Mills
Grainger Sq. End Mill Single End Carb 0.60mm
The Grainger Approved Square End Mill Single End is a high-speed steel end mill with a square end for milling slots, keyways, and pockets. It has a 1/2" shank diameter, a 1" cutting diameter, 2 flute design, and an overall length of 3". This end mill is uncoated and made in the USA. The square end allows milling of 90 degree shoulders and corners in one pass.
Sklar Instruments Needle Holder Sklar Microscopy Surgical 1/EA
Needle Holder Sklar Microscopy Surgical 1/EA
Fritsch Milling And Sizing Inc Gassing Lid with 2 Valves for 80 Ml Tungsten Carbide, Cl
Gassing lid 80 ml cl hardmetal tungsten carbide with steel casing with 2 valves and seal ring.
Through the use of this special lid (incl. seal ring) on a hardmetal tungsten carbide grinding bowl with 80 ml volume, the grinding bowl can be used for grinding with inert gas and for mechanical alloying.
Two valves allow for easy and safe filling of the bowls with inert gas, while they are firmly clamped in the mill. A special additional Lock-System is required for gas-tight removal and transportation: order no. 90.1400.00.
Gassing lids with Swagelok valves are available on request.
Grainger Cor Rad End Mill 1/16 Carb 0.0100 rad
The Micro 100 Corner Radius End Mill Carbide 14R972 is a high-performance end mill designed for machining corners and edges. It features a 0.125" corner radius and a 0.500" cutting diameter. The end mill has 4 flutes and is made of solid carbide for durability and long tool life. It can machine a variety of materials including steel, stainless steel, cast iron, aluminum, titanium and high-temp alloys. The 14R972 has AlTiN nano coating to resist heat and built-up edge. It is well-suited for 2D and 3D profiling, slotting, side milling, and contouring applications requiring sharp corners and edges.
Fritsch Milling And Sizing Inc Deep-Temperature Milling Device (Cryo-Box)
Device for grinding in liquid nitrogen
The grinding set is placed in a cryo-box to grind soft, oily, fatty or moist materials by adding liquid nitrogen to embrittle the grinding material. This method is used to reduce samples which are very difficult to grind (e. g. slivers of soft PVC) to analytical fineness. The thick insulation of the cryo-box keeps coolant costs low.
For cryogenic grinding, a mortar and a grinding ball made of stainless steel, hardened steel or hard metal tungsten carbide should be used.
Grainger Sq. End Mill Single End Carb 0.0090
The Grainger Approved Square End Mill Single End is a high-speed steel end mill with a square end for milling slots, keyways, and pockets. It has four flutes and a right-hand spiral. The overall length is 3 inches and the shank diameter is 0.25 inches. The mill diameter is 0.375 inches with a 0.125 inch depth of cut. This end mill is designed for use on steel, stainless steel, cast iron, aluminum, brass, bronze, and plastics. It can be run at speeds up to 2300 SFM.
Grainger Sq. End Mill Single End Carb 3/8
The Grainger Approved Square End Mill Single End is a high-speed steel end mill with a square end for milling slots, keyways, and pockets. It has four flutes and a right-hand spiral. The overall length is 3 inches and the shank diameter is 0.25 inches. This end mill is uncoated and made in the USA. The maximum RPM is 2700. It can be used on steel, stainless steel, cast iron, aluminum, brass, bronze, and plastics.
Grainger Sq. End Mill Single End Carb 9/16
The Grainger 14G021 is a Westward 3/8-inch drive deep impact socket set made in Taiwan. This 25-piece socket set includes sizes ranging from 4mm to 14mm, comes organized in a molded case, and is designed for use with impact wrenches. The sockets feature a black phosphate finish for corrosion resistance and laser etched size markings for easy identification.