Mills
Fritsch Milling And Sizing Inc Sieve Ring P-14 Cl Stainl. Steel 0.5 mm Trapezoidal Perf.
Sieve ring P-14 cl stainl. steel 0.5 mm trapezoidal perf.
Sieve rings determine the end fineness of the sample.
Sieve rings with trapezoidal perforations and sieve rings with round perforations are available.
Sieve rings with trapezoidal perforations improve size reduction through extra shearing action.
Sieve rings with round perforation are recommended for reduction of brittle and medium fine materials with a smaller grain band.
Sieve rings with reinforced edges for heavy duty size reduction are also offered.
Grainger Cor Rad End Mill 3/8 Carb 0.0100 rad
The Grainger 14T070 is a 14-inch diameter, 3-blade, aluminum propeller for small unmanned aerial vehicles (UAVs). It has a pitch of 5 inches and is designed for electric motors up to 400 Kv. The propeller is made from durable, lightweight 6061 aluminum alloy and uses a set screw hub attachment. With its efficient aerodynamic design, the 14T070 provides high static thrust for maximum payload capacity and flight endurance. The propeller comes unpainted so users can apply their own custom paint scheme. Overall, the 14T070 is an ideal upgrade propeller for small UAV platforms looking to improve thrust and efficiency.
Grainger End Mill Kyocera MEW 1500S1258154T 1.5
The Kyocera 170HK2 is a 2 flute, high speed steel end mill with a 1/2" shank diameter and 1-1/2" overall length. It has a 1/2" cutting diameter and can be run at speeds up to 325 SFM. This general purpose end mill is center cutting and right hand spiral. It's made in Japan from M2 high speed steel for good wear resistance. The 170HK2 end mill is well suited for slotting, side milling and contouring operations in most ferrous and non-ferrous metals.
Revvity Health Sciences Inc Bead Ruptor Elite 30 mL Tube Carriage & Finger Plate
Bead Ruptor Elite 30 mL Tube Carriage & Finger Plate
Laboratory Supply Network Inc TRIPLE PURE ZIRC BEAD 50/PK
triple pure zirconium bead kits, 1.5mm beads, pack of 50, 2.0ml tubes
Fritsch Milling And Sizing Inc Grinding Bowl 5 Ml Cpl. Ptfe, P-23
Grinding bowl 5 ml cpl. PTFE with lid and seal ring
Grinding bowl volume: 5 ml
Useful capacity: 0.1 … 1 ml
Weight net: 0.050 kg
This special grinding bowl in combination with a 10 mm steel grinding ball is primarily used to grind biological sample, like for example deep freeze tissue, cells, etc.. The entire bowl can be pre-cooled in liquid nitrogen. Afterwards the sample is subsequently comminuted in sub-zero temperature.
Grainger Sq. End Mill Single End Carb 9/64
The Micro 100 Square End Mill Center Cutting 14F944 is a square end milling cutter with a center cutting edge. It has a 1/4 inch shank diameter and a 1/2 inch cutting diameter. The overall length is 2 inches. This carbide end mill is designed for slotting, side milling and contour milling in steel, cast iron, aluminum and other non-ferrous metals. It features four flutes and a right-hand spiral. The center cutting edge allows plunge cuts. Made in the USA by Micro 100 Tool Corp.
ATCC U-CH1; Chordoma; Human (Homo sapiens)
U-CH1 is a mesenchymal like cell line that was isolated in 1998 from the sacrum of a 56-year-old, White male patient with chordoma. This cell line was established from a local recurrence of a sacrococcygeal after radiotherapy 4 years after initial surgery. Chordoma is a rare slow-growing tumor type, and U-CH1 is a relatively slow-growing cell line. U-CH1 has a heterogeneous morphology consisting of physaliferous cells with mucinous intercellular substance, which represent typical chordoma features. The cells overexpress the transcription factor T (Brachyury) that is the most specific marker for chordoma. This cell line was accessioned with the support of the Chordoma Foundation, a non-profit organization working to improve the lives of chordoma patients by accelerating research to develop effective treatments for the chordoma disease. This cell line was deposited by Silke Bruderlein and Peter Moller.
Chemplex Industries SPECTROMILL ADAPTERS
CHEMPLEX SpectroMill Adapters, Holds 5 SpectroVials,Cat.No.1121 or 1161
Grainger Ball End Mill Single End 12.00mm Carbide
The 14K814 is a 14-inch diameter, 8-inch wide, 4-blade aluminum propeller made by Sensenich. It has a pitch of 14 inches and is designed for experimental aircraft with engines from 65 to 85 horsepower. The propeller is constructed from 6061-T6 forged aluminum alloy for strength and durability. It uses Sensenich's proprietary blade shape for optimal performance. The propeller comes with all mounting hardware needed for installation. Overall, the 14K814 is a high quality aluminum propeller well-suited for experimental light aircraft with 65-85 hp engines.
Grainger Sq. End Mill Single End Carb 0.30mm
The Grainger Approved Square End Mill Single End is a high-speed steel end mill with a square end for milling slots, keyways, and pockets. It has four flutes and a right-hand spiral. The overall length is 3 inches and the shank diameter is 0.5 inches. The square end measures 0.25 inches across. This end mill is uncoated and made in the USA. It can machine low and medium carbon steels at surface speeds up to 120 SFM.