Hardness Testers
Cole-Parmer Phase-II PHT-960 Durometer, Shore A scale
Easily and accurately measure the hardness of rubbers and plastics. Simple to set up and use, and the lightweight, ergonomic design makes it ideal for taking precise and consistent measurements in the lab or out in the field.
Ptc Instruments DUROMETER SHORE A PTC 306L
- Type: Shore A Durometer
- Standard compliance: ASTM D2240, ISO 868
- Measurement range: 0 to 100 Shore A points
- Accuracy: ±1 point
- Display: Low-glare aluminum dial
- Feature: Max hold hand (peak reading retention)
- Construction: Heat-treated, high-carbon steel mainspring
- Calibration: Individually calibrated
- Mounting: 8-32 threaded top knob for test stand attachment
- Included accessories: Aluminum test block, sturdy carrying case
- Height: 4 in (10.2 cm)
- Width: 2.25 in (5.7 cm)
- Depth: 1.75 in (4.4 cm)
- Weight: 8 oz (227 g)
- Shipping weight: 3 lb (1.4 kg)
- Typical materials: Natural rubber, elastomers, fluor elastomer, neoprene, silicone, EPDM, Buna-N, latex, ECH, polyethylene, polyurethane, Viton, Santoprene, SBR, vinyl, butyl, soft plastics, felt, leather
Hach Company Hardness Indicator Solution, 0.3 mg/L, 500 mL
Hardness Indicator Solution for use with the SP510 Hardness Analyzer. 0.3 mg/L.
BERG ENGINEERING AND SALES COMPANY BH3000 BRINELL HARDNESS TESTE
- Test load type: Load cell closed-loop control system
- Hardness scales: HB
- Load range: 62.5 kgf - 3000 kgf
- Test loads: 62.5 kgf, 187.5 kgf, 250 kgf, 500 kgf, 750 kgf, 1000 kgf, 1500 kgf, 3000 kgf
- Brinell scales: HBW 10/3000, HBW 10/1500, HBW 10/1000, HBW 10/500, HBW 10/250, HBW 10/100, HBW 5/750, HBW 5/250, HBW 2.5/187.5, HBW 2.5/62.5
- Indenters: Brinell balls: 2.5 mm, 5 mm, 10 mm (optional)
- Load duration: 2 - 99 sec
- Specimen vertical accommodation: 11 in
- Specimen horizontal accommodation: 5 in from centerline
- Display type: LCD
- Hardness resolution: 0.1 unit if HB < 100; else 1.0 unit
- Standards compliant: ISO 6506, ASTM E10, JIS
- Test cycle: Automatic
- Power: 100 - 240 VAC, 60/50 Hz
- Approximate weight: 550 lbs
STRUERS INC EpoFix Resin, 1L
EpoFix is a slow-curing transparent epoxy, particularly suited for vacuum impregnation and mounting of very delicate specimens
Aqua Solutions Betz Hardness Indicator W/brass Dipper (500g)
Betz Hardness Indicator W/brass Dipper (500g)
Electron Microscopy Sciences PS25 Hardness Tester Calibration UKAS certificate
Reflected light calibration slide with diamond shapes and scales are used for for calibrating Vickers and Rockwell hardness testers. The PS25 has a series of diamond shapes of varying size and x-y scales, each clearly identified with its size. The glass disc has the image precision marked in vacuum deposited chrome and this is cemented into a stainless steel slide mount, making the calibration slide very durable.
The slide has a unique serial number indelibly marked on the slide mount and can be supplied with an Internationally traceable certificate of calibration. Supplied in a polished wooden box. With an Internationally traceable UKAS certificate of calibration.