Dissection Brushes
World Precision Instrument Pump-to-pump Network Cable, 25 ft
The RS-232 Network Cable allows networking of two or more pumps or other devices to a single computer with a quick and simple setup.
World Precision Instrument Microelectrode Holder (MPH6P)-MPH6P15
For use with these WPI Products: Piconozzle Kit (5430-XX)
All holders are supplied for standard WPI single capillary tubing of 1.0, 1.2, 1.5 and 2.0 mm outside diameters. Please specify diameter of glass you are using when placing your order.
World Precision Instrument Micro Nitric Oxide Sensors-ISO-NOP3005
The ISO-NOP007 has a tip diameter of just 7 microns and a length of 2mm. The response is linear over a wide dynamic concentration range of NO. The design is based on a single carbon fiber coated with WPI's NO-selective membrane. A detection limit of approximately 1 nM NO makes this electrode ideal for use in tissues and microvessels.
World Precision Instrument Pump-to-pump reciprocating cable
Connect two AL1000 pumps for the reciprocating option.
World Precision Instrument Miniature Micropositioner - Three Axes-MM3-ALL
The MM1 single stage measures only 5 x 11 x 26 mm with 3 mm travel. It provides precise and smooth motion with no backlash, positive spring loaded carriage, straight within 1 micron and less than 1 micron maximum wobble. It features fine 80 TPI screw adjustment. The 10 mm square mounting surface has a 3.9 mm tapped center hole for transmission and/or mounting. X-Y-Z axis configuration. Available in single X (MM1), X-Y, X-Y-Z (MM1-3) axis configurations. The unit may be purchased with an optional magnetic base (MM1-ALL or MM3-ALL.
World Precision Instrument Microelectrode Holder (MEH900R)-MEH900R10
For use with these WPI Products: SYS-900A
All holders are supplied for standard WPI single capillary tubing of 1.0, 1.2, 1.5 and 2.0 mm outside diameters. Please specify diameter of glass you are using when placing your order.
World Precision Instrument Randall Selitto Paw Pressure Meter, 800g
Get instantaneous, live readings
The Randall Selitto Paw Pressure Meter for analgesia testing is digitally controlled. Use the handheld instrument to apply force to an animal’s extremity and get instantaneous, live readings. You can even view the last maximum force applied during the test. The new limit indicator lets you select the maximum force limit, and then indicates with a warning light when the system reaches that limit. This unit comes with an acrylic stand to allow for easy viewing of the display. Stand and sling are sold separately.
World Precision Instrument Euthanex Lid Gaskets-EZ-20028G
The gaskets seal and reduce noise levels when putting lid on cage. Gaskets are easy to remove and replace. Includes five replacement gaskets and adhesive strips for mounting.
World Precision Instrument Stand Alone Vaporizer Unit With Male and Female Connectors
Vaporizer for precise blend of oxygen and isoflurane
The vaporizer is a precision instrument that blends incoming oxygen with liquid isoflurane and outputs anesthetic gas at the set oxygen to isoflurane ratio. The dial setting allows fine gradations for precise isoflurane concentration. The vaporizer is available in three configurations that incorporate output to an anesthesia system or as a stand-alone unit. The Classic Anesthesia System (EZ-7000) and the Single Animal Anesthesia System (EZ-B800) are also available without a vaporizer, allowing you to incorporate your own unit.
World Precision Instrument Isolated Differential Amplifier with active probe
The ISO-80 provides low noise AC coupled amplification and offers excellent recording performance for monitoring extracellular nerve action potentials in vitro and in living animals. The ISO-80 is provided with a remote headstage (1 m cable) which incorporates an electrode impedance test function and a constant current stimulator. The constant current stimulator can be used for cell marking, stimulation or electrode cleaning. Typical applications include measuring EMG, EEG, extracellular and action potentials in vitro or in vivo. The ISO-80 system is DC isolated from the subject ground and employs state of the art electro-magnetic shielding for improved noise rejection. The amplifier employs both high pass and low pass filtering with gain from 100 to 10,000. The lowest low-pass setting is 5 Hz and the upper passband is 10 kHz.
To learn more about our warranty options, click here.
World Precision Instrument Sensor, 70-160G
The tail cuff sensor has the ability to detect mouse/rat tail cuff blood pressure via the tail photoelectrically. All the sensors are nonmagnetic, and extremely sensitive in detecting pulses with the use of the II-MRBP systems.
World Precision Instrument Plantar Test Analgesia Meter, non heated
This unit, which is designed for testing narcotics and strong non-narcotic drugs, offers both Plantar (Hargreaves Method) and Tail Flick testing with a single unit. Either testing system is also available individually.
II-390G : In plantar mode, the visible light/heat source is directed at the paw or other desired body part, and in tail flick mode it is directed at the subjects’ tails. Test up to 12 mice or 6 rats simultaneously.
World Precision Instrument Electronic von Frey Anesthesiometer, Rigid & 15 Supertips, 800g
Assessing mechanical allodynia with 15 SuperTips
To assess mechanical allodynia, which is a painful response to a light touch or pressure from a stimulus that is not normally painful, the Electronic von Frey Anesthesiometer was developed. The Electronic von Frey meter uses one of 15 different flexible von Frey hairs called “SuperTips™” (or rigid tips up to 800 grams). Each hair, regardless of model chosen, is exactly 0.8mm in diameter. This uniformity of design eliminates false readings and allows for comparison of test results. The Electronic von Frey can be used with chart recorders and analog/digital converters, and it never needs calibrated. This system includes either a 90, 800 or 1,000 gram probe. Mesh stands are available in a variety of sizes for large group studies.
World Precision Instrument Euthanex Lids-EZ-20032
The Euthanex Lid system has become an industry standard. Simply by removing the water bottle from the wire bar cage cover and placing the Euthanex Lid over the host cage, you are ready to perform euthanasia. You no longer need to transfer animals. The lids are available in five sizes to accommodate virtually all plastic cage sizes designed for small lab animals. These heavy duty stainless steel lids have a stem fitting for connection to the quick-disconnect fitting on the regulator hose from the regulator. A foam lid gasket ensures a good seal on the cage. Multiple lids may be used to treat several cages at once.