Embedding Cassettes and Storage
Enterprise Technology Solutions Storex Industries Corporation Archive Storage Box, LTR, 24"D, Black/Gray
Rugged and reliable, this plastic archive box is designed with functionality in mind. Deep drawer holds letter-size folders. Boxes feature insert tabs to let you safely stack them up to 10 units tall. Durable construction is lightweight and mobile.
Electron Microscopy Sciences EMS Replacement Paraffin Tapper, 22 x 22 mm, 1.5 mm thick
Paraffin tappers hold the heat so the tissue stays flat in the mold and is embedded in the same plane for easier cutting. The paraffin tappers are helpful with multiple piece skins, large pieces of uterus, and even those multi-piece biopsies. They reduce re-cuts and re-embeds, as the tissue is perfectly embedded in the embedding mold the first time.
Size: 22 x 22 mm
Thickness: 1.5 mm
Electron Microscopy Sciences Histo-Container Semiclear, 120 ml, 75 mm height, 48 mm I.D.
For the storage and transport of histology specimens, these containers are made from durable polypropylene and have leak proof seal caps. Supplied with tight-fitting screw caps and graduated on three sides.
Capacity: 120 ml
Height: 75 mm
I.D.: 48 mm
Electron Microscopy Sciences Conductive Black Single Wafer Container, 3", Polypropylene Material, 84 x 11 mm
The carriers are used for storage and or shipping wafers. They prevent all types of damage and contamination to the wafer during shipping and even storage. Each of the containers are packed in 1000 class clean room and bag. The set includes the Container , the cover and the spring.
Use: 3" (75mm)
Material: Polypropylene
Dimensions: 84 x 11 mm
eMolecules 105-50-0 | Diethyl 3-oxopentanedioate | Ambeed | MFCD00009200 | 202.206 | C9H14O5 | 95.000 | CCOC(=O)CC(=O)CC(=O)OCC | 1000g | 600826776
Diethyl 3-oxopentanedioate | Ambeed | 105-50-0 | MFCD00009200 | 202.206 | C9H14O5 | 95.000 | CCOC(=O)CC(=O)CC(=O)OCC | 1000g | 600826776
Electron Microscopy Sciences PTFE Flat Embedding Mold Set
The PTFE Flat Embedding Mold offers flat embedding for most resins, including LR White, LR Gold, JB-4, Immuno-Bed and Lowicryl and can be used for both UV/low temperature and thermal cure. It may be used as a substitution for the silicone molds. The individual cavities are pre shaped to reduce block trimming.
For curing anaerobic material, we recommend using Aclar film, cut-to-size of the mold and lower on top of the mold after you ʽjust over-fill' the cavities with embedding resin. Due to the flexibility of the PTFE, you just bend the mold to pop out the cured resin blocks. After all the cast blocks have been removed, reinsert the mold to its holder to re-shape the mold.
The mold holder is machined from aluminum and anodized black. Each of the 18 cavities measures 5 mm W x 14 mmL x 4 mm deep. Overall mold measures: 5 1/2" x 3" x 1/4” (140x50x8 mm).
MSE Supplies LLC 2 IN SAPPHIRE WAFER APLANE (11
2 in Sapphire Wafer Aplane(11-20) SingleCrystal Al2O3, SSP
Electron Microscopy Sciences Transparent Wafer Container Single, 1.5", Polypropylene Material, 48 x 10 mm
The carriers are used for storage and or shipping wafers. They prevent all types of damage and contamination to the wafer during shipping and even storage. Each of the containers are packed in 1000 class clean room and bag. The set includes the Container , the cover and the spring. Boxes are transparent and made from Anti-Electrostatic Polycarbonate.
Use: 1.5" (38mm)
Material: Polypropylene
Dimensions: 48 x 10 mm
Electron Microscopy Sciences Histo-Container White, 2L, 120 mm height, 184 mm I.D.
For the storage and transport of histology specimens, these containers are made from durable polypropylene and have leak proof seal caps. Supplied with snap-top lids and bucket carry handles and without graduations.
Capacity: 2L
Height: 120 mm
I.D.: 184 mm
Electron Microscopy Sciences Gilder Hexagonal 100 mesh Copper Grid
A reliable support specimen grid source. Features: well-defined grid bars, maximum open area, and a matt/shiny side. Each grid is individually inspected. The copper grids with palladium plating offers better grid strength and avoids tarnishing. 3.05 mm diameter, 0.7 mil (18um) thickness.
Grid: Copper
Pitch: 250 µm
Hole: 215 µm
Bar: 35 µm
Andwin Scientific CRYO3 CryoMold, Standard, 100/cs
Plastic Cryomold, round shapes with a tab for easy handling. Available in standard and biopsy configurations. The standard mold measures 22 mm (D) x 5 mm deep. The Biopsy mold measures 15 mm (D) x 5 mm deep.
Electron Microscopy Sciences Gilder Standard Square 100 mesh Copper Grid
A reliable support specimen grid source. Features well-defined grid bars, maximum open area, and a matt/shiny side. Each grid is individually inspected. 3.05 mm diameter, 0.7 mil (18 um) thickness.
Grid: Copper
Pitch: 250 µm
Hole: 205 µm
Bar: 45 µm
: