Tissue Embedding
Buehler Release Agent, 4oz
This item has a minimum qty of 10 per supplier requirements.
Liquid release agent for easier removal of mounts from castable molds or compression mounting presses.
Leica Biosystems White Super Cassettes, 100/Case - Histology tissue cassettes
Leica Biosystems White Super Cassettes are disposable tissue cassettes intended for routine histology processing, embedding, and short-term specimen storage. Packaged 100 per case to support consistent specimen containment and efficient laboratory workflows.
- White color for easy specimen visibility.
- Includes 100 cassettes per case.
- Compatible with standard tissue processors and embedding stations.
- Dimensions: 3 x 2 x 3/4 in.
- Designed for routine biopsy and surgical specimens.
Ted Pella Inc Peel-A-Way 22 x 40mm x 20mm deep, rectangular
These tear away molds are useful for most epoxy and acrylic resin embedding media and for paraffin waxes. Especially suited for use with paraffin. These molds may be used under anaerobic conditions. Peel-A-Way I.D. Tabs are for use as identification with the Peel-A-Way embedding molds (8000 per book).
Ted Pella Inc PELCO FLAT EMBEDDING MOLDS
Alphanumeric self-impression cavities, pretrimmed end. available in blue, white, or translucent silicone rubber. Maximum temperature: 218a Deg. C (425a Deg. F). all PELCOa Silicone Rubber Molds are made from the highest quality silicone rubber available. With care they will last a long time. after polymerization in a 60a Deg. C oven, let molds cool before removing blocks. This precaution will increase the lifespan of the mold. Using silicone rubber with Spurr's Resin will significantly reduce the lifespan of the molds.
Electron Microscopy Sciences Gilder Standard Square 200 mesh Nickel Grid
A reliable support specimen grid source. Features well-defined grid bars, maximum open area, and a matt/shiny side. Each grid is individually inspected. 3.05 mm diameter, 0.7 mil (18 um) thickness.
Grid: Nickel
Pitch: 125 µm
Hole: 90 µm
Bar: 35 µm
:
Electron Microscopy Sciences EMS Replacement Paraffin Tapper, 22 x 22 mm, 1.5 mm thick
Paraffin tappers hold the heat so the tissue stays flat in the mold and is embedded in the same plane for easier cutting. The paraffin tappers are helpful with multiple piece skins, large pieces of uterus, and even those multi-piece biopsies. They reduce re-cuts and re-embeds, as the tissue is perfectly embedded in the embedding mold the first time.
Size: 22 x 22 mm
Thickness: 1.5 mm
Electron Microscopy Sciences Conductive Black Single Wafer Container, 6", Polypropylene Material, 160 x 11 mm
The carriers are used for storage and or shipping wafers. They prevent all types of damage and contamination to the wafer during shipping and even storage. Each of the containers are packed in 1000 class clean room and bag. The set includes the Container , the cover and the spring.
Use: 6" (150mm)
Material: Polypropylene
Dimensions: 160 x 11 mm
Electron Microscopy Sciences Plastic Tissue Capsule
Plastic tissue capsules molded from polyethylene and resistant to all processing chemicals, including Zenker's Fixative. A three-compartment divider which is removable for specimens up to 35 mm. A weighted end floats the capsule in a upright position to conserve space. Perforated on the top and bottom for better circulation of the fluid. Snap-on hinged cover.
MSE Supplies LLC 2 IN SAPPHIRE WAFER APLANE (11
2 in Sapphire Wafer Aplane(11-20) SingleCrystal Al2O3, SSP
LabScientific Replacement plastic liner for wax trimmer (XH-90). 50/pack
Replacement plastic Liner for Wax Trimmer(XH-90); 50/pk.
Electron Microscopy Sciences Wafer-Mount™ 559
Available in sheet form 10"x10" (254x254 mm). To use, remove the paper backing exposing the adhesive layer. The substrate is positioned on the film and pressed down firmly so that it adheres to the plastic film. No heating is required. The wafer mounted on the plastic film can then be held down using a vacuum manifold or mechanical means for dicing or scribing. After dicing or scribing, the parts can be separated from the wafer-mount 559 film by washing in acetone or MEK. Ideal for holding down silicon wafers, alumina, or glass substrates for scribing.
Electron Microscopy Sciences Gilder Hexagonal 100 mesh Copper Grid
A reliable support specimen grid source. Features: well-defined grid bars, maximum open area, and a matt/shiny side. Each grid is individually inspected. The copper grids with palladium plating offers better grid strength and avoids tarnishing. 3.05 mm diameter, 0.7 mil (18um) thickness.
Grid: Copper
Pitch: 250 µm
Hole: 215 µm
Bar: 35 µm
Electron Microscopy Sciences Gilder Standard Square 100 mesh Copper Grid
A reliable support specimen grid source. Features well-defined grid bars, maximum open area, and a matt/shiny side. Each grid is individually inspected. 3.05 mm diameter, 0.7 mil (18 um) thickness.
Grid: Copper
Pitch: 250 µm
Hole: 205 µm
Bar: 45 µm
:
Electron Microscopy Sciences Wafer-Mount™ 559
Available in sheet form 10"x10" (254x254 mm). To use, remove the paper backing exposing the adhesive layer. The substrate is positioned on the film and pressed down firmly so that it adheres to the plastic film. No heating is required. The wafer mounted on the plastic film can then be held down using a vacuum manifold or mechanical means for dicing or scribing. After dicing or scribing, the parts can be separated from the wafer-mount 559 film by washing in acetone or MEK. Ideal for holding down silicon wafers, alumina, or glass substrates for scribing.