Hydrophobic Interaction Chromatography Reagents and Supplies
- (1)
- (2)
- (2)
- (2)
- (1)
- (7)
- (6)
- (8)
- (1)
- (1)
- (1)
- (1)
- (2)
- (2)
- (1)
- (1)
- (4)
- (2)
- (2)
- (3)
- (5)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
Filtered Search Results
Cytiva HIC (Hydrophobic Interaction Chromatography) Media
Features high chemical stability, properties to increase productivity and epoxy coupling
| Particle Size | 75 μm |
|---|---|
| Flow Rate | 600 cm/Hoμr |
| Binding Capacity | 27 mg BSA/mL |
| Storage Buffer | 20% Ethanol |
| pH Range | 3 to 13 |
| Quantity | 25 mL |
| Storage Requirements | 4°C to 30°C |
| For Use With (Application) | For Used in The Capture and Intermediate Stages of Protein PurifiCatIon |
| Height (Metric) Bed | 20 cm |
| Media Type | Highly Cross-Linked Agarose |
| Max. Pressure | 300 kPa |
| Particle Size | 45 to 165 μm |
|---|---|
| Ligand Type | Butyl |
| Height (Metric) | 25 mm |
| pH Range | 3 to 13 |
| Product Type | HiTrap Butyl FF |
| Material | Polypropylene |
| Storage Requirements | 4°C to 30°C, 20% Ethanol |
| For Use With (Application) | For Screening of Selectivity, Binding and Elution Conditions, as Well as Small Scale Purifications |
| Support Type | 4% Cross-linked Agarose |
| Media Type | Butyl Sepharose 4 Fast Flow |
| Max. Pressure | 5 bar [0.5 MPa] (70 psi) |
| Height (English) | 0.984 in. |
Cytiva HiTrap™ Butyl HP Columns
Prepacked columns for convenient and fast separations. Cytiva HiTrap™ Butyl HP Columns are used for small-scale protein purification as well as for screening of binding and elution conditions.
| Particle Size | 24 to 44 μm |
|---|---|
| Ligand Type | Butyl |
| Height (Metric) | 30 mm |
| pH Range | 3 to 13 |
| Product Type | HiTrap Butyl HP |
| Material | Polypropylene |
| Storage Requirements | 4°C to 30°C, 20% Ethanol |
| For Use With (Application) | For Screening of Selectivity, Binding and Elution Conditions, as Well as Small Scale Purifications |
| Support Type | Cross-linked Agarose |
| Media Type | Butyl Sepharose |
| Max. Pressure | 5 bar [0.5 MPa] (70 psi) |
| Height (English) | 1.181 in. |
Cytiva HiTrap™ Phenyl HP Columns
Prepacked columns for convenient and fast separations. Cytiva Lifescience™ HiTrap™ Phenyl HP Columns are designed for use with a syringe, laboratory pump or chromatography system.
| Particle Size | 24 to 44 μm |
|---|---|
| Ligand Type | Phenyl |
| pH Range | 3 to 13 |
| Product Type | HiTrap Phenyl HP |
| Material | Polypropylene |
| Storage Requirements | 4°C to 30°C, 20% Ethanol |
| For Use With (Application) | For Screening of Selectivity, Binding and Elution Conditions, as Well as Small Scale Purifications |
| Support Type | 6% Cross-linked Agarose |
| Media Type | Phenyl Sepharose HP |
| Max. Pressure | 5 bar [0.5 MPa] (70 psi) |
Cytiva HiTrap™ Capto™ Octyl HIC Column
Prepacked with Capto™ Octyl hydrophobic interaction chromatography (HIC) resin for small scale purification.
| Particle Size | 75 μm |
|---|---|
| Ligand Type | Octyl |
| Content And Storage | 4°C to 30°C |
| Binding Capacity | 25 mg |
| Storage Buffer | 20% Ethanol |
| pH Range | 3 to 13 |
| Product Type | HiTrap Octyl FF |
| Quantity | 5/Pk. |
| Height (Metric) Bed | 25 mm |
| Max. Pressure | 3 bar |
Cytiva SOURCE™ 15PHE Tricorn™ Column for HIC
Pre-packed column for rapid, preparative hydrophobic interaction chromatography of proteins and oligonucleotides
| Particle Size | 45 to 165 μm |
|---|---|
| Ligand Type | Phenyl |
| Height (Metric) | 25 mm |
| pH Range | 3 to 13 |
| Product Type | HiTrap Phenyl FF (Low Sub) |
| Material | Polypropylene |
| Storage Requirements | 4°C to 30°C, 20% Ethanol |
| For Use With (Application) | For Screening of Selectivity, Binding and Elution Conditions, as Well as Small Scale Purifications |
| Support Type | 6% Cross-linked Agarose |
| Media Type | Phenyl Sepharose 6 Fast Flow (low sub) |
| Max. Pressure | 5 bar [0.5 MPa] (70 psi) |
| Height (English) | 0.984 in. |
Cytiva Phenyl Sepharose™ CL-4B Gel
For immunoglobulin purification and fractionation as well as immunoprecipitation procedures
Cytiva HiTrap Capto Phenyl ImpRes
HiTrap Capto Phenyl ImpRes is prepacked with BioProcess Capto Phenyl ImpRes resins for screening and small-scale protein purifications using hydrophobic interaction chromatography.
Cytiva HiTrap Capto Butyl ImpRes
A ready-to-use column prepacked with BioProcess Capto Butyl ImpRes resins for screening and small-scale protein purification using hydrophobic interaction chromatography.
Cytiva HiTrap™ Butyl-S FF Columns
Designed for purification of relatively strong hydrophilic molecules at low salt concentrations
| Particle Size | 45 to 165 μm |
|---|---|
| Ligand Type | Butyl-S |
| pH Range | 3 to 13 |
| Product Type | HiTrap Butyl-S FF column |
| Material | Polypropylene |
| Support Type | 6% Cross-linked Agarose |
Cytiva HiTrap™ Capto™ Butyl
Hydrophobic interaction chromatography (HIC) resins used in the capture and intermediate stages of protein purification.
| Particle Size | 75 μm |
|---|---|
| Ligand Type | Butyl |
| Flow Rate | 0.25 mL/min. |
| Content And Storage | 4°C to 30°C |
| Binding Capacity | 27 mg/mL |
| Storage Buffer | Ethanol |
| pH Range | 3 to 13 |
| Product Type | Hydrophobic Interaction Chromatography (HIC) Selection Kit |
| Quantity | 5/Pk. |
| Material | Agarose |
| Height (Metric) Bed | 25 mm |
Cytiva HiTrap™ Capto™ Phenyl (High Sub)
Hydrophobic interaction chromatography (HIC) resins used in the capture and intermediate stages of protein purification.
| Particle Size | 75 μm |
|---|---|
| Ligand Type | Phenyl |
| Flow Rate | 600 cm/hr. |
| Content And Storage | 4°C to 30°C |
| Binding Capacity | 27 mg/mL |
| pH Range | 3 to 13 |
| Product Type | Hydrophobic Interaction Chromatography (HIC) Selection Kit |
| Quantity | 5/Pk. |
| Material | Agarose |
| Height (Metric) Bed | 25 mm |
Cytiva Untagged Column Package
Combines cation and anion exchange with size exclusion chromatography for purification of most untagged or native proteins
Cytiva HiTrap™ Capto™ HIC Selection Kit
Five Capto™ Hydrophobic Interaction Chromatography Resins in HiTrap™ Columns for resin selection and screening protein purification conditions