, sometimes available with spring-loaded jaws, for holding irregularly shaped or outsized objects
• Specialized clamps for securing burettes and condensers or reaction vessels
• Chain clamps, which incorporate a circular, adjustable chain loop to hold cylinders and beakers
World Precision Instrument Replacement Side Clamp
Standard Probe Holders include an 11mm square acrylic block connected to our standard 19.5cm standard shaft (6mm diameter) with grooves spaced 1 mm apart. The grooves (on three sides) facilitate loading of probes.
The Standard Probe Holder-Corner Clamp (505249) holds shafts from 0.2 to 2.0 mm. The Standard Probe Holder - Side Clamp (505250) holds probes from 0.2 to 4.5 mm, as does the Electrode Holder, 'C' Clamp (505252). The "C" clamp is also useful to release implanted probes.
The Standard Probe Holder-Corner Clamp (505249) is included with each WPI Rat Stereotaxic Instruments has an 19.5cm shaft with 11mm square acrylic block.
Grainger Fork End 304 SS Cable Size 7/32
The LOOS Fork End 7/32 in Cable Size is a fork end cable terminal made of drop forged steel with a zinc finish. It has a 7/32 inch cable hole size and is rated up to 1 ton working load limit. This fork end can be used for making eye splices and attachments. It measures 1-1/4 inches long x 1 inch wide x 3/8 inches high. The fork end accepts 7x19 and 7x7 cable constructions. It is manufactured in the USA by Loos & Co. and sold individually.
Ace Glass, Inc. Lab jaws support plate, aluminum, 152mm(6in) diameter, Troemner916206
Lab jaws support plate, aluminum, 152mm(6in) diameter, Troemner916206
Biodesign Inc of Ny Dialysis Tubing closure clamps, for dialysis tubing up to 21 mm wet diameter, plastic, doubled bar sealing for highly assured closure, re-usable for hundred of times, 10 per pack
Dialysis Tubing closure clamps, for dialysis tubing up to 21mm wet diameter, plastic, doubled bars for highly assured closure, re-usable hundred of times, 10 per pack
AVANTOR MASTERFLEX (VWR LLC) ADAPTER KYNAR 1/2IN NPT F
Masterflex Fitting, PVDF, Straight, Sanitary Clamp to Threaded Adapter, 3/4IN Mini to 1/2IN NPT(F), Avantor
AVANTOR MASTERFLEX (VWR LLC) ADAPTER KYNAR 1/2IN NPT M
Masterflex Fitting, PVDF, Straight, Sanitary Clamp to Thread Adapter, 3/4IN Mini to 1/2IN NPT(M), Avantor
AVANTOR MASTERFLEX (VWR LLC) FITTING PVDF BODY FEMALE LUERL
NC2302178 FITTING PVDF BODY FEMALE LUERL
