Spectroscopy
Glass Expansion PVC Pump Tube 2tag, 152mm spacing, 2.06mm ID, Purple/Purple (PKT 12)
PVC Pump Tube 2tag 2.06mm ID Purple/Purple (PKT 12).Tag Colors: Purple/PurpleID mm: 2.06Wall Thickness mm: 0.86OD mm: 3.78Overall Length: 455mm (152mm spacing between tags)Number of Tubes Per Pack: 12Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon R3603/R3607 or equivalent.Special Properties: Inexpensive all-around tubing for general laboratory applicationsChemical Compatibility: Excellent for aqueous solutions of the following acids and concentrations, up to 35% Nitric Acid, up to 37% Hydrochloric Acid, up to 25% Hydrofluoric Acid, up to 30% Hydrogen Peroxide.Limitations: Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion RF Coil Copper for PE Elan/NexION (WE021816, 8003-0559)
RF Coil Copper for PerkinElmer & Fluidigm ICP-MS. Compatible with PerkinElmer Elan 6000/6100 & 6100 DRC, NexION 300/350 & Fluidigm Helios CyTOF & CyTOF2 ICP-MS. The RF coil is susceptible to corrosion in the torch box, which eventually lowers the conductivity of the coil. The greater the corrosion, the larger amount of energy is needed to produce a plasma of the same power. Coils in a corroded condition, increases the stress applied to other components in the RF generating system, and can shorten the lifetime of your torch. Copper is used as the base material of most commercially available coils but different plating materials are available. Silver has the best conductance & gold the best corrosion resistance. For Gold 501907331, Silver 501907332.To install your coil and ensure proper alignment, we highly recommend our re-useable RF Coil Installation Tool Kit (501907333).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion TruFlo Sample Monitor 0.05ml/min
TruFlo Sample Monitor 0.05 mL/min. This TruFlo Sample Monitor provides a measurable flow range of 0-0.05 mL/min, a calibrated flow range is 0.001-0.05 mL/min, & has an internal volume of 0.033 mL. Made from quartz (low background for B and other elements in borosilicate glass) and PEEK, the TruFlo is an indispensable diagnostic tool providing continuous real-time sample flow measurement, sounds out-of-range alarm, stores 24 hours of data, is ideal for sample introduction by peristaltic pump or natural aspiration, & is suitable for all ICP-OES and ICP-MS instruments. Do you ever need to repeat the analysis of a sample due to a blocked nebulizer, worn peristaltic pump tubing, or incorrect pressure of the pump tubing clamp? With the digital display of the TruFlo Sample Monitor, you always know the actual rate of sample uptake to your nebulizer. For HF compatible models see 501907284, 501907285, and 501907286.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Viton Pump Tube 2tag, 127mm spacing, 1.14mm ID, Red/Red (PKT 12)
Viton Pump Tube 2tag, 127mm spacing, 1.14mm ID Red/Red (PKT 12).Tag Colors: Red/RedID mm: 1.14Wall Thickness mm: 0.90OD mm 2.94Overall Length: 175mm (127mm spacing between tags)Number of Tubes Per Pack: 12Physical Properties: Fluoropolymer elastomerSpecial Properties: Special tubing for concentrated acids and corrosive solventsMaterial: Made from Fluran HC F-5500-A or equivalent.Limitations: Limited service lifeGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Viton Pump Tube 2tag, 95mm spacing, 1.14mm ID, Red/Red (PKT 12)
Viton Pump Tube 2tag, 95mm spacing, 1.14mm ID Red/Red (PKT 12).Tag Colors: Red/RedID mm: 1.14Wall Thickness mm: 0.90OD mm 2.94Overall Length: 175mm (95mm spacing between tags)Number of Tubes Per Pack: 12Physical Properties: Fluoropolymer elastomerSpecial Properties: Special tubing for concentrated acids and corrosive solventsMaterial: Made from Fluran HC F-5500-A or equivalent.Limitations: Limited service lifeGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Chemplex Industries SAMPLE CUPS 42.9MM DIA. SGL OP
CHEMPLEX XRF SAMPLE CUPS, TRIMLESS(TM), 42.9 Dia., mm, Single open end SpectroSulfur(TM) Analyzer Sample Cups
Perkin Elmer US LLC AA Ultra Quiet Oil-Less Air Compressor, 115V/60Hz
Features and Benefits: Completely quiet oil-less operation Delivers clean and dry instrument grade air Water separator with 5 micron particle filter assures no liquid transfer Specialty coated cylinders and high temperature piston rings for long service life Durable air tank with automatic condensate drain, internal coating and 5 year warranty Low annual operating costs 2-year system warranty A complete compressed air station incorporating an outlet pressure regulator, tank and outlet pressure gauge, shut off ball valve, ASME safety valve, and pressure switch allowing for complete automatic operation Specifications: Output CFM: 4.2 CFM Output L: 120 L/min Max Pressure: 120 PSI Tank Size: 24 L Dimensions: 16 in x 16 in x 21 in
Perkin Elmer US LLC Type A3 MEINHARD Quartz Nebulizer for ELAN and NexION 300/350
MEINHARD™ Nebulizers are self-aspirating and not to be used with solutions containing hydrofluoric acid. Nebulizers require an end cap (N0680504) for use with Scott Spray Chambers.
Glass Expansion TruFlo Sample Monitor for HF
TruFlo Sample Monitor 0-4.0 mL/min for HF. This TruFlo Sample Monitor provides a measurable flow range of 0-4 mL/min, a calibrated flow range is 0.2-4.0 mL/min, & has an internal volume of 0.12 mL. The sample path is made from HF resistant materials. The TruFlo is an indispensable diagnostic tool providing continuous real-time sample flow measurement, sounds out-of-range alarm, stores 24 hours of data, is ideal for sample introduction by peristaltic pump or natural aspiration, & is suitable for all ICP-OES and ICP-MS instruments. Do you ever need to repeat the analysis of a sample due to a blocked nebulizer, worn peristaltic pump tubing, or incorrect pressure of the pump tubing clamp? With the digital display of the TruFlo Sample Monitor, you always know the actual rate of sample uptake to your nebulizer. For routine aqueous and non-HF compatible models see 501907281, 501907282, and 501907283.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Trident Internal Standard Kit
Trident Internal Standard Kit. In-line addition of internal standards & ionization buffers provides an efficient means of accurately & precisely dosing all of your samples without extra effort or the risk of error or contamination. Internal standardization (IS) is often used to compensate for physical & mass-space interferences in ICP spectrometry. It can also enhance short-term & long-term reproducibility. The Trident offers a more compact & efficient mixing chamber. Moreover, it is completely modular, so damaged or lost components sre easily replaced.Replacement parts include 60-808-1190, 60-808-1187, EZT-16-50T, UFT-EZT-16-50, EZT-16-50, EZT-16-25, NC1150995, KK711E.For the most recent design including ratchet connections use Glass Expansion’s Trident CT Internal Standard Kit (P/Ns NC2046960, 60-703-1179). For solutions containing HF use Trident IS Kit for HF P/N NC2046964, 60-808-1150.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion OpalMist DC Nebulizer 0.2mL/min, Includes NFT-050 UniFit Connector with 0.50mm ID x 1.3mm OD x 700mm long tubing (1 piece) and 70-803-0969 Gas Fitting with Ratchet Nebulizer connector
OpalMist DC Nebulizer 0.2mL/min, includes UniFit Connector with 0.50mm ID x 1.3mm OD x 700mm long tubing (1 pc) & DC Gas Fitting Type 11 with ratchet connector (1 pc). Compatible with Analytik Jena ICP-MS and Leeman.Optimum nebulizer gas flow rate is 1.0L/min & sample flow rate is 0.2mL/min. Recommended not to exceed optimum 0.2mL/min sample flow rate; however, lower gas & sample flow rates are OK. The backpressure should read ~40 psi at 1.0L/min gas flow rate. OpalMist is made from high purity PFA resulting in the lowest background & exceptional resistance to HF. Tolerates up to 15% TDS & 75um particulates.Replacement parts include P/Ns NC1625341 & 502703076.Recommended nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) & Eluo Nebulizer Cleaning Tool (P/N 501907353). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Shimadzu ICPE 9800, Silver Coil. To ensure correct installation, the Installation Kit 70-900-6100T is required. This is not included and must be ordered separately. It is re-useable so only needs to be ordered once.
RF Coil Silver for Shimadzu ICPE 9800 ICP-OES. Compatible with Shimadzu ICPE 9800 ICP-OES. The RF coil is susceptible to corrosion in the torch box, which eventually lowers the conductivity of the coil. The greater the corrosion, the larger amount of energy is needed to produce a plasma of the same power. Coils in a corroded condition, increases the stress applied to other components in the RF generating system, and can shorten the lifetime of your torch. Copper is used as the base material of most commercially available coils but different plating materials are available. Silver has the best conductance & gold the best corrosion resistance. For Copper 501907340, Gold 501907341.To install your coil and ensure proper alignment, we highly recommend our re-useable RF Coil Installation Tool Kit (501907343).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion DuraMist DC Nebulizer 0.4mL/min, Includes NFT-050 UniFit Connector with 0.50mm ID x 1.3mm OD x 700mm long tubing (1 piece) and 70-803-0969 Gas Fitting with Ratchet Nebulizer connector
DuraMist DC Nebulizer 0.4mL/min, includes UniFit Connector with 0.50mm ID x 1.3mm OD x 700mm long tubing (1 pc) and DC Gas Fitting Type 11 with ratchet connector (1 pc). Compatible with Analytik Jena ICP-MS and Leeman.Optimum nebulizer gas flow rate is 1.0L/min & sample flow rate is 0.4mL/min. Recommended not to exceed optimum 0.4mL/min sample flow rate; however, lower gas & sample flow rates are OK. The backpressure should read ~40 psi at 1.0L/min gas flow rate. DuraMist is an economical inert nebulizer for high-precision analysis & the highest tolerance to TDS, up to 30%. Made from PEEK, it tolerates up to 5% HF.Replacement parts include P/Ns NC1625341 and 502703076.Recommend nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) & Eluo Nebulizer Cleaning Tool (P/N 501907353). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion DuraMist Nebulizer 0.4mL/min, Includes NFT-16-50 UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 piece), EL-1 EzyLok Connector Kit, and 70-803-0911 Ratchet EzyLok Connector.
DuraMist U-Series Nebulizer 0.4mL/min, includes UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 pc) & EzyLok Connector (1 pc).Optimum nebulizer gas flow rate is 1.0L/min & sample flow rate is 0.4mL/min. Recommended not to exceed optimum 0.4mL/min sample flow rate; however, lower gas & sample flow rates are OK. The backpressure should read ~40 psi at 1.0L/min gas flow rate. DuraMist is an economical inert nebulizer for high-precision analysis & the highest tolerance to TDS, up to 30%. Made from PEEK, tolerates up to 5% HF.Replacement parts include P/N 502702959, EL-1 & 501907289.Recommend nebulizer maintenance tools, Fluka RBS25 (P/N NC9000117) & Eluo Nebulizer Cleaning Tool (P/N 501907353). When nebulizer is not in use, best to store in the provided hard plastic case.Consider upgrading to our new Direct Connect (DC) DuraMist to take advantage of the cost-effective design improvements.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Conikal U-Series Nebulizer 1mL/min (N8121058)
Conikal U-Series Nebulizer 1.0 mL/min, includes UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 pc.) and EzyLok Connector (1 pc.).Optimum nebulizer gas flow rate is 1.0L/min and sample flow rate is 1.0mL/min. Recommended not to exceed optimum 1.0mL/min sample flow rate; however, lower gas and sample flow rates are OK. The backpressure should read approximately 40psi at 1.0L/min gas flow rate. The Conikal nebulizer is a high-performance, general use glass nebulizer, that tolerates up to 5% TDS and 75um particulates. Replacement parts include P/Ns 502702959 and 502702994.Recommend nebulizer maintenance tools, Fluka RBS25 (P/N NC9000117) and Eluo Nebulizer Cleaning Tool (P/N NC9462559). When nebulizer is not in use, best to store in the provided hard plastic case.Consider upgrading to our new Direct Connect (DC) Conikal to take advantage of the cost-effective design improvements.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001