General Spectrometer Accessories
Glass Expansion Elegra Argon Humidifier
Elegra Argon Humidifier. A universal kit for other ICP-OES/ICP-MS instruments. An argon humidifier is commonly used in ICP analyses involving samples with high concentrations of dissolved solids. It helps to alleviate salt deposits in the nebulizer & torch injector, allowing uninterrupted & maintenance-free operation. Compact, durable, cost-effective design with a non-pressurized water reservoir, & no heating or electric power required. An easy-to-use bypass switch allows you to take the Elegra off-line without disconnecting argon lines. Highly efficient membrane humidification technology that consistently maintains signal stability for samples with high TDS. Inert & metal-free eliminates possibility of contamination. Simple to use & maintain with maximum & minimum fill lines ensuring you are always operating under optimum conditions.Replacement Elegra Membrane, P/N 70-803-1286. Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-900
Glass Expansion Elegra Dual Channel Argon Humidifier
Elegra Dual Channel Argon Humidifier. Compatible with PerkinElmer NexION 1000/2000/5000 Series ICP-MS. This dual channel argon humidifier allows the nebulizer and auxiliary/make-up gas to be humidified. An argon humidifier is commonly used in ICP analyses involving samples with high concentrations of dissolved solids. It helps to alleviate salt deposits in the nebulizer & torch injector, allowing uninterrupted & maintenance-free operation. Compact, durable, cost-effective design with a non-pressurized water reservoir, & no heating or electric power required. Highly efficient membrane humidification technology that consistently maintains signal stability for samples with high TDS. Inert & metal-free eliminates possibility of contamination. Simple to use & maintain with maximum & minimum fill lines ensuring you are always operating under optimum conditions.Replacement Elegra Membrane, P/N 70-803-1286.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-900
Glass Expansion Viton Pump Tube 2tag, 95mm spacing, 1.42mm ID, Yellow/Yellow, 95mm between tags (PKT 12)
Viton Pump Tube 2tag, 95mm spacing, 1.42mm ID Yellow/Yellow (PKT 12).Tag Colors: Yellow/YellowID mm: 1.42Wall Thickness mm: 0.85OD mm 3.12Overall Length: 175mm (95mm spacing between tags)Number of Tubes Per Pack: 12Physical Properties: Fluoropolymer elastomerSpecial Properties: Special tubing for concentrated acids and corrosive solventsMaterial: Made from Fluran HC F-5500-A or equivalent.Limitations: Limited service lifeGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Waters Corp APCI Probe Adaptor Assembly, Mechanical, MS Systems
The APCI Probe Adaptor Assembly is a replacement part designed to facilitate the use of Tool Free Probes. This mechanical component is specifically used with MS (Mass Spectrometry) systems.
- Product type: Spare parts kits
- Units per package: 1 pk
- Type: Mechanical
- System type: MS
- Replacement schedule: As required
Premier Lab Supply Kapton 7.5μm (0.30mil) Sheets – PN# TF-475-345
Kapton film 7.5μm (0.30mil) Sheets with Dimensions: 3” x 3” (76 x 76mm) (PN# TF-475-345). Kapton has excellent chemical resistance and moderate transmission characteristics. Pure polymide film, is virtually free of trace contaminants. Lot number tracking system. 500 per box.
Glass Expansion Sapphire Capillary Injector 2.4mm compatible with 30-808-3853
Sapphire Capillary Injector with 2.4mm ID.2.4mm ID sapphire capillary injector (NC2046976, 31-808-4159). This sapphire capillary injector, with 2.4 mm I.D., is for use with Agilent 7700/7800/7900/8800/8900 ICP-MS instruments. Sapphire injectors are ideal for silicon and HF applications.Agilent 7700/7800/7900/8800/8900 ICP-MS Injectors - Compatible with Glass Expansion Semi Demountable Torch (SDT) Quartz Body NC2046979 (31-808-3857), SDT NC2046974 (30-808-3853), and SDT 30-808-4185. Optional injectors are Tapered Alumina Injector 2.4mm 50-190-7264 (31-808-3855) and Tapered Quartz Injector 2.4mm NC2046978 (31-808-4168). Injector adaptor for semi-demountable torch is 31-808-4129.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Tapered Alumina Injector 2.0mm
Tapered Alumina Injector with 2.0mm ID.2.0mm ID Tapered Alumina Injector. The most versatile and suitable for use with aqueous, including HF, and high TDS matrices. Compatible with Spectro Arcos II EOP D-Torch (30-808-3657).When replacing your injector, it is recommended to replace the injector ferrule (31-808-2962), on average every 6 months.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Nickel Sampler Cone, Version B, Dry Plasma (319-541)
Nickel Sampler Cone, Version B, Dry Plasma (319-541) For Nu Instruments Plasma2, Plasma3, Attom ES ICP-MS. Suitable for laser ablation applications. Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. When not in use, keep cones stored in original packaging for protection. Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Perkin Elmer US LLC PTFE-Coated Torch Cassette O-Ring, 2.57 mm I.D. for Avio 200/500
The O-ring is PTFE-coated, blue colored, has an inner diameter of 2.57 mm. Two of these o-rings are included in the Avio Adjustable Torch O-Ring Kit (N0790437)
Glass Expansion Solva Flex Pump Tube 3 tag, 95mm spacing, 0.51mm ID, Orange/Yellow, 95mm (PKT 12)
Solva Flex Pump Tube 3tag, 95mm spacing, 0.51mm ID Orange/Yellow (PKT 12).Tag Colors: Orange/YellowID mm: 0.51Wall Thickness mm: 0.86OD mm: 2.23Overall Length: 455mm (95mm spacing between tags)Number of Tubes Per Pack: 12Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon 4040 or equivalent.Special Properties: Special tubing for hydrocarbons, petroleum products and distillates.Chemical Compatibility: Ideal for gasoline, kerosene, heating oils, cutting liquids and coolants based on glycols.Limitations: Not recommended for strong acids and alkalis, foodstuffs, beverages and medicines. Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Solva Flex Pump Tube 2tag, 140mm spacing, 1.85mm ID, Green/Green (PKT 12)
Solva Flex Pump Tube 2tag, 140mm spacing, 1.85mm ID Green/Green (PKT 12).Tag Colors: Green/GreenID mm: 1.85Wall Thickness mm: 0.86OD mm: 3.57Overall Length: 455mm (140mm spacing between tags)Number of Tubes Per Pack: 12Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon 4040 or equivalent.Special Properties: Special tubing for hydrocarbons, petroleum products and distillates.Chemical Compatibility: Ideal for gasoline, kerosene, heating oils, cutting liquids and coolants based on glycols.Limitations: Not recommended for strong acids and alkalis, foodstuffs, beverages and medicines. Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Perkin Elmer US LLC Preassembled Sealed Liquid Cell - CaF2, 0.5 mm
Sealed liquid cells have a corrosion-resistant construction, making them ideal for highly volatile samples. Each cell has a precise path length which is calibrated using the interference pattern generated by an empty cell in the beam of a spectrometer. These cells are ideal for quantitative analysis where you require an accurate reproducible cell thickness. They use a lead spacer which is amalgamated to the window material. The resultant bond forms a good leak-free seal which is effective in preventing evaporation and loss of sample. You can fill or empty liquid samples easily. The sealed liquid cell is an integral unit and cannot be disassembled. Rugged construction Easy to fill and clean Leak-free operation Calibrated for quantitative analysis Usable on all PerkinElmer FT-IR spectrometers
Glass Expansion Quartz Torch with 2.0mm Injector for Agilent 7700/7800/7900/8800/8900
Quartz Torch, single-piece, 2.0 mm id injector, for routine aqueous analysis with Agilent 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS. Suitable for routine aqueous applications but not inert to samples containing hydrofluoric acid (HF).For volatile organic solvents, see catalog number 50-190-6995 or 50-190-6994.For samples containing HF see catalog number 30-808-4185.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Quartz Torch, High Solids, with Ball Joint and 1.8mm Injector for 700-ES or Vista Radial
Quartz Torch (High Solids), single-piece, with Ball Joint and 1.8 mm ID injector, for Agilent (Varian) 700-ES or Vista Radial Series ICP-OES (CP914870). Recommended for aqueous samples and less-volatile organic solvent analysis but not inert to samples containing hydrofluoric acid (HF).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Perkin Elmer US LLC Preassembled Sealed Liquid Cell - CaF2, 0.2 mm
Sealed liquid cells have a corrosion-resistant construction, making them ideal for highly volatile samples. Each cell has a precise path length which is calibrated using the interference pattern generated by an empty cell in the beam of a spectrometer. These cells are ideal for quantitative analysis where you require an accurate reproducible cell thickness. They use a lead spacer which is amalgamated to the window material. The resultant bond forms a good leak-free seal which is effective in preventing evaporation and loss of sample. You can fill or empty liquid samples easily. The sealed liquid cell is an integral unit and cannot be disassembled. Rugged construction Easy to fill and clean Leak-free operation Calibrated for quantitative analysis Usable on all PerkinElmer FT-IR spectrometers