Autoclave Bags, Wraps, and Sleeves
Temperature-tolerant, flexible containers used to hold waste or other items during autoclaving/sterilization. Available in multiple sizes and colors. May include a sterility indicator.
Autoclave bags are single-use, flexible bags designed to contain waste or other items during autoclaving/sterilization.
Autoclaving is a process that destroys microbes and other potentially infectious substances. The process is used to sterilize surgical instruments, labware, media, and other materials before use and to treat infectious waste before disposal.
Autoclaves and sterilizers reach and maintain a temperature of 121°C for at least 30 minutes and use saturated steam under a minimum pressure of 15 psi.
Autoclave bags are temperature tolerant and are typically made from:
- High-density polyethylene (HDPE)
- Polypropylene (PP)
- Polyamide
Some autoclave bags include a sterility indicator, such as printing that does not appear unless the successful autoclave conditions are met. They may be clear, translucent, red, or orange and may be imprinted with the biohazard symbol or have text printed in English, Spanish, or both.
You can find autoclave bags in multiple capacities, from less than one gallon to 44 gallons. They are also available in various thicknesses and from dimensions of 10 x 10 inches to as large as 37 x 48 inches.
Uline 3M832 6X10 POUCHTAPE PADS 1M/C
3M832 6X10 POUCHTAPE PADS 1M/CT Tape and Adhesives 1 000 sheets/carton
MTC Bio Autoclave Bags, 200/PK
This item has a minimum qty of 2 per supplier requirements.
Autoclave bags, 12.2x26" (31 x 66cm), red, biohazard, printed, marking area
Research Products International Corp Autoclave Bags, 30 x 34 Inches, 2 mil Thick, 100 per Package
Heat resistant bags designed for all autoclaving procedures. High density bags are stronger than regular polypropylene bags for sterilizing equipment and supplies. Bags allow full visibility of medical supplies and supplies. Supplied 100 per package.
Med Vet International Sterilization Pouch, 7 3/4" x 13", J0480C, 200-pack
Pre-formed pouches with self-adhering adhesive tape features one blue-tinted side for visualization of contents, with other side paper-backed. Will work with either steam autoclave or ethylene oxide gas sterilization.
Chemglass Life Sciences Autoclave Bag Holder, for use with CLS-1192-1224; 12" x 24" Bag
These epoxy-coated, wire-framed bag holders keep biohazard bags open and ready for use. Just place a biohazard bag into the sturdy wire holder and stretch the bag over the top ring to secure it in place. A separate hooked ring rests over the top to keep the bag in place. Circular shape keeps the bag wide open for easy access. Made from bright, biohazard orange colored epoxy-coated wire. Sold 1 per case. *Bag Not Included
Med Vet International Cold Sterilization Storage Tray, 6?W x 9 3/4?L x 4 1/2?H, J0369, Each
Three piece soaking and sterilization set is ideal for cold soaking instruments. The perforated tray can be lifted out of any solution. Stainless steel latches seal the tray. Can be autoclaved up to 300° F. Red fiberglass reinforced plastic. 6" W x 9 3/4 L x 4 1/2" H, Each