Datalogger Accessories
Accessories and replacement parts designed for processing data from data logging devices. Products include software, power supplies and batteries, USB docking stations, temperature probes and sensors, interface cables, and alarm systems.
Data logger accessories include items used to enhance the capabilities of the devices or replacement sensors and other parts. Although most data loggers come complete with any necessary parts and software, accessories and replacement parts are often also available.
Data logger accessories may include data processing and statistical software, power supplies or batteries, new or replacement probes or sensors, interface cables, alarm systems, and other products that enhance the usability of the data logger.
Bellco Glass, Inc. 1.7in. Probe Holder,45mm
Probe adapters & compression fittings are designed using our standard 45 mm blue polypropylene open top caps and white silicone gaskets. A wide variety of fittings are available to allow pH and do monitoring via insertion of these probes into the sidearms of vessels. Bellco probe adapters are designed to allow introduction of threaded probes into vessels through 200 mm stainless steel headplate or a 45 mm vertical sidearm. 13.5 thread for pH & DO probes. MADE IN THE USA.
Ace Glass, Inc. Sensor, J, 1/8x12in, inconel sheath, 12 foot lead
Sensor, J, 1/8x12in, inconel sheath, 12 foot lead
Ace Glass, Inc. Sensor, J, 3.75mmx12in, PTFE sheath, 12 foot lead
Sensor, J, 3.75mmx12in, PTFE sheath, 12 foot lead
Bellco Glass, Inc. Probe Adapter, 2.5in.
316 l stainless steel probe adapter threaded. Not a thermowell. This is a fixed height probe holder for the Omni series headplates. Also requires bottom half of a 1/2" compression fitting A554-33 and A554-42 o-ring. PG 13.5 THREAD X 2.5" EXTENSION. MADE IN THE USA.
Grainger Flex Metal Conduit Steel Trd Sz 3/4in
The AFC Liquid Tight Flex Metal Conduit is a flexible metal conduit with a liquid tight PVC jacket. It is made of galvanized steel and has an operating temperature range of -20°F to 167°F. The conduit has a UL listed 360 degree ground and is watertight to protect wires. It comes in 10 foot lengths in trade sizes 3/8 inch to 4 inch. The conduit can be used for exposed runs connecting equipment in damp or wet locations. It is sunlight, oil, and chemical resistant. The conduit allows for a smaller bend radius than standard flexible conduit.
Cole-Parmer Fischer Technology 604-175 Probe for Inside measurements, 0 to 40 mils, FGABI1.3-150, for models Deltascope FMP10 & Dualscope
Accuracy: 0.5 m up to 50 m; < 1% above 50 m. Measuring method: Magnetic induction. Display: 240 x 160 pixels.
Optimize Technologies OPTI-LYNX™ Bayonet Connecter w/ 10-32 Female Port
All OPTI-LYNX™ hardware can be purchased in kits or separately as needed for your application. OPTI-LYNX™ hardware is precision machined to maintain the highest quality and strictest tolerances. Use an OPTI-LYNX™ in-line kit & an extra bayonet connector to switch quickly and easily between multiple detectors or flow paths. Simply terminate the column outlet line with a holder cap/tube and use extra bayonet connectors for each detector inlet line. Use with other OPTI-LYNX™ hardware and easily modify your OPTI-LYNX™ holder from a "Direct Connect" to an "In-Line" version.