Datalogger Accessories
Accessories and replacement parts designed for processing data from data logging devices. Products include software, power supplies and batteries, USB docking stations, temperature probes and sensors, interface cables, and alarm systems.
Data logger accessories include items used to enhance the capabilities of the devices or replacement sensors and other parts. Although most data loggers come complete with any necessary parts and software, accessories and replacement parts are often also available.
Data logger accessories may include data processing and statistical software, power supplies or batteries, new or replacement probes or sensors, interface cables, alarm systems, and other products that enhance the usability of the data logger.
Electron Microscopy Sciences Replacement Needle for Probe #4
Replacement probe tip for needle probe. Made of hardened and nickel plated tool steel with a sharp tip.
Perkin Elmer US LLC Quartz Parallel Plate Probes for DMA 7/DMA 7e and TMA 7, 3 mm diameter flat tip
PerkinElmer's quartz probes are manufactured to extremely high tolerances to ensure you obtain the most accurate data from your instrument.
STEMCELL Technologies EasySep Direct HLA Crossmatch T Cell Isolation Kit for RoboSep, For processing: 100 mL whole blood processed
The EasySep Direct HLA Crossmatch T Cell Isolation Kit can be used to isolate highly purified T cells directly from human whole blood spleen or lymph nodes by immunomagnetic negative selection. This kit targets non-T cells for removal with antibodies recognizing specific surface markers. Unwanted cells are labeled with antibodies and EasySep Direct RapidSpheres and separated using an EasySep magnet. Desired cells are simply collected into a new tube and are immediately available for downstream applications such as flow cytometry crossmatch.
Chemglass Life Sciences 10' Coiled Extension Cord, White, RTD
10' Coiled Extension Cord, White, RTD. For use with CG-1978-P Series RTD sensors. An adapter having a female Lemo connector to the 2-blade mini plug is available to allow use of the “Style B” sensors with equipment having this connection, CG-3499-A-20
Chemglass Life Sciences PT100 Sensor, Constructed with Shielded Cable, the Lemo Connector Provides an Area for a Ground Connection, PFA Coated, 1/4" OD x 22" Long, Style "B"
PT100 Sensor, Constructed with Shielded Cable, the Lemo Connector Provides an Area for a Ground Connection, PFA Coated, 1/4" OD x 22" Long, Style "B". PT100 RTD temperature sensor is for direct insertion into flasks and process reactors using any O-Ring style compression adapter, such as the CG-1042-E. Probes are constructed using shielded cable to ensure a clean signal. Style ¿B¿ has a Lemo Connector direct wired to a 12 foot lead and is for use with all Huber circulators permitting process temperature control based on the contents of the reactor. Sensor is constructed using GREEN shielded wire/cable. Lemo connector can be used as a ground for the probe using an optional grounding clip and wire. An adapter having a female Lemo connector to the 2-blade mini plug is available to allow use of the ¿Style B¿ sensors with equipment having this connection.
Electron Microscopy Sciences Alpha/Numeric Index Grid, Nickel
By employing a rectangular mesh, the support value of the grid has been increased, offering a value intermediate between the most commonly used grid (200 Lines) and (300 Lines). Each grid rectangle is asymmetrical having different outlines in all four corners. This allows for the orientation of the grid to be determined at microscopic levels. The index feature enables the position of each grid to be identified with reference to the letters A-O along the horizontal axis and the numbers 1-15 along the vertical axis. The logo in the rim allows for precise orientation and aids in the identification of each side.
Material: Nickel
Petroleum Analyzer Corporation Temperature sensor with plug / Pt100 / Class A / Metal / to 400°C
Temperature sensor with plug / Pt100 / Class A / Metal / to 400°C
Electron Microscopy Sciences Mirror Stereo Viewer
For viewing 4"x5" stereo pairs. Magnifier can be replaced. Base line spacing: 260mm, magnification: 1.8X, field of view without magnifier: 260x200mm, field of view with magnifier: 210x150mm, maximum size set up: 713x2.
Pendotech Cable Adapter For -W Pressure Sensors
Adapter cable from - W pressure sensors to traditional connector
Chemglass Life Sciences Pt100 Temperature Probe, AISI 316 Ti Ø3mm
Pt100 Temperature Probe AISI 316 Ti diameter 3mm. For use with CG-1991-V ECODryBlock Systems / Dryblock Heaters.
Research Products International Corp Temp Monitor, Dual Sensor
Simultaneously displays internal and external temperature on a 3 3/16 x 2 1/2 inch LCD, large enough to be read across a room. Useful as an indoor/outdoor thermometer, in incubators or anywhere simultaneous internal and external readings are required. Has min/max temperature memory. Can be wall mounted or freestanding with easel back. Recall min/max readings over any time period or have it automatically reset itself every 24 hours. The outdoor sensor is mounted on a cord over 4 feet long.