General Spectrometer Accessories
Med Vet International Dynarex Nasal Oxygen Cannula Flared Tip, 7' (2.1 M) Crush Resistant, Adult/Standard Connector, 50/Case
Dynarex Resp-O2 Nasal Oxygen Cannulas with Flared Tips are designed to efficiently deliver supplemental oxygen to respiratory patients. The cannulas are available with either Standard or Universal connectors and feature light green oxygen supply tubing, designed to help improve tube visibility. Flared-tip nasal prongs help ensure a secure fit Crush-resistant, star lumen oxygen supply tubing Individually wrapped Not made with natural rubber latex or DEHP
Glass Expansion MicroMist DC Nebulizer 0.2mL/min, Includes NFT-16-50 UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 piece), and 70-803-1049 Gas Fitting with Ratchet Nebulizer connector
MicroMist DC Nebulizer 0.2 mL/min, includes UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 pc.) and DC Gas Fitting Type 22 with ratchet connector (1 pc.). Compatible with Perkin Elmer Elan/NexION 300/350.Optimum nebulizer gas flow rate is 1.0L/min and sample flow rate is 0.2mL/min. Recommended not to exceed optimum 0.2mL/min sample flow rate; however, lower gas and sample flow rates are OK. The backpressure should read ~40 psi at 1.0L/min gas flow rate. Can tolerate up to 15% TDS. MicroMist is the standard configuration for many ICP manufacturers due to its excellent sensitivity and precision at low flow rates. Replacement parts include P/Ns 502702959 and 502703069.Recommend maintenance tools are Fluka RBS25 (P/N NC9000117) and Eluo Nebulizer Cleaning Tool (P/N NC9462559). When not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
New Jersey Fluid Systems LLC BRASS INTEGRAL BONNET NEEDLE V
NC3838755 BRASS INTEGRAL BONNET NEEDLE V
Perkin Elmer US LLC Photometric and Wavelength Accuracy Reference Materials Kit
The solutions in this secondary standards kit are shipped in a re-usable UV-protective storage container and come with Certificates of Calibration. This kit includes four glass filters mounted in precision aluminum spring mounts. The cells are designed for use with standard 10 mm cuvette holders. Three of the filters are neutral density glass filters for checking spectrometer ordinate accuracy. The fourth filter, holmium oxide, is for checking spectrum wavelength accuracy. These materials require periodic recertification. PerkinElmer offers recertification services (N1010539).
Glass Expansion Elegra Dual Channel Argon Humidifier
Elegra Dual Channel Argon Humidifier. Compatible with Agilent (Varian) Vista/7010-ES Series ICP-OES, 4100/4200 MP-AES, Leeman. This dual channel argon humidifier allows the nebulizer and auxiliary/make-up gas to be humidified. An argon humidifier is commonly used in ICP analyses involving samples with high concentrations of dissolved solids. It helps to alleviate salt deposits in the nebulizer & torch injector, allowing uninterrupted & maintenance-free operation. Compact, durable, cost-effective design with a non-pressurized water reservoir, & no heating or electric power required. Highly efficient membrane humidification technology that consistently maintains signal stability for samples with high TDS. Inert & metal-free eliminates possibility of contamination. Simple to use & maintain ensuring you are always operating under optimum conditions.Replacement Elegra Membrane, P/N 70-803-1286.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-900
Glass Expansion Tapered Quartz Injector 1.8mm
Quartz Tapered Injector with 1.8mm ID. A 1.8mm ID quartz tapered injector (14110500), suitable for use with aqueous and less volatile organic solvent-based matrices. Compatible with Horiba Jobin Yvon ICP-OES 24, 38 & 138 Series, Ultima, Activa PT2000 Fully Demountable Torch, which is obsolete. Not suitable for use with HF.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Viton Pump Tube 2tag, 127mm spacing, 2.54mm ID, Purple/Orange (PKT 12)
Viton Pump Tube 2tag, 127mm spacing, 2.54mm ID Purple/Orange (PKT 12).Tag Colors: Purple/OrangeID mm: 2.54Wall Thickness mm: 0.85OD mm 4.24Overall Length: 175mm (127mm spacing between tags)Number of Tubes Per Pack: 12Physical Properties: Fluoropolymer elastomerSpecial Properties: Special tubing for concentrated acids and corrosive solventsMaterial: Made from Fluran HC F-5500-A or equivalent.Limitations: Limited service lifeGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Perkin Elmer US LLC SC Autosampler Probe PTFE 0.8 mm I.D.
Probe with attached sample tubing, 2 probe clamps, 2 thumbscrews, 5 O-rings Probe Length: 10 inches (25.4 cm) Capillary Length: 108 (2.74 m) Probe Material: FEP-covered carbon fiber Capillary Material: PFA